Almost everyone uses nanometer-sized alumina these days - this mineral, among others, constitutes the skeleton of modern catalytic converters in cars. Until now, the practical production of nanocorundum with a sufficiently high porosity has not been possible. The situation has changed radically with the presentation of a new method of nanocorundum production, developed as part of a German-Polish cooperation of scientists from Mülheim an der Ruhr and Cracow.
High temperatures and pressures, processes lasting for even dozens of days. Current methods of producing nanometer-sized alumina, a material of significant industrial importance, can hardly be called ideal. The product itself is also far from ideal. Meanwhile, scientists from the Max-Planck-Institut für Kohlenforschung (MPI Kofo) in Mülheim an der Ruhr (Germany) found a simple process for the nanocorundum production.
Its thermodynamic basis is explained by an innovative theoretical model developed by Prof. Zbigniew Lodziana from the Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN) in Cracow. The model suggests that nanometer-sized corundum can be formed in conditions that are radically friendlier to the environment. The success of the German-Polish group turned out to be so significant that it has found recognition in the eyes of the editors of Science, one of the most respected scientific journals in the world.
"Corundum nanoparticles, produced by the method proposed by us, are about 13 nanometers in size and are characterized by considerable porosity: one gram has a surface area of about 140 m2. This is about an order of magnitude higher than the value typical for nanocorundum produced by means of currently known technological processes", says Prof. Lodziana.
Corundum, the most stable form of alumina Al2O3 (denoted by the Greek letter alpha), is a common mineral. Due to its hardness it is commonly used, among others, as an abrasive. Car catalytic converters are a popular application for alumina. Here, it serves as a porous undercoat for active transition metal particles (e.g. palladium), which are responsible for removing carbon monoxide and nitrogen oxides from exhaust fumes. Large, transparent corundum crystals are rare and they are considered to be precious stones; depending on their admixtures they take on different colours, e.g. red (rubies) or blue (sapphires).
"The problem with the simple and efficient production of nanometer-sized alumina really boils down to removing the water molecules covering the bulk of aluminum hydroxide. At present, intense heat and/or high pressure are used for this purpose. Unfortunately, during heating nanoparticles grow. This means that their total surface area decreases, and therefore the functional properties of the material deteriorate", explains Prof. Lodziana.
Porous aluminas are currently produced from the most readily available aluminum hydroxide. This white powder, called boehmite, has to be exposed to a temperature of over 700 Kelvin at a pressure of approx. 1200 atmospheres. These conditions must be maintained for more than a month. In the final phase, lasting up to ten hours, the temperature rises to over 800 K. Another classic method of production is heating for a dozen or so hours to a temperature of over 800 K, after which for another dozen or so hours the temperature is raised to even over 1600 K.
Shedding light on the fact that it is possible to remove water molecules from boehmite with the help of small amounts of energy provided, among others, in mechanochemical reactions, was very significant to understand how boehmite converts to nanocorundum.
While typical chemical reactions involve solutions or gases, in mechanochemistry the processes take place between solids, usually prepared in the form of powders. The energy necessary to carry out the reaction here is mechanical energy, supplied during milling in mechanical mills (sometimes even grinding by hand is sufficient).
During work on the new method, it was demonstrated, both practically and theoretically, that it is possible to obtain nanometer-sized corundum while maintaining its stability and significant porosity. This effect was achieved by the appropriate selection of the operating parameters of the ball mills in which the milling occurred. The goal was to create a situation where the amount of energy locally supplied to the system exceeds the energy of bonding of water molecules by boehmite, which results in their release from the surface.
"Against the background of previous, multi-stage methods, ours stands out for its extreme simplicity: all we do is to mill a powder in a ball mill for some time. Importantly, the process takes place at room temperature and requires only a few hours to achieve thermodynamically stable corundum nanoparticles", emphasizes Prof. Lodziana.
The presented method of producing nanocorundum reduces not only energy, but also the financial costs associated with the production of high-quality corundum nanoparticles to a minimum.
The theoretical part of the described research, carried out at the Institute of Nuclear Physics of the Polish Academy of Sciences, was financed from its statutory funds.
The Henryk Niewodniczanski Institute of Nuclear Physics (IFJ PAN) is currently the largest research institute of the Polish Academy of Sciences. The broad range of studies and activities of IFJ PAN includes basic and applied research, ranging from particle physics and astrophysics, through hadron physics, high-, medium-, and low-energy nuclear physics, condensed matter physics (including materials engineering), to various applications of methods of nuclear physics in interdisciplinary research, covering medical physics, dosimetry, radiation and environmental biology, environmental protection, and other related disciplines. The average yearly yield of the IFJ PAN encompasses more than 600 scientific papers in the Journal Citation Reports published by the Thomson Reuters. The part of the Institute is the Cyclotron Centre Bronowice (CCB) which is an infrastructure, unique in Central Europe, to serve as a clinical and research centre in the area of medical and nuclear physics. IFJ PAN is a member of the Marian Smoluchowski Kraków Research Consortium: "Matter-Energy-Future" which possesses the status of a Leading National Research Centre (KNOW) in physics for the years 2012-2017. The Institute is of A+ Category (leading level in Poland) in the field of sciences and engineering.
Prof. Zbigniew Lodziana
The Institute of Nuclear Physics, Polish Academy of Sciences
tel.: +48 12 6628267
"High-surface-area corundum by mechanochemically induced phase transformation of boehmite"
A. P. Amrute, Z. Lodziana, H. Schreyer, C. Weidenthaler, F. Schüth
Science, Vol. 366, Issue 6464, pp. 485-489
The website of the Max-Planck-Institut für Kohlenforschung.
The website of the Institute of Nuclear Physics Polish Academy of Sciences.
Press releases of the Institute of Nuclear Physics Polish Academy of Sciences.
Three-dimensional visualization of corundum nanoparticles. A real microscopic image in the background (false colors). (Source: IFJ PAN, MPI Kofo)
Theoretical tubulanes inspire ultrahard polymers
13.11.2019 | Rice University
New opportunities in additive manufacturing presented
13.11.2019 | Fraunhofer IFAM Dresden
Carbon nanotubes (CNTs) are valuable for a wide variety of applications. Made of graphene sheets rolled into tubes 10,000 times smaller than a human hair, CNTs have an exceptional strength-to-mass ratio and excellent thermal and electrical properties. These features make them ideal for a range of applications, including supercapacitors, interconnects, adhesives, particle trapping and structural color.
New research reveals even more potential for CNTs: as a coating, they can both repel and hold water in place, a useful property for applications like printing,...
If you've ever tried to put several really strong, small cube magnets right next to each other on a magnetic board, you'll know that you just can't do it. What happens is that the magnets always arrange themselves in a column sticking out vertically from the magnetic board. Moreover, it's almost impossible to join several rows of these magnets together to form a flat surface. That's because magnets are dipolar. Equal poles repel each other, with the north pole of one magnet always attaching itself to the south pole of another and vice versa. This explains why they form a column with all the magnets aligned the same way.
Now, scientists at ETH Zurich have managed to create magnetic building blocks in the shape of cubes that - for the first time ever - can be joined together to...
Quantum-based communication and computation technologies promise unprecedented applications, such as unconditionally secure communications, ultra-precise...
In two experiments performed at the free-electron laser FLASH in Hamburg a cooperation led by physicists from the Heidelberg Max Planck Institute for Nuclear physics (MPIK) demonstrated strongly-driven nonlinear interaction of ultrashort extreme-ultraviolet (XUV) laser pulses with atoms and ions. The powerful excitation of an electron pair in helium was found to compete with the ultrafast decay, which temporarily may even lead to population inversion. Resonant transitions in doubly charged neon ions were shifted in energy, and observed by XUV-XUV pump-probe transient absorption spectroscopy.
An international team led by physicists from the MPIK reports on new results for efficient two-electron excitations in helium driven by strong and ultrashort...
An international research group has observed new quantum properties on an artificial giant atom and has now published its results in the high-ranking journal Nature Physics. The quantum system under investigation apparently has a memory - a new finding that could be used to build a quantum computer.
The research group, consisting of German, Swedish and Indian scientists, has investigated an artificial quantum system and found new properties.
05.11.2019 | Event News
30.10.2019 | Event News
02.10.2019 | Event News
13.11.2019 | Physics and Astronomy
13.11.2019 | Physics and Astronomy
13.11.2019 | Materials Sciences