Plants instead of petroleum

Coated paper with a barrier effect for the production of cosmetic tubes. In addition to the Fraunhofer ISC, the project partners Polymaris, IPC and Albea were in-volved in this project.
(c) K. Selsam / Fraunhofer ISC/INN PRESSME

– making new bio-based material solutions tangible on a pilot scale.

The INN PRESSME joint project, funded by the European Union with around 14 million euros, was launched three years ago. The aim of the 27 project partners from nine European countries is to establish a Europe-wide ecosystem for the development and production of plant-based, recyclable, and/or biodegradable packaging, energy, and transportation solutions, as well as consumer goods. The planned nine test cases with prototypes have currently been completed, and the results are very encouraging.

The European Green Deal has set out a roadmap and an ambitious package of measures to create a sustainable and green European economy with zero net emissions by 2050. The European Union also supports the realization of a cleaner and competitive Europe in cooperation with economic actors, consumers, citizens, and civil society organ-izations through its HORIZON research program, in which INN PRESSME is funded. INN PRESSME offers a two-pronged approach to help European companies achieve ambi-tious climate targets.

On the one hand, plant-based raw materials are to be developed for new marketable products and goods that are also recyclable. Thanks to nanotechnology, these materials should achieve and even surpass the performance of current fossil-based materials.

Secondly, digitalization is to be supported by providing companies with all the data and tools for modeling the life cycle value chain that are compatible with the conversion of industrial production – from raw material conversion to material processing. This is the key to maximizing the use of raw materials in the circular economy, which is also ac-companied by extensive LCA, LCCA, and LCI studies.

The total of nine test cases for pilot production in very different sectors have been com-pleted as planned after three years of the project. The production of demonstrators from bio-based materials for environmentally friendly packaging, energy, transportation, and consumer goods was successfully demonstrated on a pilot scale. For this purpose, exist-ing pilot plants were expanded with project funds and adapted to the new requirements.

In the INN PRESSME project, the Fraunhofer Institute for Silicate Research ISC took on the challenging task of preparing the products made from plant-based raw materials with special bio-based functional coatings for their respective requirements in use. The Fraunhofer ISC was involved in a total of six test cases. The institute modified the bioORMOCER® materials, which were designed as barrier layers for the packaging sec-tor. In addition to barrier layers for paper-based packaging, scratch-resistant and optical layers for automotive applications were produced by using these special ORMOCER® materials. Antimicrobial and easy-to-clean coatings for sports products and shoe soles were also developed.

From Laboratory to Pilot Scale – A Rocky Road

What works in the laboratory does not necessarily achieve the same result on a produc-tion scale. Scaling up the quantities of material produced therefore takes place in de-fined steps to make the necessary adjustments to the material formulation and manu-facturing process. At the Fraunhofer ISC, this upscaling was carried out up to pilot scale. For example, a 100-liter reactor for lacquer synthesis and a roll-to-roll system were used to apply the barrier layers to a nanolayer-modified paper. Due to the low layer thick-nesses required, 100 liters is sufficient for up to 3,000 square meters of coated surface. A particular challenge in the development of the coating formulation was to match the coatings to the quality and requirements of the respective bio-based substrates. The properties had to be adapted very individually, as bio-based materials, in particular, have complex surfaces and are not very temperature-stable or resistant to chemicals. The processing of bio-based materials in roll-to-roll processes is also often challenging, and the expected cycle rates are often only achieved with further adaptation.

However, despite all the technical challenges, the successfully completed test cases proved that the establishment of a Europe-wide pilot plant network in various institutions has been successful, and that cooperation in the various work steps works smoothly.

Well-Established Infrastructure for Companies

In future, this pilot plant network will be available to companies via a Single Entry Point (SEP). This will provide them with effective support in upscaling their own bio-based solutions with an excellently developed infrastructure, without having to invest in their own plants. INN PRESSME thus significantly reduces the entrepreneurial risks until new plant-based products are ready for the market. The final year of the project will now be used to set up the SEP and carry out comprehensive life cycle analyses and end-of-life assessments with regard to biodegradability and recyclability.

Wissenschaftliche Ansprechpartner:

Dr. Ferdinand Somorowsky, Fraunhofer ISC
Contact: ferdinand.somorowsky@isc.fraunhofer.de

Weitere Informationen:

https://www.inn-pressme.eu/ Link to the project website
https://www.linkedin.com/company/inn-pressme/ Follow the projekt on LinkedIn
https://www.instagram.com/inn_pressme/ Follow the project on Instagram
https://cordis.europa.eu/project/id/952972 About INN PRESSME on Cordis

Media Contact

Dipl.-Geophys. Marie-Luise Righi PR und Kommunikation
Fraunhofer-Institut für Silicatforschung ISC

All latest news from the category: Materials Sciences

Materials management deals with the research, development, manufacturing and processing of raw and industrial materials. Key aspects here are biological and medical issues, which play an increasingly important role in this field.

innovations-report offers in-depth articles related to the development and application of materials and the structure and properties of new materials.

Back to home

Comments (0)

Write a comment

Newest articles

Energy-Efficient Building Design in Real-Time Simulation

An interdisciplinary team at TU Graz is revolutionising the design of sustainable buildings. The advantages and disadvantages of different construction measures are visualised in real time using VR simulation. Next-generation…

Hidden partners: Symbiodolus bacteria found in various insect orders

The endosymbiont Symbiodolus clandestinus, living inside insect cells, has remained undiscovered until now. Scientists at the Max Planck Institute for Chemical Ecology report its discovery in at least six insect…

Material characterization of metal oxides and organic materials

Developers of thin-film gas sensors benefit from heated substrate platform. The Fraunhofer Institute for Photonic Microsystems IPMS develops and manufactures individual heatable test chips for the characterization of new gas…

Partners & Sponsors