Response capacity in Arctic, already stretched, faces fast-growing challenges as North develops: Report
Inadequate risk assessment, planning and training are among the gaps in many parts of Canada's Arctic, compounding the challenges of brutal weather, vast distances, difficult transportation and spotty communications and exposing the region's residents to the ever increasing risks of natural and man-made disasters and emergencies, according to a major new report released today.
In the report experts identify seven key recommendations and set priorities for emergency preparedness, synthesized from a series of hearings in each of Canada's three northern territories, concluded by a national roundtable hosted by the Munk-Gordon Arctic Security Program.
The report details emergency management capacities in the Arctic today and its future needs in light of rapidly expanding international interest in the region's natural resources, as a shipping corridor and other purposes. It examines the overall emergency management and the related policy environment in Canada, and includes search and rescue (SAR).
"Despite the best efforts of volunteers, who form the backbone of emergency response in the North, there are still deficiencies in the system caused by a lack of tools, plans, and training that are putting lives at risk. This risk and severity of emergencies will only increase with climate change and intensified activity in the region," says Sara French, director of the Munk-Gordon Arctic Security program, a collaboration between the Walter and Duncan Gordon Foundation and the Munk School of Global Affairs at the University of Toronto.
"Floods, forest fires, avalanches, earthquakes, pandemics-the list of emergency concerns is long. We hope this report helps to guide preparations for adequate response ability in Canada's North."
In the North, major emergency responses are typically launched from Halifax, Trenton or Victoria -five or six hours away by plane in good weather.
Processes used to trigger federal assistance vary between jurisdictions, creating complication, and responders from the south are often unfamiliar with the area and general circumstances with which they are dealing.
The new report builds on one last fall on federal search and rescue activities prepared by the federal Auditor General's Office, which underlined a need to invest in new equipment, improve access to training and accreditation of SAR staff, update the Search and Rescue Mission Management System and complete tendering on fixed-wing search and rescue aircraft.
According to the new report, the federal and public dialogue on emergency management has tended to emphasize the search for and rescue of visitors to the region, as opposed to the emergency response needs more generally of northern residents. "This has created the perception among many in the North that they are taking a backseat to visitors to the region, especially concerns related to increase use of the Northwest Passage."
The report notes that hundreds of ground and inland water searches occur every year.
More common emergencies include forest and tundra fires, floods, power outages, blizzards - events that "are becoming not only more frequent, but more severe." As well, "there is at least one earthquake a week in the North, but to date this has luckily only happened outside of populated areas."
The report points to an event in August, 2010 as a harbinger of future calamities: the cruise ship Clipper Adventurer hit a rock, making refugees of more than 120 passengers in the small hamlet of Kugluktuk, Nunavut, population 1,500. Without any plan in place, the hamlet did their best to take care of the stranded passengers' basic needs.
"But just because Kugluktuk was able to respond, does not mean it was 'ready' in the common understanding of emergency preparedness. The hamlet's planning priorities are education and health, with search and rescue fifth on the list and power failures during the winter months topping the list of community emergency concerns."
"A cruise ship running aground was not even on their radar."
Though local emergency responders will always take action whenever a situation arises, there is often confusion as to who is supposed to be in charge along increasingly busy, especially in coastal communities.
According to the report, notions about emergency response needs in the North are also skewed by the media's tendency "to focus on big, newsworthy events such as oil spills or cruise ship accidents - not the daily emergencies that most northerners fear, such as flooding, landslides, and forest fires."
Emergency responders revealed specific concerns around the issue of heavy jet aircraft capable of landing on gravel runways.
The Boeing 737-200 series, first produced in the 1970s, was the last commercial jet aircraft of its' size capable, when suitably modified, of landing on gravel runways. Newer models with more modern high bypass engines are not able to be modified for gravel use.
"This means that as the remaining gravel modified aircraft age and become economically nonviable there is no suitable replacement. Only 10 runways in the entire three Territories are paved, although others are sufficiently long to handle the B737. Lack of pavement is also delaying air carriers upgrading to newer, more fuel efficient, greener aircraft. This will eventually become a challenge for northern communities."
The lack of paved runways in the Arctic also limits the emergency landing options for large aircraft operating on the polar overflight routes.
The recommendations in each section of the full report flow from the discussion sessions and participants at the National Roundtable on Arctic Emergency Preparedness.
Considered the seven top recommendations:
About the Munk-Gordon Arctic Security Program
A partnership between the Canada Centre for Global Security Studies at the Munk School of Global Affairs, University of Toronto and the Walter and Duncan Gordon Foundation, the Munk-Gordon Arctic Security Program is dedicated to studying and promoting four overarching areas of concern: public opinion research, Arctic Council, Arctic Peoples and Security, and emergency management. Program details, publications and opinion polls can be accessed at http://www.gordonfoundation.ca. Follow @ArcticSecurity on Twitter.
Terry Collins | EurekAlert!
A new 3D viewer for improved digital geoscience mapping
20.09.2016 | Uni Research
The significance of seaweed
16.09.2016 | King Abdullah University of Science and Technology
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences