UTokyo researchers aim for spintronic applications thanks to great leap forward
Electric currents drive all our electronic devices. The emerging field of spintronics looks to replace electric currents with what are known as spin currents. Researchers from the University of Tokyo have made a breakthrough in this area.
Their discovery of the magnetic spin Hall effect could lead to low-power, high-speed and high-capacity devices. They have created sample devices which can further research into potential applications.
"Electricity lit up the world and electronics connected it," says Professor Yoshichika Otani from the Institute for Solid State Physics. "Spintronics will be the next step forward in this procession and we can only imagine what advances it may bring."
So what is spintronics and why should we be excited?
"In essence spintronics is used to transfer information, something we have always used electric currents for," continues Otani, "but spintronics offers a whole range of advantages, some of which we're just starting to understand."
Currently, power efficiency of electrical and electronic devices is a limiting factor in technological development. The problem lies in the nature of electric currents, the flow of charge in the form of electrons. As electrons traverse a circuit they lose some energy as waste heat. Spintronics improves upon the situation - instead of movement it exploits another property of electrons to transfer information, their angular momentum or "spin".
"In spin currents electrons still move but far less than in a charge current," explains Otani. "It's the movement of electrons that typically leads to resistance and waste heat. As we reduce the need for so much electron movement we improve efficiency dramatically."
To demonstrate this phenomenon researchers created a new kind of material called a 'non-collinear antiferromagnet' - Mn3Sn which is a special kind of magnet. In everyday magnets - or ferromagnets - such as you might find on fridge doors, the spins of the electrons within align in parallel which imbues the material with its magnetic effect. In this antiferromagnet the spins of the electrons line up in triangular arrangements such that no one direction is prevalent and the magnetic effect is effectively suppressed.
When a small electric current is fed into Mn3Sn and a magnetic field is applied to it in just the right way, the electrons order themselves according to their spin and electrical current flows. This is the magnetic spin Hall effect, and the process can be reversed with the magnetic inverse spin Hall effect to get an electric current from a spin current.
In Mn3Sn alike spins tend to accumulate on the surface of the material, so it's cut into thin layers to maximize its surface area and thus the capacity of spin current a sample carries. The researchers have already embedded this material into a functional device to serve as a test bed for possible applications and are excited by the prospects.
"Power efficiency in electrical systems is enough to pique the interest of some, but the use of antiferromagnets to generate spin currents could improve other aspects of technology too," says Otani. "Antiferromagnets more easily miniaturized, operate at higher frequencies and pack more densely than ferromagnets."
But how do these ideas translate into applications?
"Miniaturization means spintronic devices could be made into microchips," continues Otani. "High frequencies mean spintronic chips could outperform electronic ones in operation speed, and higher density leads to greater memory capacity. Also low dissipation in spin currents at room temperatures improves power efficiency further still."
Devices based on the traditional spin Hall effect already exist in spintronics research but the magnetic spin Hall effect and novel materials used could vastly improve all kinds of technology.
"There is still much work to do including exploration of the underlying principles behind the phenomenon we investigate," concludes Otani. "Driven by mysteries of exotic materials, I'm thrilled to be part of this technological revolution."
Motoi Kimata, Hua Chen, Kouta Kondou, Satoshi Sugimoto, Prasanta K. Muduli, Muhammad Ikhlas, Yasutomo Omori, Takahiro Tomita, Allan. H. MacDonald, Satoru Nakatsuji, Yoshichika Otani. Magnetic and inverse spin Hall effects in a noncollinear antiferromagnet. Nature.
This work is partially supported by CREST (No. JPMJCR15Q5), Japan Science and Technology Agency, and Grants-in-Aid for Scientific Research (No. 16H02209, 25707030), and by Grants-in-Aids for Scientific Research on Innovative Areas (15H05882, 15H05883, 26103002) and Program for Advancing Strategic International Networks to Accelerate the Circulation of Talented Researchers (Grant No. R2604) from the Japanese Society for the Promotion of Science. H.C. and A.H.M. were supported by SHINES, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Basic Energy Sciences under Award #SC0012670.
The Institute for Solid State Physics
Professor Yoshichika Otani
The Institute for Solid State Physics, The University of Tokyo
5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8581, JAPAN
Mr. Rohan Mehra
Division for Strategic Public Relations, The University of Tokyo
7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8654, JAPAN
About the University of Tokyo
The University of Tokyo is Japan's leading university and one of the world's top research universities. The vast research output of some 6,000 researchers is published in the world's top journals across the arts and sciences. Our vibrant student body of around 15,000 undergraduate and 15,000 graduate students includes over 2,000 international students. Find out more at https:/
Rohan Mehra | EurekAlert!
Convenient location of a near-threshold proton-emitting resonance in 11B
29.05.2020 | The Henryk Niewodniczanski Institute of Nuclear Physics Polish Academy of Sciences
A special elemental magic
28.05.2020 | Kyoto University
In living cells, enzymes drive biochemical metabolic processes enabling reactions to take place efficiently. It is this very ability which allows them to be used as catalysts in biotechnology, for example to create chemical products such as pharmaceutics. Researchers now identified an enzyme that, when illuminated with blue light, becomes catalytically active and initiates a reaction that was previously unknown in enzymatics. The study was published in "Nature Communications".
Enzymes: they are the central drivers for biochemical metabolic processes in every living cell, enabling reactions to take place efficiently. It is this very...
Early detection of tumors is extremely important in treating cancer. A new technique developed by researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from normal tissue. The work is published May 25 in the journal Nature Nanotechnology.
researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from...
Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.
When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...
Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.
Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...
Scientists took a leukocyte as the blueprint and developed a microrobot that has the size, shape and moving capabilities of a white blood cell. Simulating a blood vessel in a laboratory setting, they succeeded in magnetically navigating the ball-shaped microroller through this dynamic and dense environment. The drug-delivery vehicle withstood the simulated blood flow, pushing the developments in targeted drug delivery a step further: inside the body, there is no better access route to all tissues and organs than the circulatory system. A robot that could actually travel through this finely woven web would revolutionize the minimally-invasive treatment of illnesses.
A team of scientists from the Max Planck Institute for Intelligent Systems (MPI-IS) in Stuttgart invented a tiny microrobot that resembles a white blood cell...
19.05.2020 | Event News
07.04.2020 | Event News
06.04.2020 | Event News
29.05.2020 | Life Sciences
29.05.2020 | Physics and Astronomy
29.05.2020 | Life Sciences