Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

JULABO's New Presto® W50 and W50t - High dynamic temperature control systems for laboratories and industrial applications

03.02.2016

JULABO’s new PRESTO® models W50 and W50t provide a high dynamic temperature control system that can handle temperature ranges of -50°C to +250°C. Covering such an extremely broad temperature range means that the equipment is well-suited for demanding temperature applications such as reactors, mini-plants, pilot plants, material testing stands, micro-reactors, and material and component tests in the auto industry, for example.

The new water-cooled PRESTO® models are available in two versions: the W50 and the W50T with increased heating capacity. Both models cover an extremely broad working temperature range, from -50 °C to +250 °C.

The PRESTO® W50 provides a heating capacity of 6 kW, while the W50t provides double the heating capacity at 12 kW. Both instruments have a cooling capacity of up to 7.5 kW. They are ideally suited for compensating exothermic and endothermic reactions extremely quickly and have impressive, very rapid heat-up and cool-down times.

High-performance, maintenance free pumps deliver up to 3.2 bar or 76 l/min. Both models guarantee high flow rates at constant pressure and can interactively compensate changes in the viscosity of the tempering medium.

The integrated 5.7” industrial color touchscreen of the new PRESTO® provides high functionality and intuitive user guidance. Clear and well structured displays for values and graphics, all important information at a glance, detailed and easily understandable warning and help texts - these are just some of the advantages.

Extensive interfaces allow flexible usage, such as control and regulation via USB interface, data logging via USB or SD Card, integration in process bus solutions (i.e., 2 of 3 Profibus), remote control via Ethernet networks or wireless control through JULABO’s WirelessTEMP application.

Competent advising, a collaborative search process for suitable solutions with the customer and many other customer services ensure that JULABO users find the ideal temperature control solution. JULABO supports its customers with installation and calibration, preparation of documentation for equipment qualification and application training so that the JULABO users can quickly and confidently master
their equipment and use them for a long time.

The new PRESTO® on the internet
http://www.julabo.de/de/presto

PRESTO® W50 on the internet

http://www.julabo.com/us/products/highly-dynamic-temperature-control-systems/temperature-control-presto/presto-w50

PRESTO® W50t in the internet

http://www.julabo.com/us/products/highly-dynamic-temperature-control-systems/temperature-control-presto/presto-w50t

Download whitepaper “Optimal Temperature Solution”
http://www.julabo.com/sites/default/files/Downloads/News/english/Whitepaper-Optimal-Temperature-solution-EN.pdf


Contact:
JULABO GmbH
Markus Ketterer
Tel. +49 (0) 7823 / 51-21
m.ketterer@julabo.com
www.julabo.com

Julabo GmbH
JULABO was founded in Germany in 1967. The company represents innovation and competence in the field of temperature control technology for demanding applications. JULABO instruments with advanced control technology are used anywhere that high temperature precision or rapid reactions to temperature changes are required. More than 450,000 JULABO units installed around the world demonstrate a high level of acceptance among users in research and industry. JULABO has earned its place as one of the world’s leading firms in the field of temperature control solutions through its dedication to quality, German engineering, and rapid, competent support provided by local contacts.

Markus Ketterer | JULABO GmbH

More articles from Power and Electrical Engineering:

nachricht Silicon solar cell of ISFH yields 25% efficiency with passivating POLO contacts
08.12.2016 | Institut für Solarenergieforschung GmbH

nachricht Robot on demand: Mobile machining of aircraft components with high precision
06.12.2016 | Fraunhofer IFAM

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron highway inside crystal

Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.

Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Researchers identify potentially druggable mutant p53 proteins that promote cancer growth

09.12.2016 | Life Sciences

Scientists produce a new roadmap for guiding development & conservation in the Amazon

09.12.2016 | Ecology, The Environment and Conservation

Satellites, airport visibility readings shed light on troops' exposure to air pollution

09.12.2016 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>