Chillventa 2018: Fraunhofer ISE Puts Focus on Heat Pumps
“In addition to process optimization, the sustainable supply of heating and cooling in multi-family homes as well as in businesses and industry is important for the success of the energy transformation. Looking forward, further research and development work on heat pumps is necessary in order to meet the market requirements of these branches in the future. We invite participants of the Chillventa to the specialist forums, where they have the possibility to speak with experts in the field,” explains Dr. Peter Schossig, Director of Business Division “Thermal Systems and Building Technology” at Fraunhofer ISE.
The following topics will be presented at specialist forum on heat pump technology located in Hall 4A, Stand 4A-405 at the Chillventa:
Tuesday, October 16
11:40 – 12:00 “Reduction of energy costs and integration of renewables by using vacuum ice slurry in heat pump and cooling systems,” Mathias Safarik – ILK Dresden gGmbH Institut für Luft- und Kältetechnik gemeinnützige Gesellschaft mbH
14:40 – 15:00 “Neue Komponenten für natürliche Kältemittel: Welche werden notwendig werden?“, Dr.-Ing. Peter Schossig – Fraunhofer Institute for Solare Energy Systems ISE
Wednesday, October 17
11:40 – 12:00 “Sollten die Hersteller die Verantwortung für die Effizienz des Gesamtsystems übernehmen? Wenn ja, wie am besten?”, Egbert Tippelt – Viessmann Deutschland GmbH
14:40 – 15:00 „Die Zukunft der WP Vermessung/Zertifizierung. Brauchen wir dynamische Bewertungs-Methoden?“, Carsten Palkowski – BAM Bundesanstalt für Materialforschung und -prüfung // Andreas Zottl – AIT Austrian Institute of Technology
Thursday, October 18
11:40 – 12:00 „Fehlerfreie Installation: Was macht ein Hersteller um den Installateuren zu helfen die Fehler zu vermeiden?“, Tony Krönert – Bundesverband Wärmepumpe e.V.
14:40 – 15:00 „Integration der Wärmepumpen in das Energiesystem der Zukunft. Was ist notwendig um diesen Prozess zu beschleunigen?“, Dr. Marek Miara – Fraunhofer Institute for Solar Energy Systems ISE
On October 15, 2018, the day before the trade fair, the Chillventa CONGRESS offers four specialist forums which provide a detailed summary on current topics in the branch. In the forum “Conditioning Computer Centers” Gerrit Fülder from Fraunhofer ISE gives a talk on “Adsorption Cooling from Exhaust Heat of Liquid Cooled CPUs in the HPC Computer Center – Material and Component Development.” The growth rate of big computers installed has risen rapidly over the last years and will continue to do so in the future. Besides the electricity needed to operate the components, heat is emitted on about the same dimension. Therefore, efficient solutions for cooling computer rooms come into focus.
Innovations in Heat Pumps
Fraunhofer ISE has many years of experience in heat pump technology. Its know-how covers the entire value chain, starting with material and component development together with partners and clients from industry and research, through field tests and indoor tests up to analyzing the performance as part of the total energy system.” A current research focus is the use of climate-friendly refrigerants in heat pumps. These will be replacing conventional refrigerants due to the new regulatory restrictions in place. At the Chillventa we will be presenting several new approaches and options,” says Dr. Marek Miara, Coordinator of Heat Pumps at Fraunhofer ISE.
You can visit us at the Fraunhofer ISE stand (4A-407) to speak with experts and view our exhibits:
Efficient refrigerant distributor for microchannel evaporator
Heat exchangers like the evaporator play a key role in decreasing the refrigerant charge in air-water heat pumps. This is also relevant for the costs and safety. Fraunhofer ISE has optimized concepts to reduce inner volumes. Aluminum sheets with channels allow for a homogeneous distribution of the refrigerant (e.g. propane) compared to a ribbed circular tube heat exchanger.
Adsorption Heat Exchanger
As a main component of the adsorption chiller and heat pump, the heat exchanger has a patented adsorptive coating. Metal-organic frameworks (MOFs) can be used as sorbent, for example. The coating allows for a high power density and high heat transformation efficiency at the same time.
Photovoltaic-Thermal Hybrid Collector (PVT) and Heat Pump
The symbiosis of both technologies has many advantages: The PVT collector supplies low temperature heat to the evaporator and also electricity for the compressor. This can replace a ground probe or an outdoor unit, eliminating noise. Solar cells are laminated directly on the absorber in order to optimize the heat transfer from the cells to the fluid. The initiative integraTE² from Fraunhofer ISE and partners, within the framework eneff.gebäude.2050, aims to establish the technical integration of thermal-electric energy supply combining PVT and heat pumps on the market.
Wire-based Heat Exchanger
The innovative design with a soldered copper-wire structure is optimized for use in adsorption heat pumps and improves the sub-atmospheric evaporation of water. The manufacturing technology for metal textile structures enlarges the surface area and thus the capacity for the capillary adsorption of the refrigerant. Compared to the current state of the art, this heat exchanger evidences improved volumetric evaporation.
All news from this category: Power and Electrical Engineering
This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.
innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.
Researchers confront optics and data-transfer challenges with 3D-printed lens
Researchers have developed new 3D-printed microlenses with adjustable refractive indices – a property that gives them highly specialized light-focusing abilities. This advancement is poised to improve imaging, computing and communications…
Research leads to better modeling of hypersonic flow
Hypersonic flight is conventionally referred to as the ability to fly at speeds significantly faster than the speed of sound and presents an extraordinary set of technical challenges. As an…
Researchers create ingredients to produce food by 3D printing
Food engineers in Brazil and France developed gels based on modified starch for use as “ink” to make foods and novel materials by additive manufacturing. It is already possible to…