Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Research Channels Powerful Kansas Wind to Keep Electricity Running

23.03.2011
One of Kansas' most abundant natural resources may hold the key to preventing major power outages. A team of Kansas State University engineers is researching ways to use Kansas wind and other distributed energy sources to avoid cascading failures.

Sakshi Pahwa, doctoral student in electrical and computer engineering, India, explored the topic for her recently completed master’s project, "Distributed Sources and Islanding to Mitigate Cascading Failures in Power Grid Networks." The project was a winner at the recent Capitol Graduate Research Summit in Topeka.

Pahwa's co-advisers on the project include Caterina Scoglio, associate professor of electrical and computer engineering, and Noel Schulz, Paslay professor of electrical and computer engineering and K-State's first lady. Pahwa is continuing this work for her doctoral research under Scoglio and Ruth Douglas Miller, associate professor of electrical and computer engineering.

The research looks at using distributed energy sources to avoid cascading failures in power grids. A cascading failure occurs when an interconnected part of a power system fails and then triggers successive parts to fail – like the one that happened in the Northeast Blackout of 2003, a power outage that affected 55 million people in the United States and Canada.

To prevent cascading failures researchers are investigating a technique called islanding, which works to minimize the impact of a power system fault to a small area. Islanding prevents this fault from affecting other areas and stops further disturbances in the network.

"We used a network partitioning algorithm, and then depending on where the fault is I can disconnect that portion of the network," Pahwa said. "That disconnected portion can then be powered using renewable or distributed energy sources, such as wind turbines or solar panels, and the remaining parts are still being powered by conventional sources."

The Kansas wind can potentially provide abundant renewable energy that could power the disconnected portion of the network. For data collecting and testing purposes, the researchers plan to use the university's wind turbine north of campus, near the intersection of Denison and Kimball avenues, as well as four other wind turbines installed at the Riley County Public Works Facility.

The university turbine was installed for Wind for Schools, a project led by Miller, director of the Kansas Wind Application Center. The Riley County wind turbines were installed for the Resourceful Kansas project, a cooperative effort between Miller, Scoglio, Riley County and the Kansas City-based consulting firm GBA, and funded by the U.S. Department of Energy.

"We need to set up power systems that are reliable and stable so that when that wind is blowing, we can use that power, but when the wind isn’t blowing, there are also stable systems," Schulz said. "That's what this project is about -- modeling the network so we understand the different aspects for when there are changes, when the wind blows, when it doesn't and how that affects the power system."

Scoglio and Pahwa started the project when Pahwa was a master's student. As they began studying complex network systems, they turned to Schulz, a power grid expert who has done previous work with islanding. They also collaborated with power systems expert Anil Pahwa, professor of electrical and computer engineering, and Shelli Starrett, associate professor of electrical and computer engineering.

"With the proper design and the right intelligence, some of the problems related to power failures can be prevented," Scoglio said. "We need to make sure that the communication network will monitor the network and detect the problem and will implement the reaction securely to implement these solutions."

Sakshi Pahwa's research aims to not only study the problem from a theoretical aspect, but also provide practical solutions to real-world problems. It also fits in with the Renewable Energy Standards Act, which was signed in 2009 and states that major Kansas utilities should be able to generate about 10 percent of their power from renewable sources by 2011 and 20 percent by 2020.

"This project benefits the state because it reduces carbon emissions through renewable energy," Pahwa said. "It is a good opportunity to create jobs, and renewable energy incorporation is also a support to the conventional sources so we don’t need to import fuels from other countries. It helps the economy as well."

Pahwa's research was supported by the four companies involved in the K-State Electrical Power Affiliates Program: Westar Energy, Burns and McDonnell, Nebraska Public Power District and Omaha Public Power District. Schulz directs the program, which supports undergraduate and graduate research programs.

"This research is a benefit for Kansas and the whole nation because I think that innovation, coming from research and support from companies such as those that are part of the power affiliates, can really bring the country back to a better economic situation," Scoglio said. "Innovation comes with jobs and can really improve the whole nation."

Noel Schulz, 785-532-5600, noels@k-state.edu,
http://www.k-state.edu/media/mediaguide/bios/nschulzbio.html;
Caterina Scoglio, 785-532-4646, caterina@k-state.edu;
and Sakshi Pahwa, sakship@k-state.edu

Noel Schulz | Newswise Science News
Further information:
http://www.k-state.edu

More articles from Power and Electrical Engineering:

nachricht A big nano boost for solar cells
18.01.2017 | Kyoto University and Osaka Gas effort doubles current efficiencies

nachricht Multiregional brain on a chip
16.01.2017 | Harvard John A. Paulson School of Engineering and Applied Sciences

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: How gut bacteria can make us ill

HZI researchers decipher infection mechanisms of Yersinia and immune responses of the host

Yersiniae cause severe intestinal infections. Studies using Yersinia pseudotuberculosis as a model organism aim to elucidate the infection mechanisms of these...

Im Focus: Interfacial Superconductivity: Magnetic and superconducting order revealed simultaneously

Researchers from the University of Hamburg in Germany, in collaboration with colleagues from the University of Aarhus in Denmark, have synthesized a new superconducting material by growing a few layers of an antiferromagnetic transition-metal chalcogenide on a bismuth-based topological insulator, both being non-superconducting materials.

While superconductivity and magnetism are generally believed to be mutually exclusive, surprisingly, in this new material, superconducting correlations...

Im Focus: Studying fundamental particles in materials

Laser-driving of semimetals allows creating novel quasiparticle states within condensed matter systems and switching between different states on ultrafast time scales

Studying properties of fundamental particles in condensed matter systems is a promising approach to quantum field theory. Quasiparticles offer the opportunity...

Im Focus: Designing Architecture with Solar Building Envelopes

Among the general public, solar thermal energy is currently associated with dark blue, rectangular collectors on building roofs. Technologies are needed for aesthetically high quality architecture which offer the architect more room for manoeuvre when it comes to low- and plus-energy buildings. With the “ArKol” project, researchers at Fraunhofer ISE together with partners are currently developing two façade collectors for solar thermal energy generation, which permit a high degree of design flexibility: a strip collector for opaque façade sections and a solar thermal blind for transparent sections. The current state of the two developments will be presented at the BAU 2017 trade fair.

As part of the “ArKol – development of architecturally highly integrated façade collectors with heat pipes” project, Fraunhofer ISE together with its partners...

Im Focus: How to inflate a hardened concrete shell with a weight of 80 t

At TU Wien, an alternative for resource intensive formwork for the construction of concrete domes was developed. It is now used in a test dome for the Austrian Federal Railways Infrastructure (ÖBB Infrastruktur).

Concrete shells are efficient structures, but not very resource efficient. The formwork for the construction of concrete domes alone requires a high amount of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

12V, 48V, high-voltage – trends in E/E automotive architecture

10.01.2017 | Event News

2nd Conference on Non-Textual Information on 10 and 11 May 2017 in Hannover

09.01.2017 | Event News

Nothing will happen without batteries making it happen!

05.01.2017 | Event News

 
Latest News

A big nano boost for solar cells

18.01.2017 | Power and Electrical Engineering

Glass's off-kilter harmonies

18.01.2017 | Materials Sciences

Toward a 'smart' patch that automatically delivers insulin when needed

18.01.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>