Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Creating living spaces for people: The »Fraunhofer CityLaboratory« at BAU 2017

14.10.2016

Digitization and urbanization, resource and energy efficiency, demographic change and climate change require intensive examination and innovative and sustainable solutions by society, economy and research. In this context, interdisciplinary action continues to gain importance. The Fraunhofer Building Innovation Alliance combines the competence of 14 Fraunhofer institutes to provide interdisciplinary solutions for the building industry. In the scope of its special show »Fraunhofer CityLaboratory – Creating living spaces for people« introduced at the BAU 2017 trade fair, the Fraunhofer Building Innovation Alliance presents products and solutions from building research in Hall C2, Booth 538.

According to an analysis conducted by the HypoVereinsbank and Roland Berger, the building sector in Germany has experienced a positive development since 2011 – a trend which is set to continue. For the German building industry, this study predicts an annual growth rate of 1.5 percent in the next few years. Between 2010 and 2015, the average annual growth already was 1.3 percent.


The Fraunhofer CityLaboratory – an overview

© Fraunhofer Building Innovation Alliance / Expotechnik

With this, the German building sector had the fifth-largest rate of growth in the EU in the respective period, inferior only to Poland, Great Britain, Sweden, and Belgium. However, such figures cannot be taken for granted.

In this context, particularly the increasing demand for housing space in metropolitan areas in the wake of urbanization boosts growth. Besides, other trends such as energy retrofitting of buildings, increasing digitization in the building sector, and demographic change also give new impetus to growth.

Building research and the building industry need to find answers to complex questions: How can the principle of sustainability be more firmly embedded in the construction process and in building operation, in order to better protect resources and the climate? How may increasing digitization be integrated in everyday building routines? How must spaces be designed to ensure both safety and a versatile and healthy living environment?

With its Building Innovation Alliance, the German Fraunhofer-Gesellschaft provides the market with a single, central contact for integrated system solutions and market-oriented products relating to construction topics. Visitors of the BAU 2017 trade fair can become acquainted with the diverse developments in applied building research at the special exhibit »Fraunhofer CityLaboratory – Creating living spaces for people« displayed in Hall C2, Booth 538. Here, the 14 member institutes present innovative and sustainable solutions for products and systems relating to four topics, namely:

Digital planning, building and operating

For several years now the German construction industry has been coping with a below-average productivity growth. As laid out in the afore-mentioned study, the productivity in the building sector merely improved by 4.1 percent between 2000 and 2011, while the overall German economy increased by 11 percent in the same period. Last, but not least, this fact is also due to the hesitant reaction to the requirements posed by the fast-developing digitization. Industry 4.0 has become common practice by now, »Building Industry 4.0« has not.

A 2015 study conducted by the Fraunhofer Institute for Industrial Engineering IAO has shown that Building Information Modeling (BIM) was currently being used mainly in larger projects. Nonetheless, a 2014 EU-directive includes the use of BIM as a criterion in public tendering. Following this directive, the step-by-step plan »Digital Planning and Building« issued by the German Federal Ministry of Transport and Digital Infrastructure requires the use of BIM in public infrastructure projects in Germany as of 2020.

Not least owing to these requirements and the great potential held by this software-supported method of optimized design, execution and operation of buildings, member institutes of the Fraunhofer Building Innovation Alliance are conducting joint research with companies in this field. Yet, IT-supported methods such as digital planning using BIM are just the beginning.

For the future, digitization along the entire value-added chain is envisaged, from design and construction, building use and operation through to demolition and recycling. Beside sustainable design and control processes, optimization plays a key role in all building measures. Building optimization allows to improve quality and to prevent expensive long-term consequences.

Intelligent facades

Multifunctionality and energy efficiency describe the increasing requirements on modern facades as interfaces between the urban environment and an interior space. Being integral components of buildings, they not only have an architectural and a functional impact, but also economic and environmental effects. Safety and comfort experienced inside a building are increasingly complemented by the supply of energy and a positive effect on the urban space.

This is why researchers of the Fraunhofer Building Innovation Alliance develop and optimize innovative facade systems and concepts. Substantial new findings are presented: solar thermal facade units, photovoltaic modules featuring an innovative connection to bearing structures, components suited for vertical planting, units made of renewable raw materials for both external and internal walls.

Safety and comfort

Numerous threat scenarios such as extreme weather events, earthquakes or terrorist attacks require the reliable protection of buildings and infrastructure. The Fraunhofer institutes aim at reconciling these safety aspects with tasks of quality assurance, architectural design and the functionality of structures. In addition to requesting security, building users tend to attach greater importance to comfortable indoor environments.

Draft-free ventilation or living and working without being exposed to noise are just two aspects of many requirements contemporary building users want to be fulfilled in their environments. After all, human beings spend about 90 percent of their lifetime (on average) in indoor spaces. This is why building research aims at achieving optimum thermal comfort and a performance-enhancing indoor environment while limiting the use of energy and natural resources to a minimum.

Resource efficiency and energy management

Buildings and the infrastructure of urban centers are ranging among the biggest energy users worldwide. To ensure that the targets of energy policy will be accomplished in Germany and in many other countries, the focus is particularly on cities, which are required to improve their use of energy saving potentials. If the consumption of non-renewable energy shall be reduced and fossil fuels and other resources are to be saved, it is not sufficient to enhance the energy performance of buildings – the energy supply of buildings also needs to be improved. Another focus relating to this topic is on saving or substituting limited resources.

The fact that the worldwide use of primary materials has doubled in the last 30 years underlines the vital importance of this issue. The Fraunhofer Building Innovation Alliance is working on a wide range of diverse, innovative solutions. In addition to developing and using construction and insulation materials made from renewable raw materials, certain resource-saving measures can be implemented already before the construction work begins. Detailed analyses of the origin and the environmental impact of construction materials, making the most effective use of these materials, and ensuring their subsequent recyclability are further key levers prioritized in the research and development work carried out by the Fraunhofer Institutes.

Please find more information on the research fields of the Fraunhofer Building Innovation Alliance and its Institutes on our website: www.bau.fraunhofer.de/en

Weitere Informationen:

http://www.bau.fraunhofer.de/en.html
http://www.bau.fraunhofer.de/en/press_events/press.html

Presse Institute Kommunikation | Fraunhofer-Gesellschaft

Further reports about: BIM Innovation building industry facades raw materials

More articles from Trade Fair News:

nachricht COMPAMED 2016 connected medical devices and people
23.11.2016 | IVAM Fachverband für Mikrotechnik

nachricht Successfully transferring Industrie 4.0 into reality
21.11.2016 | Deutsches Forschungszentrum für Künstliche Intelligenz GmbH, DFKI

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

Im Focus: MADMAX: Max Planck Institute for Physics takes up axion research

The Max Planck Institute for Physics (MPP) is opening up a new research field. A workshop from November 21 - 22, 2016 will mark the start of activities for an innovative axion experiment. Axions are still only purely hypothetical particles. Their detection could solve two fundamental problems in particle physics: What dark matter consists of and why it has not yet been possible to directly observe a CP violation for the strong interaction.

The “MADMAX” project is the MPP’s commitment to axion research. Axions are so far only a theoretical prediction and are difficult to detect: on the one hand,...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Porous crystalline materials: TU Graz researcher shows method for controlled growth

07.12.2016 | Materials Sciences

Simple processing technique could cut cost of organic PV and wearable electronics

06.12.2016 | Materials Sciences

3-D printed kidney phantoms aid nuclear medicine dosing calibration

06.12.2016 | Medical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>