WayCon Positionsmesstechnik offers an excellent solution for measurement tasks, when high-resolution sensors are required to measure on challenging targets in difficult environments: The capacitive sensor series KS.
As the target's material and surface have no influence on the measurement, the sensors are ideal for thickness, distance, or position determination. A typical application is the quality control of precision mechanics.
Another big advantage of capacitive sensors is that they are capable to measure independent of the target's temperature.
Manufacturing tolerances of hot work pieces can be checked and even controlling the abrasion of brake discs under load is possible.
The sensors are suitable for a temperature range of -50 up to +200°C. They even work in high vacuum, or in a radioactive environment. Other typical applications for capacitive sensors is the use in squeezers, motors, or climatic chambers.
The KS capacitive sensors are available with measurement ranges from 0.05 mm, up to maximum 10.0 mm. The dynamic resolution is 0.01 %.
WayCon Positionsmesstechnik also offers customised solutions. For example, the sensor head can be adapted to the target or to the measurement conditions.
It is also possible to adjust the output signal of the evaluation electronics, so that the implementation into the customer's existing system is easy.
Technical information in the datasheet: www.waycon.biz/capacitive_sensor_datasheet.pdf
Further product information:
WayCon Positionsmesstechnik GmbH has been developing and manufacturing precision sensors for position and distance measurement since 1999. As an innovative company with headquarters in Taufkirchen near Munich and a branch in Brühl near Cologne, we sell our products all over the world. Our goal is to provide our customers with the best possible measurement technique solution: from high-quality sensors from the standard range to customer-specific solutions, from prototype to series production – for the most varied applications in industry and research. The products made in Taufkirchen are subject to rigorous quality standards and every single one is delivered to our customers with a calibration certificate.
WayCon Positionsmesstechnik GmbH
Marcus Venghaus | WayCon Positionsmesstechnik GmbH
Neutrons pave the way to accelerated production of lithium-ion cells
20.03.2018 | Technische Universität München
Monocrystalline silicon thin film for cost-cutting solar cells with 10-times faster growth rate fabricated
16.03.2018 | Tokyo Institute of Technology
Satellites in near-Earth orbit are at risk due to the steady increase in space debris. But their mission in the areas of telecommunications, navigation or weather forecasts is essential for society. Fraunhofer FHR therefore develops radar-based systems which allow the detection, tracking and cataloging of even the smallest particles of debris. Satellite operators who have access to our data are in a better position to plan evasive maneuvers and prevent destructive collisions. From April, 25-29 2018, Fraunhofer FHR and its partners will exhibit the complementary radar systems TIRA and GESTRA as well as the latest radar techniques for space observation across three stands at the ILA Berlin.
The "traffic situation" in space is very tense: the Earth is currently being orbited not only by countless satellites but also by a large volume of space...
An international team of researchers has discovered a new anti-cancer protein. The protein, called LHPP, prevents the uncontrolled proliferation of cancer cells in the liver. The researchers led by Prof. Michael N. Hall from the Biozentrum, University of Basel, report in “Nature” that LHPP can also serve as a biomarker for the diagnosis and prognosis of liver cancer.
The incidence of liver cancer, also known as hepatocellular carcinoma, is steadily increasing. In the last twenty years, the number of cases has almost doubled...
In just a few weeks from now, the Chinese space station Tiangong-1 will re-enter the Earth's atmosphere where it will to a large extent burn up. It is possible that some debris will reach the Earth's surface. Tiangong-1 is orbiting the Earth uncontrolled at a speed of approx. 29,000 km/h.Currently the prognosis relating to the time of impact currently lies within a window of several days. The scientists at Fraunhofer FHR have already been monitoring Tiangong-1 for a number of weeks with their TIRA system, one of the most powerful space observation radars in the world, with a view to supporting the German Space Situational Awareness Center and the ESA with their re-entry forecasts.
Following the loss of radio contact with Tiangong-1 in 2016 and due to the low orbital height, it is now inevitable that the Chinese space station will...
Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP, provider of research and development services for OLED lighting solutions, announces the founding of the “OLED Licht Forum” and presents latest OLED design and lighting solutions during light+building, from March 18th – 23rd, 2018 in Frankfurt a.M./Germany, at booth no. F91 in Hall 4.0.
They are united in their passion for OLED (organic light emitting diodes) lighting with all of its unique facets and application possibilities. Thus experts in...
A new scenario seeking to explain how Mars' putative oceans came and went over the last 4 billion years implies that the oceans formed several hundred million...
23.03.2018 | Event News
19.03.2018 | Event News
16.03.2018 | Event News
23.03.2018 | Materials Sciences
23.03.2018 | Agricultural and Forestry Science
23.03.2018 | Physics and Astronomy