Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

PURA – the revolution in water baths

25.11.2016

JULABO´s new PURA water baths set a completely new standard. Their modern design supports the water baths´ practical features while the enamel finish provides increased efficiency and a range of advantages in everyday laboratory work. 

The enamel surface coatings are scratch-resistant and too smooth for bacteria and other organisms to take hold and breed. Contaminants also won't stick to the glass-hard enamel surface, which makes PURA water baths easy to clean without additional agents.

Hygienic protection is also ensured – even beyond what stainless steel can offer. The special state-of-the-art enamel surface coating of JULABO PURA water baths can only be destroyed with the use of force. They guarantee the highest level of durability and longevity.

Enamel not only offers product advantages, but also manufacturing advantages. All of the materials required to produce the baths will be available in sufficient quantities over the long term and do not contain any substances that are deemed unsafe for the environment. The manufacturing processes are all eco-friendly. That means no impact on employees or the environment.

The PURA water bath series comes in five models in differing sizes. With a filling volume range of 1 to 30 liters, they are suitable for both small and large temperature control tasks. All PURA water baths cover a working temperature range from +25 °C to +99.9 °C and feature temperature stability
of ±0.2 °C.

The heating capacity for the two large PURA models amounts to 2 kW; for the two medium-size models 1.3 kW; and for the smallest water bath 0.8 kW. The PURA 4 model measures just 21 x 38 x 30 cm but still offers all the advantages of the PURA series despite limited space.
With a filling volume of 0.4 to 4.8 liters, even the smallest sample containers can be tempered
without problems.

Sophisticated functionality and safety in the laboratory

The development of the PURA water baths focused primarily on the ease of use and practicality in everyday operations. The unit is controlled directly from the front and the bright display makes it easy to read even from a distance. The lift-up bath covers (available as accessories) can be removed and mounted without the use of tools.

They can easily be operated by right-handed as well as left-handed users. The carrying handles make it easy to relocate and transport these lightweight water baths. The built-in drain tap allows you to empty the baths cleanly and efficiently at any location.

PURA water baths were also designed to be spill-proof, making them ideal for use in the laboratory, and non-slip rubber studs prevent slipping on smooth surfaces. There are no disturbing parts inside the bath, so the completely flat surface can be used to reliably temper even small sample containers. The baths therefore offer extremely large volumes relative to their outer dimensions.

They have a built-in drip off design that ideally suits the test tube racks, which are sold as accessories. The internal timer function ensures precision and reliability, and an alarm signals the end of the specified time. Depending on the setting, the device either continues to operate or switches off.

Maximum efficiency

Energy from the integrated heater is transferred using aluminum walls that have ten times the thermal conductivity of stainless steel. In addition, the polycarbonate side walls offer significantly better insulation than stainless steel, which results in optimum efficiency.

Durable and safe

Compared to conventional water baths, all PURA water baths parts that come into contact with the medium are permanently protected from corrosion. Contact corrosion caused by ion migration or element formation is interrupted as well. The special enamel surface coating in PURA water baths is particularly resistant and can only be ruined with the use of force. The integrated dry-running protection and abnormal temperature protection prevent damage to the water baths.

Accessories for more flexibility

JULABO offers an extensive range of accessories for added flexibility in everyday laboratory operations. When using the plastic test tube racks, you can easily and neatly temper applications.
They are designed for 60 or 90 test tubes or 21 tubes with 30 mm diameter. JULABO's range of accessories also include bath covers with sets of rings for tempering Erlenmeyer flasks and similar. The diameters of the ring openings vary from 92 to 190 mm. A stents lifter and a stainless steel hygiene insert are available as dentistry accessories for the PURA 4 small water bath.

For further information:
http://www.julabo.com/en/products/water-bath

Download the PURA brochure:
http://www.julabo.com/sites/default/files/downloads/catalogue-flyer/JULABO-PURA-Water-Bath-Brochure.pdf

Contact:

JULABO GmbH

Markus Ketterer

Phone +49 (0) 7823 51-21

m.ketterer@julabo.com

www.julabo.com

Markus Ketterer | JULABO GmbH

Further reports about: JULABO PURA water bath coating labortechnik stainless steel test tube tubes

More articles from Power and Electrical Engineering:

nachricht Perovskite-silicon solar cell research collaboration hits 25.2% efficiency
15.06.2018 | Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

nachricht Second heat source optimises heat pump system
12.06.2018 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Overdosing on Calcium

Nano crystals impact stem cell fate during bone formation

Scientists from the University of Freiburg and the University of Basel identified a master regulator for bone regeneration. Prasad Shastri, Professor of...

Im Focus: AchemAsia 2019 will take place in Shanghai

Moving into its fourth decade, AchemAsia is setting out for new horizons: The International Expo and Innovation Forum for Sustainable Chemical Production will take place from 21-23 May 2019 in Shanghai, China. With an updated event profile, the eleventh edition focusses on topics that are especially relevant for the Chinese process industry, putting a strong emphasis on sustainability and innovation.

Founded in 1989 as a spin-off of ACHEMA to cater to the needs of China’s then developing industry, AchemAsia has since grown into a platform where the latest...

Im Focus: First real-time test of Li-Fi utilization for the industrial Internet of Things

The BMBF-funded OWICELLS project was successfully completed with a final presentation at the BMW plant in Munich. The presentation demonstrated a Li-Fi communication with a mobile robot, while the robot carried out usual production processes (welding, moving and testing parts) in a 5x5m² production cell. The robust, optical wireless transmission is based on spatial diversity; in other words, data is sent and received simultaneously by several LEDs and several photodiodes. The system can transmit data at more than 100 Mbit/s and five milliseconds latency.

Modern production technologies in the automobile industry must become more flexible in order to fulfil individual customer requirements.

Im Focus: Sharp images with flexible fibers

An international team of scientists has discovered a new way to transfer image information through multimodal fibers with almost no distortion - even if the fiber is bent. The results of the study, to which scientist from the Leibniz-Institute of Photonic Technology Jena (Leibniz IPHT) contributed, were published on 6thJune in the highly-cited journal Physical Review Letters.

Endoscopes allow doctors to see into a patient’s body like through a keyhole. Typically, the images are transmitted via a bundle of several hundreds of optical...

Im Focus: Photoexcited graphene puzzle solved

A boost for graphene-based light detectors

Light detection and control lies at the heart of many modern device applications, such as smartphone cameras. Using graphene as a light-sensitive material for...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Munich conference on asteroid detection, tracking and defense

13.06.2018 | Event News

2nd International Baltic Earth Conference in Denmark: “The Baltic Sea region in Transition”

08.06.2018 | Event News

ISEKI_Food 2018: Conference with Holistic View of Food Production

05.06.2018 | Event News

 
Latest News

Carbon nanotube optics provide optical-based quantum cryptography and quantum computing

19.06.2018 | Physics and Astronomy

How to track and trace a protein: Nanosensors monitor intracellular deliveries

19.06.2018 | Life Sciences

New material for splitting water

19.06.2018 | Physics and Astronomy

VideoLinks
Science & Research
Overview of more VideoLinks >>>