Biocompatible fibers could use light to stimulate cells or sense signs of disease
Researchers from MIT and Harvard Medical School have developed a biocompatible and highly stretchable optical fiber made from hydrogel -- an elastic, rubbery material composed mostly of water. The fiber, which is as bendable as a rope of licorice, may one day be implanted in the body to deliver therapeutic pulses of light or light up at the first sign of disease.
MIT researchers have developed a stretchy optical fiber in which they have injected multiple organic dyes (yellow, blue, and green regions). In addition to lighting up, the dyes act as a strain sensor, enabling researchers to quantify where and by how much a fiber has been stretched.
Courtesy of the researchers
The researchers say the fiber may serve as a long-lasting implant that would bend and twist with the body without breaking down. The team has published its results online in the journal Advanced Materials.
Using light to activate cells, and particularly neurons in the brain, is a highly active field known as optogenetics, in which researchers deliver short pulses of light to targeted tissues using needle-like fibers, through which they shine light from an LED source.
"But the brain is like a bowl of Jell-O, whereas these fibers are like glass -- very rigid, which can possibly damage brain tissues," says Xuanhe Zhao, the Robert N. Noyce Career Development Associate Professor in MIT's Department of Mechanical Engineering. "If these fibers could match the flexibility and softness of the brain, they could provide long-term more effective stimulation and therapy."
Getting to the core of it
Zhao's group at MIT, including graduate students Xinyue Liu and Hyunwoo Yuk, specializes in tuning the mechanical properties of hydrogels. The researchers have devised multiple recipes for making tough yet pliable hydrogels out of various biopolymers. The team has also come up with ways to bond hydrogels with various surfaces such as metallic sensors and LEDs, to create stretchable electronics.
The researchers only thought to explore hydrogel's use in optical fibers after conversations with the bio-optics group at Harvard Medical School, led by Associate Professor Seok-Hyun (Andy) Yun. Yun's group had previously fabricated an optical fiber from hydrogel material that successfully transmitted light through the fiber. However, the material broke apart when bent or slightly stretched. Zhao's hydrogels, in contrast, could stretch and bend like taffy. The two groups joined efforts and looked for ways to incorporate Zhao's hydrogel into Yun's optical fiber design.
Yun's design consists of a core material encased in an outer cladding. To transmit the maximum amount of light through the core of the fiber, the core and the cladding should be made of materials with very different refractive indices, or degrees to which they can bend light.
"If these two things are too similar, whatever light source flows through the fiber will just fade away," Yuk explains. "In optical fibers, people want to have a much higher refractive index in the core, versus cladding, so that when light goes through the core, it bounces off the interface of the cladding and stays within the core."
Happily, they found that Zhao's hydrogel material was highly transparent and possessed a refractive index that was ideal as a core material. But when they tried to coat the hydrogel with a cladding polymer solution, the two materials tended to peel apart when the fiber was stretched or bent.
To bond the two materials together, the researchers added conjugation chemicals to the cladding solution, which, when coated over the hydrogel core, generated chemical links between the outer surfaces of both materials.
"It clicks together the carboxyl groups in the cladding, and the amine groups in the core material, like molecular-level glue," Yuk says.
The researchers tested the optical fibers' ability to propagate light by shining a laser through fibers of various lengths. Each fiber transmitted light without significant attenuation, or fading. They also found that fibers could be stretched over seven times their original length without breaking.
Now that they had developed a highly flexible and robust optical fiber, made from a hydrogel material that was also biocompatible, the researchers began to play with the fiber's optical properties, to see if they could design a fiber that could sense when and where it was being stretched.
They first loaded a fiber with red, green, and blue organic dyes, placed at specific spots along the fiber's length. Next, they shone a laser through the fiber and stretched, for instance, the red region. They measured the spectrum of light that made it all the way through the fiber, and noted the intensity of the red light. They reasoned that this intensity relates directly to the amount of light absorbed by the red dye, as a result of that region being stretched.
In other words, by measuring the amount of light at the far end of the fiber, the researchers can quantitatively determine where and by how much a fiber was stretched.
"When you stretch a certain portion of the fiber, the dimensions of that part of the fiber changes, along with the amount of light that region absorbs and scatters, so in this way, the fiber can serve as a sensor of strain," Liu explains.
"This is like a multistrain sensor through a single fiber," Yuk adds. "So it can be an implantable or wearable strain gauge."
The researchers imagine that such stretchable, strain-sensing optical fibers could be implanted or fitted along the length of a patient's arm or leg, to monitor for signs of improving mobility.
Zhao envisions the fibers may also serve as sensors, lighting up in response to signs of disease.
"We may be able to use optical fibers for long-term diagnostics, to optically monitor tumors or inflammation," he says. "The applications can be impactful."
This research was supported, in part, by the National Institutes of Health, and the Department of Defense.
Written by Jennifer Chu, MIT News Office
PAPER: Highly Stretchable, Strain Sensing Hydrogel Optical Fibers
ARCHIVE: Tough new hydrogel hybrid doesn't dry out
ARCHIVE: Stretchable hydrogel electronics
ARCHIVE: Hydrogel superglue is 90 percent water
Abby Abazorius | EurekAlert!
Sensors embedded in sports equipment could provide real-time analytics to your smartphone
16.02.2017 | University of Illinois College of Engineering
Researchers catch extreme waves with higher-resolution modeling
15.02.2017 | DOE/Lawrence Berkeley National Laboratory
In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport
Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...
The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.
The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...
Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...
Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".
Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...
13.02.2017 | Event News
10.02.2017 | Event News
09.02.2017 | Event News
17.02.2017 | Medical Engineering
17.02.2017 | Medical Engineering
17.02.2017 | Health and Medicine