Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Nanostructured rubber-like material with optimal properties could replace human tissue

16.03.2020

Researchers from Chalmers University of Technology, Sweden, have created a new, rubber-like material with a unique set of properties, which could act as a replacement for human tissue in medical procedures. The material has the potential to make a big difference to many people's lives. The research was recently published in the highly regarded scientific journal ACS Nano.

In the development of medical technology products, there is a great demand for new naturalistic materials suitable for integration with the body.


Researchers at Chalmers have developed a new synthetic rubber-like material with a unique combination of properties. The material could be suitable for applications in various medical devices for supporting or replacing human tissue. The 3D printed 'nose' in the image is an example of how the material could act as a possible replacement for cartilage.

Credit: Anna Lena Lundqvist/Chalmers

Introducing materials into the body comes with many risks, such as serious infections, among other things. Many of the substances used today, such as Botox, are very toxic. There is a need for new, more adaptable materials.

In the new study, the Chalmers researchers developed a material consisting solely of components that have already been shown to work well in the body.

The foundation of the material is the same as plexiglass, a material which is common in medical technology applications. Through redesigning its makeup, and through a process called nanostructuring, they gave the newly patented material a unique combination of properties. The researchers' initial intention was to produce a hard bone-like material, but they were met with surprising results.

"We were really surprised that the material turned to be very soft, flexible and extremely elastic. It would not work as a bone replacement material, we concluded. But the new and unexpected properties made our discovery just as exciting," says Anand Kumar Rajasekharan, PhD in Materials Science and one of the researchers behind the study.

The results showed that the new rubber-like material may be appropriate for many applications which require an uncommon combination of properties - high elasticity, easy processability, and suitability for medical uses.

"The first application we are looking at now is urinary catheters. The material can be constructed in such a way that prevents bacteria from growing on the surface, meaning it is very well suited for medical uses," says Martin Andersson, research leader for the study and Professor of Chemistry at Chalmers.

The structure of the new nano-rubber material allows its surface to be treated so that it becomes antibacterial, in a natural, non-toxic way. This is achieved by sticking antimicrobial peptides - small proteins which are part of our innate immune system - onto its surface. This can help reduce the need for antibiotics, an important contribution to the fight against growing antibiotic resistance.

Because the new material can be injected and inserted via keyhole surgery, it can also help reduce the need for drastic surgery and operations to rebuild parts of the body. The material can be injected via a standard cannula as a viscous fluid, so that it forms its own elastic structures within the body. Or, the material can also be 3D printed into specific structures as required.

"There are many diseases where the cartilage breaks down and friction results between bones, causing great pain for the affected person. This material could potentially act as a replacement in those cases," Martin Andersson continues.

A further advantage of the material is that it contains three-dimensionally ordered nanopores. This means it can be loaded with medicine, for various therapeutic purposes such as improving healing and reducing inflammation.

This allows for localised treatment, avoiding, for example, having to treat the entire body with drugs, something that could help reduce problems associated with side effects. Since it is non-toxic, it also works well as a filler - the researchers see plastic surgery therefore as another very interesting potential area of application for the new material.

"I am now working full time with our newly founded company, Amferia, to get the research out to industry. I have been pleased to see a lot of real interest in our material. It's promising in terms of achieving our goal, which is to provide real societal benefit," Anand concludes.

Read the study, "Tough Ordered Mesoporous Elastomeric Biomaterials Formed at Ambient Conditions" in the scientific journal ACS Nano.

The path of the research to societal benefit and commercialisation, through start-up company Amferia and Chalmers Ventures

In order for the discovery of the new material to be useful and commercialised, the researchers patented their innovation before the study was published. The patent is owned by start-up company Amferia, which was founded by Martin Andersson and Anand Kumar Rajasekharan, two of the researchers behind the study, as well as researcher Saba Atefyekta who recently completed a PhD in Materials Science at Chalmers. Anand is now CEO of Amferia and will drive the application of the new material and development of the company.

Amferia has previously been noted for an antibacterial wound patch developed by the same team. Amferia now has the innovation of both the new nano-rubber and the antibacterial wound patch. The development of the company and the innovations' path to making profit are now being carried out in collaboration with Chalmers Ventures, a subsidiary of Chalmers University of Technology.

###

More about the research: interdisciplinary collaboration at Chalmers

Several of Chalmers' departments and disciplines were involved in the study. In addition to researchers at the Department of Chemistry and Chemical Engineering, Marianne Liebi, Assistant Professor at the Department of Physics, was a co-author of the article. She has developed a technology to make it possible to investigate the order of materials by means of x-ray irradiation, to see how the nanostructures relate to each other in the material. In the ongoing work, an industrially feasible process for production of the material will be developed. This will be done in collaboration with the Department of Industry and Materials Science.

For more information, contact:

Martin Andersson, Professor in Chemistry
+46317722966
martin.andersson@chalmers.se

Anand Kumar Rajasekharan, PhD in Materials Science and CEO of Amferia
+46 (0)762 981238
anandk@amferia.com

Media Contact

Joshua Worth
joshua.worth@chalmers.se
46-317-726-379

 @chalmersuniv

http://www.chalmers.se/en/ 

Joshua Worth | EurekAlert!
Further information:
https://www.chalmers.se/en/news/Pages/default.aspx
http://dx.doi.org/10.1021/acsnano.9b01924

More articles from Materials Sciences:

nachricht Smart textiles made possible by flexible transmission lines
02.06.2020 | Ecole Polytechnique Fédérale de Lausanne

nachricht A remote control for neurons
02.06.2020 | College of Engineering, Carnegie Mellon University

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New measurement exacerbates old problem

Two prominent X-ray emission lines of highly charged iron have puzzled astrophysicists for decades: their measured and calculated brightness ratios always disagree. This hinders good determinations of plasma temperatures and densities. New, careful high-precision measurements, together with top-level calculations now exclude all hitherto proposed explanations for this discrepancy, and thus deepen the problem.

Hot astrophysical plasmas fill the intergalactic space, and brightly shine in stellar coronae, active galactic nuclei, and supernova remnants. They contain...

Im Focus: Biotechnology: Triggered by light, a novel way to switch on an enzyme

In living cells, enzymes drive biochemical metabolic processes enabling reactions to take place efficiently. It is this very ability which allows them to be used as catalysts in biotechnology, for example to create chemical products such as pharmaceutics. Researchers now identified an enzyme that, when illuminated with blue light, becomes catalytically active and initiates a reaction that was previously unknown in enzymatics. The study was published in "Nature Communications".

Enzymes: they are the central drivers for biochemical metabolic processes in every living cell, enabling reactions to take place efficiently. It is this very...

Im Focus: New double-contrast technique picks up small tumors on MRI

Early detection of tumors is extremely important in treating cancer. A new technique developed by researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from normal tissue. The work is published May 25 in the journal Nature Nanotechnology.

researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from...

Im Focus: I-call - When microimplants communicate with each other / Innovation driver digitization - "Smart Health“

Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.

When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...

Im Focus: When predictions of theoretical chemists become reality

Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.

Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Dresden Nexus Conference 2020: Same Time, Virtual Format, Registration Opened

19.05.2020 | Event News

Aachen Machine Tool Colloquium AWK'21 will take place on June 10 and 11, 2021

07.04.2020 | Event News

International Coral Reef Symposium in Bremen Postponed by a Year

06.04.2020 | Event News

 
Latest News

Perfect optics through light scattering

02.06.2020 | Power and Electrical Engineering

The digital construction site: A smarter way of building with mobile robots

02.06.2020 | Architecture and Construction

Process behind the organ-specific elimination of chromosomes in plants unveiled

02.06.2020 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>