Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Constructed for easy installation - New shaft couplings for high torques of up to 110,000 Nm

12.08.2011
High screw tightening torques can prove a real challenge when installing large shaft couplings, in particular in restricted space conditions. For this reason, new ROBA®-DS disk pack coupling construction sizes have been equipped with an easy to install, positive locking connection which works at very low tightening torques.

mayr® power transmission has extended the scope of performance on the tried and tested ROBA®-DS disk pack couplings. The new construction sizes cover a nominal torque range from 22,000 to 110,000 Nm. In these sizes, the flexible disk pack is connected via positive locking and backlash-free with the mounted parts.


Far less screw tightening torque is required for the positive locking cone connection of the new ROBA®-DS disk pack couplings in comparison to frictionally locking constructions.

A new cone connection means that the screw tightening torques can be reduced to a fraction of their original value in comparison with standard frictionally locking constructions. This makes installation and de-installation substantially easier. In addition, the units for installation and de-installation of the coupling cannot be displaced.

On large couplings, the ease of installation is also an important economic aspect. Simple and quick installation can save many hours of work and unnecessary costs. Apart from that, handling large couplings is a back-breaking job. Why should things be made more difficult for fitters than necessary?
ROBA®-DS disk pack couplings are extremely robust, are not sensitive to high and low temperatures and are extremely torsionally rigid and maintenance-free. They transmit the torque backlash-free and without wear and compensate for shaft misalignment. On double-jointed couplings, the component between the two disk packs can be varied very flexibly in length for adjustment to the shaft distance. Due to their superb characteristics, disk pack couplings are frequently the preferred choice if high torques are to be transferred.

Chr. Mayr GmbH + Co.KG
Eichenstraße 1, 87665 Mauerstetten
Tel. 08341/804-0, Fax 08341/804-421
eMail: info@mayr.de

Hermann Bestle | Chr. Mayr GmbH + Co.KG
Further information:
http://www.mayr.com

More articles from Machine Engineering:

nachricht Making lightweight construction suitable for series production
24.04.2017 | Laser Zentrum Hannover e.V.

nachricht It Takes Two: Structuring Metal Surfaces Efficiently with Lasers
15.03.2017 | Fraunhofer-Institut für Lasertechnik ILT

All articles from Machine Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

Scientist invents way to trigger artificial photosynthesis to clean air

26.04.2017 | Materials Sciences

Ammonium nitrogen input increases the synthesis of anticarcinogenic compounds in broccoli

26.04.2017 | Agricultural and Forestry Science

SwRI-led team discovers lull in Mars' giant impact history

26.04.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>