Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Batteries for electric cars: Fact check and answers to the most important questions about electric mobility


How well do electric cars perform environmentally? How will their range, economic efficiency and charging infrastructure develop in the long term? Will electric mobility mean job losses? These and many other questions to do with the battery value chain are addressed by the Fraunhofer ISI in a Policy Brief, which was presented at the Battery Forum Germany in Berlin. Main message: there is nothing to stop the widespread market diffusion of electric cars between 2020 and 2030+, although numerous challenges still have to be addressed.

The technological maturity of batteries for electric cars and whether these make economic and environmental sense is still being questioned by critics today, even though electric mobility has already been evolving for a long time.

The start of 2020 marked more than 7.5 million e-cars on roads worldwide, and their share in global car sales is estimated as ranging between 25 and 75% from 2030 depending on the market study.

This has a major impact on the global demand for lithium-ion batteries (LIB) and their capacities, which are expected to increase from 500 - 1,500 GWh (around 2025) up to 1,000 - 6,000 GWh (from 2030).

Battery cells made in Europe

Battery cell production capacities of almost 600 GWh have been announced in Europe by 2030 – half of which is to be located in Germany. This is equivalent to a 20% share of global battery cell demand on average, and is intended to meet the expected demand of European automobile manufacturers.

Given the decisive market ramp-up phase that is expected between 2020 and 2030, Fraunhofer ISI‘s fact check provides an overview of challenges that are the subject of controversial discussion along the battery value chain and outlines the existing needs for action in this period. The authors conducted a meta-analysis of a wide range of literature including their own studies to answer 12 key questions such as:

How are batteries developing and what ranges can we expect?

Over the last ten years, the energy density of large LIB battery cells used in e-cars has almost doubled and could double again by 2030. However, in order to reach real driving ranges of more than 600 kilometers, space and weight-reducing innovations and strategies are needed in the vehicles down to the battery system level in addition to further advances in LIB batteries.

The acceptance and demand of e-car buyers will continue to improve over the next decade as the range, economic efficiency and charging infrastructure for electric cars also improve.

Do electric cars have a better environmental footprint than conventional cars?

The latest electric cars on the market score much better on environmental performance across their entire service life than conventional passenger cars. The environmental performance of e-cars improves even further if more renewable energy sources are used to produce the batteries and the power used for charging and driving in the future.

Like all passenger cars, however, e-cars also have negative environmental impacts, which must be reduced, for example, by changing our mobility behavior.

Does electric mobility lead to job losses?

Overall, many studies indicate there will be a loss of jobs in the automobile industry and its suppliers. Although the job effects from battery cell production are limited, the job effects resulting from the upstream and downstream value chains are still relevant – and therefore establishing cell producers in Europe (and Germany) is extremely important.

The job losses in the automobile industry and its suppliers are offset by job gains in other areas such as electricity production and distribution or the construction of charging infrastructure. Regions and businesses particularly affected by structural change may need to be supported by proactive industrial and employment policy measures, so that – together with natural age-related fluctuation – structural change can be shaped in a socially acceptable way.

Additional facts about batteries can be found in the Policy Brief "Batteries for electric cars: fact check and need for action".

Wissenschaftliche Ansprechpartner:

Dr. Axel Thielmann
Deputy Head of the Competence Center Emerging Technologies, Coordinator of Business Unit Industrial Technologies
Fraunhofer ISI
Phone +49 721 6809-299


Batteries for electric cars: Fact check and need for action;

Anne-Catherine Jung | Fraunhofer-Institut für System- und Innovationsforschung (ISI)
Further information:

More articles from Power and Electrical Engineering:

nachricht Mobile measuring instruments: Caught in flight
07.07.2020 | Empa - Eidgenössische Materialprüfungs- und Forschungsanstalt

nachricht PCB-embedded GaN-on-Si half bridge circuits for modular use
06.07.2020 | Fraunhofer-Institut für Angewandte Festkörperphysik IAF

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Excitation of robust materials

Kiel physics team observed extremely fast electronic changes in real time in a special material class

In physics, they are currently the subject of intensive research; in electronics, they could enable completely new functions. So-called topological materials...

Im Focus: Electrons in the fast lane

Solar cells based on perovskite compounds could soon make electricity generation from sunlight even more efficient and cheaper. The laboratory efficiency of these perovskite solar cells already exceeds that of the well-known silicon solar cells. An international team led by Stefan Weber from the Max Planck Institute for Polymer Research (MPI-P) in Mainz has found microscopic structures in perovskite crystals that can guide the charge transport in the solar cell. Clever alignment of these "electron highways" could make perovskite solar cells even more powerful.

Solar cells convert sunlight into electricity. During this process, the electrons of the material inside the cell absorb the energy of the light....

Im Focus: The lightest electromagnetic shielding material in the world

Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range – and they are unrivalled in terms of weight.

Electric motors and electronic devices generate electromagnetic fields that sometimes have to be shielded in order not to affect neighboring electronic...

Im Focus: Gentle wall contact – the right scenario for a fusion power plant

Quasi-continuous power exhaust developed as a wall-friendly method on ASDEX Upgrade

A promising operating mode for the plasma of a future power plant has been developed at the ASDEX Upgrade fusion device at Max Planck Institute for Plasma...

Im Focus: ILA Goes Digital – Automation & Production Technology for Adaptable Aircraft Production

Live event – July 1, 2020 - 11:00 to 11:45 (CET)
"Automation in Aerospace Industry @ Fraunhofer IFAM"

The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM l Stade is presenting its forward-looking R&D portfolio for the first time at...

All Focus news of the innovation-report >>>



Industry & Economy
Event News

Contact Tracing Apps against COVID-19: German National Academy Leopoldina hosts international virtual panel discussion

07.07.2020 | Event News

International conference QuApps shows status quo of quantum technology

02.07.2020 | Event News

Dresden Nexus Conference 2020: Same Time, Virtual Format, Registration Opened

19.05.2020 | Event News

Latest News

Shock-dissipating fractal cubes could forge high-tech armor

08.07.2020 | Materials Sciences

Scientists use nanoparticle-delivered gene therapy to inhibit blinding eye disease in rodents

08.07.2020 | Health and Medicine

'Growing' active sites on quantum dots for robust H2 photogeneration

08.07.2020 | Physics and Astronomy

Science & Research
Overview of more VideoLinks >>>