Researchers have discovered that eliminating cells thought to aid tumor growth did not slow or halt the growth of cancer tumors. In fact, when the…
Researchers at RMIT University and the University of Adelaide have joined forces to create a stretchable nano-scale device to manipulate light.
POLARIS is the world's most powerful fully diode-pumped laser system and with it, the University of Jena possesses a petawatt-class laser, which produces the…
The Heidelberg-based IT company EML European Media Laboratory GmbH will be presenting its products at this year’s CCW trade fair (hall 2, C19). The fair is…
Researchers at the Institute of Pharmacy and Molecular Biotechnology of Heidelberg University are exploring new approaches to the treatment of diseases of the…
It is known, that the electric stimulation of the Stapedius muscle by the brain is not following a 0-1 scheme. Rather, it is following in a continuous curve which correlates with the signal intensity. Because of this, the invention aims to deliver a method for continuously (re-) calibrating every amplification factor.
The invention solves this task by using an integrated control system. This system compares the outer microphone volume with a target curve, which causes the Stapedius muscle to behave in a certain way. If the measured muscle behavior is different from the expected one, this system changes the amplifying parameters.
By observing and storing the Stapedius activity it is possible to make the amplification factors dependent on the volume, which makes a nonlinear amplification possible.
The invention delivers a solution, which is an energetically and ecologically better method, along with the required device for separating carbon dioxide from the exhaust fumes of combustion engines, based on thermodynamic arrangements. To do so, the gas mass, which is fed to and exhausted from the engine is conditioned in such a way that it is possible to lower the exhaust conditions enough for 〖CO〗_2 condensation. The conditioning is done in regards to temperature and pressure. Doing so causes the carbon dioxide to change its aggregate state to liquid, which makes separation and storing of 〖CO〗_2 possible. The energy for this process is taken out of the engine exhaust and from the engine power. The energy exchange is done with heat exchangers. An additional medium is used as heat storage, while the enthalpy of this medium can be used for recovery processes.
The present invention using the acoustically induced laser scattering (ALS) avoids these disadvantages by applying the principle of the acousto-optical modulation. By an appropriate arrangement of an ultraultrasonic source, a sonic grid which diffracts laser light is generated in the material. By exclusively using the diffraction peak of
the laser light in a test object, the invention enables new possibilities of non-invasive determination of relevant rheological and other mechanical properties. With this method, a non-destructive measurement of little technical effort and very short measuring times gets possible. Especially
it is, in contrast to conventional rheometers, suitable for in situ measurements. Thus, the invention has a big market potential in the fields of materials science, materials testing and quality assurance.
The invention relates to a constructive alteration of the ultrasonic transducers for an ultrasonic reflection and transmission measurement. The core of the invention is the placement of the transducers in a U-form with several ultrasonic transducers on the inside, which allow the measurement of irregular bodies and bodies with high ultrasonic dampening. Additionally the device uses constant flow of coupling agents by pumps. Several openings on the inside provide the testing body with a suitable agent with ensures the required coupling of the materials.
The invention provides a surgical tool, which generates a precise, pre-defined cut surface so that a good fit between the contact surfaces of the prosthesis and the bone is ensured.
The removal is affected by the use of a tool that has a vibrating unit and a holding part, which is important for directing to the bone.
There is an oscillating stroke movement along an axis parallel to the mounting direction of the joint prosthesis, as well as rotational movement about the same axis. The moving tool head has lying surfaces at an angle to one another, which are then adapted to the contact surfaces of joint prostheses. In order to produce defined-sectional areas, the holding part is fixed in the bone intramedullary, to ensure a guide of the surgical tool with fastening elements.
Fatigue tests can be implemented for stents in different forms and fabrics, even grafts and drug eluting stents. The device is working at 20 kHz and can generate up to 50.000 load cycles per second. Test time is reduced from weeks to hours.
Here we offer a technology that allows formation of III-V-material vertical nanowire lasers grown directly on a silicon wafer as a substrate. This opens the door to CMOS-conform production of telecom-lasers as well as new logical chip architectures.
The new report is the first to integrate scientists' knowledge about groundwater in the U.S. West with scientific models that show how climate change will…
The ultrafast optical microscope assembled by the research team is 1,000 times more powerful than a conventional optical microscope, said CU-Boulder physics…
Diabetes describes a disease where the body is not receiving a sufficient supply of insulin. It commonly inflicts the pancreas, the organ responsible for…
In a new study that provides clues about how Antarctica's nation-sized Ross Ice Shelf might respond to a warming climate, U.S. and Japanese oceanographers have…
Feedback
