Materials Sciences

Rewind Project: Advancing Sustainable Battery Recycling

REWIND - technology ma-turity for direct recycling. K. Selsam, Fraunhofer ISC The use of the image is free of charge for editorial purposes for reporting on this topic. Any other use is only permitted with the prior consent of Fraunhofer ISC.
(c) Katrin Selsam / Fraunhofer ISC

Without lithium-ion batteries, environmentally friendly mobility and a sustainable energy supply would be virtually inconceivable. However, the increasing demand for batteries and the associated raw materials poses major challenges. The REWIND project aims to overcome important obstacles on the way to an efficient and ecologically sustainable circular economy. REWIND is part of the BattFutur program of the German Federal Ministry of Education and Research (BMBF).

The project goal is clearly defined: To significantly improve the recyclability of batteries in order to increase resource efficiency and reduce CO2 emissions. A central goal of REWIND is to counteract the shortage of skilled workers and to attract young scientists to battery research by establishing a junior research group at the Fraunhofer R&D Center for Electromobility (FZEB) of the Fraunhofer Institute for Silicate Research ISC. This project supports the overall goal of establishing a “Competence Center for Direct Recycling” and thus laying the foundation for future innovations.

Advanced Direct Recycling through Circular Design

The REWIND project sets new standards in battery recycling. With a circular approach “ab initio” – right from the start – the project aims to develop a lithium-ion battery (LIB) whose prototype is not only recyclable, but whose components can also be recovered almost completely and in a structure-preserving manner. After a regeneration step, the recyclates can be reused directly in cell production.

Despite the advantages of direct recycling – conservation of resources and (potentially) lower production costs due to the elimination of the high-temperature step in the synthesis of the active materials – no such process has yet been established on an industrial scale. At present, the cells are usually mechanically shredded and then further processed by hydrometallurgical methods – with the extraction of many elements, but with the loss of the functional materials. This is mainly due to the low level of technological maturity. For example, impurities from upstream mechanical processes complicate processing, and the necessary separation of cathodes and anodes is a particular technological hurdle. Due to the variety of lithium battery cell formats and the different cell chemistries, the separation of anodes and cathodes has not been economically feasible because the battery cells are not labeled. REWIND is also working on this problem and, for example, in cooperation with Prof. Dr. Karl Mandel from the Friedrich-Alexander University Erlangen-Nuremberg, wants to advance labeling by using marker particles that enable simple and reliable identification of the ingredients.

A sustainable cycle

A key objective of REWIND is to develop a LIB cell with specially designed recyclable electrodes and cell designs. This means that cathode and anode active materials, as well as conductive carbon black and cell casings, can be regenerated using partially automated, water-based and energy-efficient processes and used directly in new batteries. Compared to conventional recycling methods such as pyrometallurgical and hydrometallurgical processes, REWIND’s direct recycling offers significant advantages. This is particularly evident in the recovery of functional but less “valuable” cathode active materials such as lithium iron phosphate (LFP) and anode materials such as graphite.

Focus on LFP and transfer to alternative battery concepts

Due to the growing demand for LFP and its importance in battery technology, REWIND is focusing on this material. In addition, the concept is being transferred to sodium-ion batteries (NIB) to expand the application possibilities of the developed technologies. The material costs for NIB are lower compared to LIB. However, there are still unresolved technological challenges, such as lower energy density – so NIB automatically requires more space and weighs more for the same battery capacity.

Solid foundations and future prospects

The foundation for REWIND was laid by a series of public projects such as AutoKlass, IDcycLIB, AdRecBat, NaKlar, and ReUse, many of which were initiated and led by Fraunhofer ISC. “These projects have not only created valuable knowledge and a robust infrastructure, but have also paved the way for efficient work in the REWIND project,” says Dr. Andreas Flegler, head of the Fraunhofer R&D Center for Electromobility and initiator of REWIND.

The REWIND project offers a great opportunity to close the cycle of direct recycling, to develop a profound understanding of the overall process and to develop innovative process steps. The project will lead to the establishment of a competence center for direct recycling. This will be a platform for interested industrial companies such as equipment manufacturers, OEMs and material producers.

The REWIND project therefore represents not only technological innovation, but also a sustainable vision that has the potential to fundamentally change the battery recycling industry. With the support of academic mentors such as Prof. Dr. Karl Mandel and a variety of industry mentors, the REWIND project will develop not only scientific but also practical solutions that can be quickly implemented in the industry. This project is an important step towards a more sustainable mobile future.

The four pillars of the REWIND project:

1. Material and Component Design
The goal is to design materials and components from the ground up to be recyclable without compromising functionality.

2. Labelling/Battery Passport
The development of ID markers within the battery cells will enable quick and clear identification of materials to ensure safe processing.

3. Cell Design
Work is underway on a cell design that can be opened almost contactlessly, and the cathodes and anodes can be separated to allow direct recycling.

4. Transfer to sodium-ion batteries
The design and recycling concepts developed in the project will also be transferred to sodium-ion batteries to extend the applicability of the research results.

REWIND supporters

  • BMW AG
  • Carl Padberg Zentrifugenbau GmbH
  • EurA AG
  • Friedrich-Alexander-Universität Erlangen-Nürnberg
  • Himmelwerk Hoch- und Mittelfrequenzanlagen GmbH
  • IBU-tec advanced materials AG
  • Leclanché GmbH
  • Netzsch-Gerätebau GmbH
  • Porsche eBike Performance GmbH
  • WeSort.AI GmbH

 

REWIND facts

REWIND – Direct recycling of lithium-ion batteries: aqueous processes, ID markers, recycling-relevant new electrode and cell designs

REWIND receives funding from the Federal Ministry of Education and Research as part of the BattFutur program

Term: 1/1/2024 – 12/31/2027

Funding reference: 03XP0596

Funding amount: 1.8 million euros

 

Contact:

Dr. Andreas Flegler
Head of Department and Head of Processing/Recycling

Fraunhofer Institute for Silicate Research ISC
Neunerplatz 2
97082 Würzburg, Germany

Phone +49 931 4100-162

https://www.isc.fraunhofer.de/en/press-and-media/press-releases/project-rewind-battery-recycling-circular-design.html

Comments (0)

Write a comment

Related Posts

This spongy material and the sun’s power remove salt from seawater
Materials Sciences

Spongy Material and Sun’s Power Combine to Desalinate Seawater

The majority of Earth’s water is unfit for human consumption since it is trapped in salty oceans. Although desalination plants are capable of turning saltwater into freshwater, they usually use a lot of energy. Scientists have now created a novel, sponge-like substance that effectively turns saltwater into drinkable water when combined with sunlight and a basic plastic cover. Their research, which was published in ACS Energy Letters, shows that an outdoor proof-of-concept that used just natural sunlight to successfully produce…

Dr. Miloslav Polášek, head of the Coordination Chemistry research group at IOCB Prague, and Kelsea Grace Jones, PhD student in Dr. Miloslav Polášek's group
Materials Sciences

Rare-Earth Recycling Boosts Raw Material Independence

The scientific team led by Dr. Miloslav Polášek at IOCB Prague has come up with a technique to separate and purify rare earth elements (lanthanides). These are critical to industries ranging from electronics and medicine to automotive and defense. This novel method enables the extraction of metals like neodymium and dysprosium from used neodymium magnets. It is an important component in electric vehicles and wind turbines. Eco-Friendly and Solvent-Free Process Unlike conventional methods that rely on harsh chemicals and generate…

Spacer insertion unlocks efficiency in low-voltage exciplex OLEDs, finds study
Materials Sciences

Spacers: Key to Advancing Portable Low-Voltage OLEDs

Inserting a nanometer-thin spacer in ExUC-OLEDs improves energy transfer, enhances blue light emission 77-fold, paving way for lightweight, low-voltage, and more flexible OLEDs Organic light-emitting diodes (OLEDs) have transformed display and lighting technology with their vivid colors, deep contrast, and energy efficiency. As demand grows for lighter, thinner, and more energy-saving devices—especially in wearables, foldables, and portable electronics—there’s increasing interest in OLEDs that can operate at lower voltages without compromising performance. A new type of OLEDs, known as exciplex upconversion…

Mask users can now breathe easy on two counts
Materials Sciences

Breathe Easy: New Masks Enhance Comfort and Safety

Tokyo, Japan—The COVID-19 pandemic increased public awareness of the importance of mask use for personal protection. However, when the mesh size of mask fabrics is small enough to capture viruses, which are usually around one hundred nanometers in size, the fabric typically also restricts air flow, resulting in user discomfort. But now, researchers from Japan have found a way to avoid this. In a study published this month in Materials Advances, researchers from the Institute of Industrial Science, The University…

Feedback