Siemens at the Hannover Messe 2015: Hall 9, Booth D35
The Simotics HV M series with a shaft height of 800 millimeters is the latest addition to Siemens' portfolio of modular, high-voltage motors. In the 4-pole and 6-pole variants, outputs of up to 18 MW at 6 kV (50 Hz) are now achievable, extending the benefits of a modular motor concept to users in this performance class.
Standardized production and test processes cut lead times, increase plant availability and simplify spare parts storage. Integration into standard tools such as Sizer Web Engineering shortens project planning times, and the tool also supports users in configuring system components.
A wide range of options means that Simotics HV M motors can be adapted precisely to the individual applications; special paint systems, for example, protect against salty or other aggressive environments. In the Ex p or Ex n variant, the motors are suitable for use in areas subject to explosion hazards.
Variants are also available for use in extremely low temperatures down to -50°C or in applications with rigorous vibration quality requirements in line with the API standard.
The Simotics HV M motors can be equipped with a predictive condition monitoring system, and can be combined with Sinamics medium-voltage converters to form Integrated Drive Systems. On the design side, customers benefit in particular from the reduced weight of the steel enclosure, which makes it easier to transport the motors and integrate them into the plant. The increased torsional stiffness of the motors boosts reliability and makes for greater plant availability.
Simotics HV M motors are used above all in compressor applications such as gas pipelines, gas storage facilities, air separation units and rolling mills.
For further information on Simotics HV M motors, visit www.siemens.com/simotics
Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of combined cycle turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2014, which ended on September 30, 2014, Siemens generated revenue from continuing operations of €71.9 billion and net income of €5.5 billion. At the end of September 2014, the company had around 357,000 employees worldwide. Further information is available on the Internet at www.siemens.com
Reference Number: PR2015020106PDEN
Mr. Stefan Rauscher
Process Industries and Drives Division
Gleiwitzer Str. 555
Tel: +49 (911) 895-7952
Stefan Rauscher | Siemens Process Industries and Drives
Further reports about: > Integrated Drive System > Modular > Siemens > Simotics > computed tomography > gas storage > laboratory diagnostics > magnetic resonance > magnetic resonance imaging > monitoring system > offshore wind turbine > power generation > rolling mills > storage facilities > wind turbine
COMPAMED 2016 connected medical devices and people
23.11.2016 | IVAM Fachverband für Mikrotechnik
Successfully transferring Industrie 4.0 into reality
21.11.2016 | Deutsches Forschungszentrum für Künstliche Intelligenz GmbH, DFKI
Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.
Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...
In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.
Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...
Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...
A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.
Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...
In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.
“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...
16.11.2016 | Event News
01.11.2016 | Event News
14.10.2016 | Event News
09.12.2016 | Life Sciences
09.12.2016 | Ecology, The Environment and Conservation
09.12.2016 | Health and Medicine