CO2 concentrations in the air continue to rise rapidly, and a rapid reduction in man-made emissions is becoming increasingly important. In order to assess the effectiveness of political measures, timely and reliable emission levels are needed. However, current methods are costly. The European Space Agency ESA is therefore working on the development of new satellites which will be able to determine CO2 emissions in the future - with the help of Empa.
Cities are veritable CO2 spinners, but how much emission is actually emitted can hardly be reliably determined at present. Current estimates are based on statistics and activity data from transport, industry, heating and energy production.
The evaluation of these data is complex and the results are only available with a long delay. Estimates are also uncertain, as precise figures are often not available and simplified assumptions must be made - for example, in the case of heating.
Although the current network of ground stations is useful for tracking the increase in CO2 in the atmosphere, it is not currently dense enough to provide reliable information on the emissions of individual countries or even individual cities.
Researchers working on improved emission determination
For this reason, the EU, together with ESA, is developing a system for monitoring CO2 emissions. A key component of this is the CO2M satellite mission ("Copernicus Anthropogenic Carbon Dioxide Monitoring"): From 2025, the first CO2M satellites are to be sent into orbit to produce global maps of atmospheric CO2 concentrations using spectroscopic measurements.
This will make it possible to determine where and how much CO2 is emitted by industrial plants, cities and countries. These measurements would reduce the current uncertainties in estimating CO2 emissions from the combustion of fossil fuels.
ESA relies on Empa's expertise to equip the satellites with the appropriate measurement technology. "We were able to give ESA various recommendations for equipping the satellites," says Gerrit Kuhlmann of Empa's Air Pollution / Environmental Technology department.
The difficulty in determining CO2 emissions is to distinguish between anthropogenic and biological signals. The respiration of vegetation causes strong fluctuations in the distribution of CO2. The satellite must therefore be able to separate these from man-made emissions. The idea: a combined measuring device that detects CO2, but also additionally nitrogen dioxide (NO2).
Because: "The combustion of coal, oil and gas produces not only CO2 but also nitrogen oxides. However, these are not produced during the natural 'breathing' of the biosphere," says Kuhlmann. An additional NO2 instrument should therefore be able to "filter out" anthropogenic CO2 signals.
Empa simulates satellite measurements
In order to test this idea, Kuhlmann and his team simulated the distribution of CO2 and NO2 concentrations for the year 2015 with a spatial resolution not achieved before. The elaborate simulations were carried out on the fastest high-performance computer in Europe, the "Piz Daint" at the Swiss computer centre CSCS in Lugano.
They were able to show that a combination of CO2 and NO2 measurements provides better and more reliable results than if only one CO2 measuring device had been installed on the satellite.
At the moment it is still unclear how many satellites need to be sent into orbit, but Kuhlmann recommends at least three.
"The problem is that the sky is rarely cloudless," says Kuhlmann. In 2015, the sky over Europe was accordingly free of clouds on average on only one day a week. The more satellites regularly take pictures, the greater the probability of seeing the plumes of exhaust fumes from individual sources such as cities and being able to determine emissions from them.
The recommendation for the installation of an additional NO2 measuring instrument has already been incorporated into the planning of the new satellites.
Dr. Gerrit Kuhlmann
Air Pollution / Environmental Technology
Phone +41 58 765 47 53
G Kuhlmann, G Broquet, J Marshall, V Clément, A Löscher, Y Meijer, D Brunner, Detectability of CO2 emission plumes of cities and power plants with the Copernicus Anthropogenic CO2 Monitoring (CO2M) mission, Atmos. Meas. Tech. 2019, doi: 10.5194/amt-12-6695-2019
Empa Redaktion | Empa - Eidgenössische Materialprüfungs- und Forschungsanstalt
Innovative grilling technique improves air quality
01.07.2020 | Fraunhofer Institute for Building Physics IBP
Traffic density, wind and air stratification influence the load of the air pollutant nitrogen dioxide
26.06.2020 | Leibniz-Institut für Troposphärenforschung e. V.
Solar cells based on perovskite compounds could soon make electricity generation from sunlight even more efficient and cheaper. The laboratory efficiency of these perovskite solar cells already exceeds that of the well-known silicon solar cells. An international team led by Stefan Weber from the Max Planck Institute for Polymer Research (MPI-P) in Mainz has found microscopic structures in perovskite crystals that can guide the charge transport in the solar cell. Clever alignment of these "electron highways" could make perovskite solar cells even more powerful.
Solar cells convert sunlight into electricity. During this process, the electrons of the material inside the cell absorb the energy of the light....
Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range – and they are unrivalled in terms of weight.
Electric motors and electronic devices generate electromagnetic fields that sometimes have to be shielded in order not to affect neighboring electronic...
A promising operating mode for the plasma of a future power plant has been developed at the ASDEX Upgrade fusion device at Max Planck Institute for Plasma...
Live event – July 1, 2020 - 11:00 to 11:45 (CET)
"Automation in Aerospace Industry @ Fraunhofer IFAM"
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM l Stade is presenting its forward-looking R&D portfolio for the first time at...
With an X-ray experiment at the European Synchrotron ESRF in Grenoble (France), Empa researchers were able to demonstrate how well their real-time acoustic monitoring of laser weld seams works. With almost 90 percent reliability, they detected the formation of unwanted pores that impair the quality of weld seams. Thanks to a special evaluation method based on artificial intelligence (AI), the detection process is completed in just 70 milliseconds.
Laser welding is a process suitable for joining metals and thermoplastics. It has become particularly well established in highly automated production, for...
02.07.2020 | Event News
19.05.2020 | Event News
07.04.2020 | Event News
03.07.2020 | Life Sciences
03.07.2020 | Studies and Analyses
03.07.2020 | Power and Electrical Engineering