Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Public unveiling of first C2 metro train

21.02.2014
Siemens and the Munich transport corporation (MVG) presented the first of the new C2 series trains to the public in Munich today.

This jointly unveiled train will be followed by 20 more by the year 2015, for a total of 126 new metro cars. This order marks the biggest purchase of rolling stock in the history of the Munich Underground.



Siemens and the Munich transport corporation (MVG) presented the first of the new C2 series trains to the public in Munich. This jointly unveiled train will be followed by 20 more by the year 2015, for a total of 126 new metro cars. This order marks the biggest purchase of rolling stock in the history of the Munich Underground.


C2 trains are even more spacious, comfortable and powerful than the previous models. It is a further development of the C1 train, which has been in operation for the Munich Underground since 2002. The train consists of six cars, is 115 meters long, has a 4,500 hp rating, and accelerates from 0 to 80 km/h in only 15 seconds. Video cameras, passenger TV and redesigned interior lighting using LED lamps provide a higher level of comfort for passengers. Other advantages of the train are its high capacity and availability. The new cars have a redesigned passenger area, a new seating concept and wider doors, so they can carry more passengers than the old vehicles they are replacing. A C2 train can accommodate 940 passengers.

Herbert König, Chairman of the MVG Board and Director of Transportation at SWM: “Our new underground train has an even higher capacity, a sophisticated LED-based lighting concept and new signal elements on the doors. The C2 will once again set the standards for a modern and high-performance metro system. The new train will not only provide good service, it will also impress the public with its good look!”

“Our new train is one of the most modern and most beautiful metros in the world – ‘Made in Vienna and Munich’. We are very pleased that we were able to present the first train to the public,” said Sandra Gott-Karlbauer, CEO Siemens Urban Transport.

The C2 trains are even more spacious, comfortable and powerful than the previous models. It is a further development of the C1 train, which has been in operation for the Munich Underground since 2002. The train consists of six cars, is 115 meters long, has a 4,500 hp rating, and accelerates from 0 to 80 km/h in only 15 seconds.

The C2 sets itself apart from the previous models with its higher passenger capacity and its substantially improved interior lighting. Generously dimensioned spiral lamps illuminate the entrances large, while LED light strips on the doors indicate the status of doors to ensure smooth passenger interchange. Like their predecessors, the C2 offers end-to-end accessibility and therefore a high degree of transparency, high loading capability and safety.

This new Munich metro train has already won three design awards. Only the week before last, this new-generation vehicle from Neumeister and Partner Industrial Design won the German Design Prize. According to the official wording of the award, the jury was above all impressed by the “fantastic use of light in the interior”. Before that, the new metro trains had received the Universal Design Award 2013 for their design. And, last but not least, it had garnered the Red Dot Award 2013 for product design. In the opinion of the jury, the C2 embodies the fulfillment of different user group requirements in one modern public transportation vehicle.

Follow us on Twitter:
www.twitter.com/rollingonrails
Editor
Ellen Schramke
+49 30 386 22370
ellen.schramke@siemens.com

Ellen Schramke | Siemens Rail Systems
Further information:
http://www.siemens.com/rail-system/de

More articles from Transportation and Logistics:

nachricht Discovering electric mobility in a playful way
18.08.2016 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO

nachricht Combating traffic congestion with advanced data analytics
17.08.2016 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO

All articles from Transportation and Logistics >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>