Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Fall bonefish census sounds warning bell that warrants careful future monitoring

23.11.2010
This October more than 60 guides and anglers in the Florida Keys poled across the flats from Biscayne Bay to the Marquesas, assisting in the annual bonefish census.

This year's count, held in extremely difficult weather with lowered visibility, was down by 25-percent from an 8-year mean estimate of 316,805 bonefish to a new low of about 240,000 bonefish, according to Professor Jerry Ault, a fisheries scientist with the University of Miami's Rosenstiel School of Marine & Atmospheric Science.

"Since 2003 we have conducted an annual bonefish census throughout the Keys," said Ault. "It provides researchers, like me, and fisheries managers with an early warning system to identify trends and population changes." This year guides saw fewer bonefish in historically productive areas, a possible reflection of real population changes coupled with differences in the coastal environment. Future counts will be looking for evidence of this as an emerging population trend.

"Bonefish are a good indicator of overall ecological health. These highly mobile fish feed on small marine organisms at the base of the food chain like shrimps, crabs and baitfish; thus, the health of the bonefish population is greatly dependent on the status of the ecosystem as a whole. A change in the population is likely to signal greater issues throughout the coastal ecosystem and provide clues that we can study and address before the situation becomes critical," Ault added.

Ault suggests that if bonefish abundance did decline in 2010, it is still too early to pinpoint the reasons. However, he points out that last winter's January extended cold wave was particularly lethal to tropical gamefish species including tarpon, snook and bonefish, and to their prey. Water temperatures dipped as low as 44oF for periods of more than 3.5 days, and killed mostly small (and young) bonefish in Biscayne and Florida Bays.

The census, conducted in collaboration with local fishermen and guides, as well as the Bonefish & Tarpon Trust (BTT), and the Florida Keys Fishing Guide Associations, is important because bonefish are a major component of Florida's $5.5 billion sport-fishing industry. Based on past results, Ault estimates each bonefish in Florida is worth about $3,500 per year to the industry or about $75,000 over its lifetime.

"We are especially grateful to the guides and anglers of the Keys who continue to work closely with us because one of the great challenges we face is the lack of long-term historical data on the Florida bonefish population," said Tom Davidson, chairman of the BTT. "The datasets we are now developing are just the beginning. We are still learning about natural variations in these dynamic systems, so we can't really be sure yet about the significance of these ups and downs. However, these types of major population fluctuations will ensure that we remain vigilant."

About the Bonefish & Tarpon Trust

Bonefish & Tarpon Trust is a non-profit, science-based conservation organization dedicated to ensuring that bonefish, tarpon, and permit populations, and the fisheries they support, remain healthy and helping to restore fisheries that have declined. BTT accomplishes this mission by funding conservation-focused research; working with local, national, and regional resource management agencies to improve regulations to protect these fisheries; and educating anglers and the public. BTT uses scientific findings to advocate for fisheries conservation and works to ensure coastal habitats used by bonefish, tarpon, and permit are protected. For more information, please visit www.tarbone.org.

About the University of Miami's Rosenstiel School

The University of Miami's mission is to educate and nurture students, to create knowledge, and to provide service to our community and beyond. Committed to excellence and proud of the diversity of our University family, we strive to develop future leaders of our nation and the world. Founded in the 1940's, the Rosenstiel School of Marine & Atmospheric Science has grown into one of the world's premier marine and atmospheric research institutions. Offering dynamic interdisciplinary academics, the Rosenstiel School is dedicated to helping communities to better understand the planet, participating in the establishment of environmental policies, and aiding in the improvement of society and quality of life.

Barbra Gonzalez | EurekAlert!
Further information:
http://www.rsmas.miami.edu

More articles from Ecology, The Environment and Conservation:

nachricht Bioinvasion on the rise
15.02.2017 | Universität Konstanz

nachricht Litter Levels in the Depths of the Arctic are On the Rise
10.02.2017 | Alfred-Wegener-Institut, Helmholtz-Zentrum für Polar- und Meeresforschung

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Multicrystalline Silicon Solar Cell with 21.9 % Efficiency: Fraunhofer ISE Again Holds World Record

20.02.2017 | Power and Electrical Engineering

Biocompatible 3-D tracking system has potential to improve robot-assisted surgery

17.02.2017 | Medical Engineering

Real-time MRI analysis powered by supercomputers

17.02.2017 | Medical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>