That interest inspired the Kansas State University soybean breeding program to team up with the spectral analysis lab of Kevin Price, K-State professor of agronomy, to explore ways to increase the efficiency of the soybean breeding line selection process.
“The most time-consuming, land-intensive and expensive aspect of our breeding program at K-State is in harvesting the many thousands of early generation lines, weighing the seed and determining yield,” said Bill Schapaugh, K-State soybean breeder. “If we can find a way to separate out 50 percent or more of the very low-yielding lines without the need to combine harvest and weigh the seed, that would reduce the time and cost of our breeding program considerably,” Schapaugh said.
Spectral analysis, a method of analyzing the electromagnetic radiation coming from plants and other objects, is being used in the K-State Agronomy Department to determine the level of photosynthetic activity of vegetation in many different situations. The work is conducted with financial support from the Kansas Soybean Commission.
“We decided to work with Dr. Price’s spectral analysis team to try using this new technology in our soybean breeding nursery,” Schapaugh said. “The goal was to find out how effective this technology might be in predicting yields, stress tolerance and disease resistance as a way to eliminate unpromising lines early in the process.”
To do this, the K-State team, including graduate students Nan An, Brent Christenson, and Nathan Keep, used a ground-based spectroradiometer to gather spectral data in the visible and infrared spectra at various stages of growth, and correlated the results with actual yield data. They have spent the last two years trying to determine exactly what data to collect and how often, and whether any of the spectral regions being measured would have a good correlation to yield.
“Spectral analysis doesn’t have to be accurate enough to separate lines with a yield difference of just one or two bushels per acre. If it can separate lines with a yield difference of five to 10 bushels, that would be a great help in the preliminary stages of line evaluation,” Schapaugh said.
The initial model, developed by Christenson, correlated various spectral data at different growth stages with actual yields. The correlation using that model was not perfect, but was close enough to encourage further work.
“With this model, and using only the spectral data taken at the seed fill stage to make selections, we would have retained all of the highest yielding varieties by selecting the best half,” Schapaugh said.
“If we can repeat the kind of results we have achieved in the training population with experimental varieties from other populations, the precision should be accurate enough to cull out lines having a low yield potential at the earliest stage of evaluation. If we can discard low-yielding lines without having to harvest them and weigh the seed for yields, this will have tremendous value to the breeding program in terms of saving time, space and money,” he said.
The K-State team is expanding its research into this new technology, developing more robust models, using different types of sensors, adding genotypes, and evaluating the methods of measurement.
Also, this summer, the team members plan to test the use of aerial sensors in addition to the ground-based sensors. Price has been working on various aerial spectroradiometer applications in agriculture.
“Our goal is to be able to use spectral analysis to achieve a dramatic reduction in the cost of producing a unit gain in yield potential, and the results so far are promising,” Schapaugh said.
Bill Schapaugh is at 785-532-7242 or email@example.com; Steve Watson firstname.lastname@example.org; Elaine Edwards 785-532-5851 or email@example.com
Bill Schapaugh | Newswise
Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)
Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences