The aerodynamics inside jet engines are not completely understood due to the unpredictable nature of the air flowing through the turbine. However, a research team led by Dr Jim Barton from Heriot-Watt University, has developed tiny fibre optic pressure sensors that can for the first time be used inside jet engine test rigs. These sensors should allow engineers to collect data that will enable them to make more aerodynamic engines, which will improve fuel efficiency and engine performance, ensuring lo

Will we pay using our fingerprint, or enter a building just touching a sensor? Does our mobile phone recognize our fingerprint? It is possible, as far as Dutch PhD student Asker Bazen is concerned. He has improved the verification techniques, resulting in a better result even for deformed and damaged prints. Together with a higher speed, the new methods can take away existing reserves for implementing fingerprint verification. Bazen is finishing his PhD research at the faculty of Electrical Engineeri

Scientists at Northwestern University have developed a powerful new method for detecting infectious diseases, including those associated with many bioterrorism and warfare threats such as anthrax, tularemia, smallpox and HIV.

A research team led by Chad A. Mirkin, director of Northwestern’s Institute for Nanotechnology, has invented a technique for creating thousands of DNA detection probes made of gold nanoparticles with individual molecules attached. Much like human fingerprints, the

In the search for a nonpolluting energy source, hydrogen is often cited as a potential source of unlimited clean power. But hydrogen is only as clean as the process used to make it. Currently, most hydrogen is made from fossil fuels like natural gas using multi-step and high-temperature processes.

Now, chemical engineers at the University of Wisconsin-Madison have developed a new process that produces hydrogen fuel from plants. This source of hydrogen is non-toxic, non-flammable and can be

Medical researchers would like to use nano-scale tubes to push very tiny amounts of drugs dissolved in water to exactly where they are needed in the human body.

The roadblock to putting this theory into practical use has been the challenge of building pumps small enough to do the job. In addition to the engineering challenge of building a nano-scale pump, there is the added complication of clogging by any biological molecule that can occur in valves small enough to fit a channel the size of

Advance Should Speed Semiconductor Industry Search

Researchers from the Commerce Department’s National Institute of Standards and Technology (NIST) reported today they have developed methods for characterizing key structural features of porous films being eyed as insulators for the ultrathin metal wires that will connect millions of devices on future microprocessors and increase processor speed. The advance, reported today at the American Chemical Society’s national meeting

There may well be a plastic biochip in your future, thanks in part to the National Institute of Standards and Technology (NIST).

Microfluidics devices, also known as “lab-on-a-chip” systems, are miniaturized chemical and biochemical analyzers that one day may be used for quick, inexpensive tests in physicians’ offices. Most microfluidics devices today are made of glass materials. Cheaper, disposable devices could be made of plastics, but their properties are not yet well understood.

Researchers have shown how tiny wires and metallic spheres might be arranged in various shapes to form “nanoantennas” that dramatically increase the precision of medical diagnostic imaging and devices that detect chemical and biological warfare agents.

Engineers from Purdue University have demonstrated through mathematical simulations that nanometer-scale antennas with certain geometric shapes should be able to make possible new sensors capable of detecting a single molecule of a chemical or

The hassle of removing and cleaning your contacts every night, or even every month, could become a thing of the past, based on a study involving a new contact lens coating that kills bacteria.

The study involved rabbits. The coating: an extremely thin layer of selenium, a naturally occurring element found in soil, some plants and many foods we eat.

The rabbits showed no ill effects after two consecutive months of wearing the coated lenses, according to Ted Reid, Ph.D., of Texas Te

In the search for low-cost color displays that do not drain a computer’s battery, the polymer light-emitting electrochemical cell (LEC) may be the next answer to the problem, according to an international team of electrical engineers.

“The color-variable LEC can provide a solution to simple, low cost color displays,” Cheng Huang, graduate student in electrical engineering at Penn State told attendees today (Aug. 20) at the 224th American Chemical Society annual meeting in Boston.

A new way researchers have developed to make dense ceramics in complex shapes could lead to light, tough, and hard ceramic parts at lower cost.

The recently patented technique, called “displacive compensation of porosity,” or DCP, uses a chemical reaction between molten metal and a porous ceramic to generate a new composite material. The technique fills the tiny pores inside the ceramic with additional ceramic material. The resulting super-dense part retains the shape of the original ceramic

A series of obstacles fell before the onslaught of a Penn State engineering graduate class as they tackled and found solutions to all the barriers preventing development of a hybrid fuel cell automobile using hydrogen fuel cells and battery storage.

“The professors asked the class to solve the problem of hydrogen odorization,” says Jamie Weston, graduate student in energy and geoenvironmental engineering. “We quickly came up with a solution and, took the rest of the course to develop our so

Australian researchers have created the ideal manufacturing material of the future – clean, green ‘super steel’ that is double the strength of normal steel and resistant to fracture.

“Stronger steel means less material is required to support a load or resist a force, which should lead to lighter structures and vehicles,” says Deakin University researcher, Dr Georgina Kelly.

“This would deliver reduced energy needs and emissions in cars, and greater potential to develop more complex

Researchers at Purdue University have made a surprising discovery that could open up numerous applications for metal “nanocrystals,” or tiny crystals that are often harder, stronger and more wear resistant than the same materials in bulk form.

The research engineers have discovered that the coveted nanocrystals are contained in common scrap, the chips that are normally collected and melted down for reuse.

“Imagine, you have all of these bins full of chips, and they get melted down

Researchers at Oxford University’s Physics Department have developed an extraordinarily versatile proximity sensor for the detection of objects, composed of ferrous and non-ferrous metals, ceramics, glasses and plastics. This new device could be used as a position or speed sensor in automotive suspension, gearbox and engine management systems, amongst many other uses.

Researchers had identified the need for a relatively simple, but highly versatile proximity sensor to detect the motion of a

The white cane used by the blind as a travel aid may be universal, but it is not always adequate when it comes to pedestrian crossings. Although some crossings make a sound when it is safe to cross, many do not, and it is at these crossings that the blind need to know when the green man is showing. Adaptations of the white cane have been made, which use laser or ultrasonic waves to detect more distant obstacles, but they do not give information about the width of the road or colour of the traffic lig