Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

The route to high temperature superconductivity goes through the flat land

23.11.2015

Superconductors are marvellous materials that are able to transport electric current and energy without dissipation. For this reason, they are extremely useful for constructing magnets that can generate enormous magnetic fields without melting.

They have found important applications as essential components of the Large Hadron Collider particle accelerator at CERN, levitating trains, and the magnetic resonance imaging tool widely used for medical purposes. Yet, one reason why the waiting list for an MRI scan is sometimes so long is the cost of the equipment. Indeed, superconductors have to be cooled down below one hundred degrees centigrade to manifest their unique properties, and this implies the use of expensive refrigerators.


Aalto researchers have discovered that superconductivity is possible even in a crystal where the apparent mass of the electrons is infinite. The crystal is depicted as the ordered array of orange and green balls (atoms) in the figure. Electrons with an infinite apparent mass are also called electrons in flat bands. Superconductivity can occur if the electron waves centred around the single atoms spread widely enough to overlap significantly. Then, the electrons hop from one atom to the other through the region of overlap, and the flow of the supercurrent is ensured. Remarkably, a topological invariant of the electron waves, similar to the twist of the Mobius band shown in the figure, guarantees that overlapping electron waves exist.

Credit: Aalto University, Antti Paraoanu

An important open problem in modern materials science is to understand the mechanism behind superconductivity, and in particular, it would be highly desirable to be able to predict with precision the critical temperature below which the superconducting transition occurs.

In fact, there are no currently available theories that can provide accurate predictions for the critical temperature of the most useful superconductive materials. This is unfortunate since a sound understanding of the mechanism of superconductivity is essential if we are interested in synthesizing materials that may one day achieve superconductivity at room temperature, without refrigeration.

A potential breakthrough has recently been put forward by researchers at Aalto University. Their study builds on the theory of the electronic motion in crystals developed by Felix Bloch in 1928. It is an interesting consequence of quantum mechanics that an electron that feels the electric charge of an ordered array of atoms (a crystal) can move as freely as it would in free space.

However, the crystal has the nontrivial effect of modifying the apparent mass of the electron. Indeed, electrons appear to be heavier (or lighter) in a crystal than in free space, which means that one has to push them more (or less) to make them move.

This fact has very important consequences since electrons with a larger apparent mass lead to a larger critical temperature for superconductivity. Ideally to maximize the critical temperature, we should consider electrons with infinite apparent mass or, to use the jargon of physicists, electrons in a 'flat band'. Naively we could expect that electrons with infinite mass would be stuck in place, unable to carry any current, and the essential property of superconductivity would be lost.

"I was very intrigued to find out how a supercurrent, that is, electrical current, could be carried by electrons in a flat band. We had some hints that this is in fact possible, but not a general solution of this paradox" says Aalto physics Professor Paivi Torma. Surprisingly in the world of quantum mechanics, an infinite mass does not necessarily prevent the flow of electric current.

The key to this mystery is to remember that electrons are quantum mechanical objects with both particle- and wave-like features. Prof. Paivi Torma and postdoctoral researcher Sebastiano Peotta have found that the mass alone, which is a property of particles, is not sufficient to completely characterize electrons in solids. We also need something called the 'quantum metric'.

A metric tells how distances are measured, for instance the distance between two points is different on a sphere than on a flat surface. It turns out that the quantum metric measures the spread of the electron waves in a crystal. This spread is a wave-like property.

Electrons with the same apparent mass, possibly infinite, can be associated with waves that are more or less spread out in the crystal, as measured by the quantum metric. The larger the quantum metric, the larger the supercurrent that the superconductor can carry. "Our results are very positive," says Peotta, "they open a novel route for engineering superconductors with high critical temperature. If our predictions are verified, common sense will suffer a big blow, but I am fine with that."

Another surprising finding is that the quantum metric is intimately related to an even more subtle wave-like property of the electrons quantified by an integer number called the Chern number. The Chern number is an example of a topological invariant, namely a mathematical property of objects that is not changed under an arbitrary but gentle (not disruptive) deformation of the object itself.

A simple example of a topological invariant is the number of twists of a belt. A belt with a single twist is a called a Mobius band in mathematics and is shown in the figure. A twist can be moved forward and backward in the belt but never removed unless the belt is broken. The number of twists is always an integer.

In the same way, the Chern number can take only integer values and cannot be changed unless a drastic change is performed on the electron waves. If the Chern number is nonzero, it is not possible to unknot the electron waves centred at neighbouring atoms of the material. As a consequence, the waves have to overlap, and it is this finite overlap that ensures superconductivity, even in a flat band. Aalto researchers have thus discovered an unexpected connection between superconductivity and topology.

Finland is a leader in this type of research, as flat band superconductivity was already predicted to occur at the surface of a certain kind of graphite, a result of the theoretical work of Grigory Volovik and Nikolai Kopnin (Aalto University) and Tero Heikkila (University of Jyvaskyla).

To launch the next stage of discovery, Peotta and Torma's theoretical predictions could now be tested experimentally in ultracold atomic gas systems by collaborators. "The connections I made this summer as a guest professor at ETH Zurich will be very useful for our further research on the topic," reveals Torma. "We are also intrigued by the fact that the physics we describe may be important for known superconductive materials, but it has not been noticed yet," adds Peotta.

###

The article 'Superfluidity in topologically nontrivial flat bands' was published in the journal Nature Communications: http://www.nature.com/ncomms/2015/151120/ncomms9944/full/ncomms9944.html

Image link: http://materialbank.aalto.fi:80/public/5c8da3b0c888.aspx

Contact information

Professor Paivi Torma
paivi.torma@aalto.fi
358503826770

Dr. Sebastiano Peotta
sebastiano.peotta@aalto.fi

Quantum Dynamics research group: http://physics.aalto.fi/groups/comp/qd/

Centre of Excellence in Computational Nanoscience, COMP: http://comp.aalto.fi/

Aalto University School of Science

Figure caption:

Aalto researchers have discovered that superconductivity is possible even in a crystal where the apparent mass of the electrons is infinite.

The crystal is depicted as the ordered array of orange and green balls (atoms) in the figure. Electrons with an infinite apparent mass are also called electrons in flat bands. Superconductivity can occur if the electron waves centred around the single atoms spread widely enough to overlap significantly. Then, the electrons hop from one atom to the other through the region of overlap, and the flow of the supercurrent is ensured. Remarkably, a topological invariant of the electron waves, similar to the twist of the Möbius band shown in the figure, guarantees that overlapping electron waves exist.

Aalto University. Towards a better world. Aalto University is a community of bold thinkers where science and art meet technology and business. Aalto University has six schools with nearly 20 000 students and 4 700 employees, 390 of which are professors. Our campuses are located in Espoo and Helsinki, Finland.

Media Contact

Professor Paivi Torma
paivi.torma@aalto.fi
358-503-826-770

 @aaltouniversity

http://www.aalto.fi/en/ 

Professor Paivi Torma | EurekAlert!

More articles from Materials Sciences:

nachricht Serendipity uncovers borophene's potential
23.02.2017 | Northwestern University

nachricht Switched-on DNA
20.02.2017 | Arizona State University

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>