The innovative touch display series WAY-AX and WAY-DX for the process control in the manufacturing of high quality products.
Better usability by a wide range of models.
Process Indicator WAY-AX
► for two analog values or potentiometer input
► applicable as flow meter, level meter, pressure meter etc.
Digital Indicator WAY-DX
► for incremental encoder or sensor signals
► applicable as counter, position meter, tachometer, frequency meter, speed meter etc.
► additional functions e.g. timer, calculation of process time, reciprocal calculation
Better Visibility by a strong contrast & high resolution
Dot Matrix Display with 186 x 64 pixel
► clear text explanations and commands are providing an intuitive menu structure
► a wide range of units as well as any kind of symbols can be displayed
Three color LED-Backlight (green, yellow, red)
► color can be adjusted easily by just one parameter
► event depending color change, e. g. below limit, close limit, over limit
Better flexibility by touch & optional modules
Resistive Touch Panel with IP65 protection and enhanced
temperature range (-20°C … 60°C)
► Suitable for rough environmental conditions
► Can be operated with any kind of working gloves, no limits on the used material
► Maximum flexibility by modular design
► 2 analog inputs (16 bit), 3 control inputs
► ±10 V / 0 … 20 mA / 4 … 20 mA
► accurate 10 V reference output for potentiometers
► mode for single, dual or cross calculated inputs
► totalization, tare, average filter, etc. for each input
► totalization of sum / difference of both inputs
► linearization with 24 set points for each input
► 2 incremental inputs (HTL), 3 control inputs
► for PNP, NPN or NAMUR sensors
► up to 250 kHz
► for speed, process time, timer, counter or velocity application
► linearization with 24 set points
► scaling, average filter, start up suppression
WayCon Positionsmesstechnik GmbH has been developing and manufacturing precision sensors for position and distance measurement since 1999. As an innovative company with headquarters in Taufkirchen near Munich and a branch in Brühl near Cologne, we sell our products all over the world. Our goal is to provide our customers with the best possible measurement technique solution: from high-quality sensors from the standard range to customer-specific solutions, from prototype to series production – for the most varied applications in industry and research. The products made in Taufkirchen are subject to rigorous quality standards and every single one is delivered to our customers with a calibration certificate.
WayCon Positionsmesstechnik GmbH
Marcus Venghaus | WayCon Positionsmesstechnik GmbH
Improved stability of plastic light-emitting diodes
19.04.2018 | Max-Planck-Institut für Polymerforschung
Intelligent components for the power grid of the future
18.04.2018 | Christian-Albrechts-Universität zu Kiel
University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.
Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.
Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.
Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...
Novel highly efficient and brilliant gamma-ray source: Based on model calculations, physicists of the Max PIanck Institute for Nuclear Physics in Heidelberg propose a novel method for an efficient high-brilliance gamma-ray source. A giant collimated gamma-ray pulse is generated from the interaction of a dense ultra-relativistic electron beam with a thin solid conductor. Energetic gamma-rays are copiously produced as the electron beam splits into filaments while propagating across the conductor. The resulting gamma-ray energy and flux enable novel experiments in nuclear and fundamental physics.
The typical wavelength of light interacting with an object of the microcosm scales with the size of this object. For atoms, this ranges from visible light to...
Stable joint cartilage can be produced from adult stem cells originating from bone marrow. This is made possible by inducing specific molecular processes occurring during embryonic cartilage formation, as researchers from the University and University Hospital of Basel report in the scientific journal PNAS.
Certain mesenchymal stem/stromal cells from the bone marrow of adults are considered extremely promising for skeletal tissue regeneration. These adult stem...
In the fight against cancer, scientists are developing new drugs to hit tumor cells at so far unused weak points. Such a “sore spot” is the protein complex...
13.04.2018 | Event News
12.04.2018 | Event News
09.04.2018 | Event News
20.04.2018 | Physics and Astronomy
20.04.2018 | Interdisciplinary Research
20.04.2018 | Physics and Astronomy