Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

The new NoTA system architecture opens up the market for competition

05.06.2008
The business impact of the new architecture is discussed in the NoTA2008 Conference organized by VTT Technical Research Centre of Finland.

NoTA (Network on Terminal Architecture) is positioned to revolutionize the development of mobile and embedded system device platforms by enabling subsystem and technology innovations also at hardware level.

NoTA will radically decrease the amount of integration work required in product development, and consequently increase fair competition between technology vendors. The objective of NoTA is to develop into a design flow which unites different industries, becoming a concrete example of digital convergence. The NoTA2008 Conference organized by VTT Technical Research Centre of Finland is the first international event focusing on this subject.

VTT has been doing research on embedded system design for 10 years and considers NoTA to have significant impact in the future.

The next big turning point in the industry is expected to be the diffusion of digital convergence. This means that products and services will be designed in the same way irrespective of the type of industry. The same design flow will be applied for developing houses, cars, and mobile phones alike. The launch of NoTA is the first time that digital convergence is truly put into practice. The NoTA concept was initially developed by Nokia Research Center, but has now been adopted by a growing number of companies. The royalty-free licensing and usage models will support the openness and rapid exploitation of NoTA.

NoTA is a modular service based system architecture for mobile and embedded devices. It aims at solving the gaps between current product platforms and future requirements by proving superior performance and making effective horizontalisation possible via eased integration.

NoTA entails various benefits in product development. Time-to-market is faster thanks to NoTA sub-systems, which reduce the time needed for vendor-specific requirements definition, implementation and integration phases. Scalability in integration level allows product companies to do fast cost-optimization without major R&D effort. Cost reductions are also achieved through more open competition, and reduced sub-system adaptation work. NoTA cuts down the complexity of devices, and clears the way for radical technology innovations also at hardware level by making the business more open. Moreover, NoTA helps product companies to meet end-user needs through enabling higher performance and completely new features in digital convergence devices.

The NoTA2008 Conference organized in Helsinki on 11th June will bring together industry representatives from all over the world to hear how NoTA will change the market. Top speakers will address new business opportunities, service concepts and technology issues developing within the NoTA ecosystem.

NoTA2008 Conference Wed 11th June, 9.00 – 17.30
Hilton Hotel Kalastajatorppa, Kalastajatorpantie 1, Helsinki
There is a possibility for interviewing the keynote speakers at 10.30. To register for this press conference please register by e-mail to maaretta.torro@vtt.fi.

Full program of the conference and more info at www.vtt.fi/nota2008.

Additional information:

Prof. Tatu Koljonen
Vice President, Strategic Research, VTT
tel. +358 20 722 2117
tatu.koljonen@vtt.fi
Further information on VTT:
Senior Vice President
Olli Ernvall
Tel. +358 20 722 6747
olli.ernvall@vtt.fi
VTT Technical Research Centre of Finland is the biggest contract research organization in Northern Europe. VTT provides high-end technology solutions and innovation services. From its wide knowledge base, VTT can combine different technologies, create new innovations and a substantial range of world-class technologies and applied research services, thus improving its clients' competitiveness and competence. Through its international scientific and technology network, VTT can produce information, upgrade technology knowledge and create business intelligence and value added to its stakeholders.

Olli Ernvall | VTT
Further information:
http://www.vtt.fi/?lang=en
http://www.vtt.fi/nota2008

More articles from Event News:

nachricht Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting
13.02.2017 | Kuratorium für die Tagungen der Nobelpreisträger in Lindau e.V.

nachricht Complex Loading versus Hidden Reserves
10.02.2017 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF

All articles from Event News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>