Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Suburban sprawl cancels carbon footprint savings of dense urban cores

Interactive maps of US metro areas shows striking differences between cities and suburbs

According to a new study by researchers at the University of California, Berkeley, population-dense cities contribute less greenhouse gas emissions per person than other areas of the country, but these cities' extensive suburbs essentially wipe out the climate benefits.

A CoolClimate Map of New York City's carbon footprint by zipcode tabulation area shows a pattern typical of large metropolitan areas: a small footprint in the urban core but a large footprint in surrounding suburbs.

Credit: Daniel Kammen and Christopher Jones, UC Berkeley

Dominated by emissions from cars, trucks and other forms of transportation, suburbs account for about 50 percent of all household emissions – largely carbon dioxide – in United States.

The study, which has been accepted for publication in the journal Environmental Science & Technology (ES&T), uses local census, weather and other data – 37 variables in total – to approximate greenhouse gas emissions resulting from the energy, transportation, food, goods and services consumed by U.S. households, so-called household carbon footprints.

Interactive carbon footprint maps for more than 31,000 U.S. zip codes in all 50 states are available online at

"The goal of the project is to help cities better understand the primary drivers of household carbon footprints in each location," said Daniel Kammen, Class of 1935 Distinguished Professor of Energy in the Energy and Resources Group and the Goldman School of Public Policy, and director of the Renewable and Appropriate Energy Laboratory. "We hope cities will use this information to begin to create highly tailored, community-scale climate action plans."

A key finding of the UC Berkeley study is that suburbs account for half of all household greenhouse gas emissions, even though they account for less than half the population. The average carbon footprint of households living in the center of large, population-dense urban cities is about 50 percent below average, while households in distant suburbs are up to twice the average: a factor of four difference between lowest and highest locations.

"Metropolitan areas look like carbon footprint hurricanes, with dark green, low-carbon urban cores surrounded by red, high-carbon suburbs," said Christopher Jones, a doctoral student working with Kammen in the Energy and Resources Group. "Unfortunately, while the most populous metropolitan areas tend to have the lowest carbon footprint centers, they also tend to have the most extensive high carbon footprint suburbs."

Taking into account the impact of all urban and suburban residents, large metropolitan areas have a slightly higher average carbon footprint than smaller metro areas.

Developing sustainable cities

"A number of cities nationwide have developed exceptionally interesting and thoughtful sustainability plans, many of them very innovative," Kammen said. "The challenge, however, is to reduce overall emissions. Chris and I wanted to determine analytically and present in a visually striking way the impacts and interactions of our energy, transportation, land use, shopping, and other choices. Cities are not islands: they exist in a complex landscape that we need to understand better both theoretically and empirically."

The UC Berkeley researchers found that the primary drivers of carbon footprints are household income, vehicle ownership and home size, all of which are considerably higher in suburbs. Other important factors include population density, the carbon-intensity of electricity production, energy prices and weather.

"Cities need information on which actions have the highest potential to reduce greenhouse gas emissions in their communities," explained Kammen. "There is no one-size-fits-all solution."

Efforts to increase population density, for example, appear not to be a very effective strategy locally for reducing emissions. A 10-fold increase in population density in central cities yields only a 25% reduction in greenhouse gas emissions.

"That would require a really extraordinary transformation for very little benefit, and high carbon suburbanization would result as a side effect," Jones said.

Increasing population density in suburbs appears to be an even a worse strategy, he said. Surprisingly, population dense suburbs have significantly higher carbon footprints than less dense suburbs.

"Population dense suburbs also tend to create their own suburbs, which is bad news for the climate," explains Jones.

So if building more population-dense cities is not a viable solution for city planners, what is? The project website includes a tool that calculates carbon footprints for essentially every populated U.S. zip code, city, county and U.S. state (31,531 zip codes, 10,093 cities and towns, 3,124 counties, 276 metropolitan regions and 50 states) as well as an interactive online map allowing users to zoom in and out of different locations. Households and cities can calculate their own carbon footprints to see how they compare to their neighbors and create customized climate action plan from over 40 mitigation options.

In some locations, motor vehicles are the largest source of emissions, while in other locations it might be electricity, food, or goods and services. California, for example, has relatively low emissions associated with household electricity, but large emissions from transportation. The opposite is true in parts of the Midwest, where electricity is produced largely from coal.

Tailored emission lowering strategies

The real opportunity, say the authors, is tailoring climate solutions to demographically similar populations within locations.

"Suburbs are excellent candidates for a combination of solar photovoltaic systems, electric vehicles and energy-efficient technologies," said Kammen. "When you package low carbon technologies together you find real financial savings and big social and environmental benefits."

The authors argue that cities need to step out of traditional roles in planning urban infrastructure and learn how to better understand the needs of residents in order to craft policies and programs that enable the adoption of energy and carbon-efficient technologies and practices.

One example of this is the CoolCalifornia Challenge, a statewide carbon footprint reduction competition to name the "Coolest California City." The program, run by Jones and Kammen and sponsored by the California Air Resources Board and Energy Upgrade California, will be accepting applications for new cities in February. Each city creates their own, targeted strategies to reduce barriers and increase motivation to engage residents in climate action.

"People need to act within their own spheres of influence, where they feel they can make the most difference," Jones said. "We hope the information provided in these tools will help individuals, organization and cities understand what makes the most impact locally and to enable more tailored climate strategies.

The research was funded by the National Science Foundation and the California Air Resources Board.

Robert Sanders | EurekAlert!
Further information:

More articles from Ecology, The Environment and Conservation:

nachricht Invasive Insects Cost the World Billions Per Year
04.10.2016 | University of Adelaide

nachricht Malaysia's unique freshwater mussels in danger
27.09.2016 | The University of Nottingham Malaysia Campus

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Resolving the mystery of preeclampsia

21.10.2016 | Health and Medicine

Stanford researchers create new special-purpose computer that may someday save us billions

21.10.2016 | Information Technology

From ancient fossils to future cars

21.10.2016 | Materials Sciences

More VideoLinks >>>