Microstructures could have myriad uses, including batteries and ultrastrong materials
Washington State University researchers have developed a unique, 3-D manufacturing method that for the first time rapidly creates and precisely controls a material's architecture from the nanoscale to centimeters. The results closely mimic the intricate architecture of natural materials like wood and bone.
They report on their work in the journal Science Advances and have filed for a patent.
The work has many high-tech engineering applications.
"This is a groundbreaking advance in the 3-D architecturing of materials at nano- to macroscales with applications in batteries, lightweight ultrastrong materials, catalytic converters, supercapacitors and biological scaffolds," said Rahul Panat, associate professor in the School of Mechanical and Materials Engineering, who led the research. "This technique can fill a lot of critical gaps for the realization of these technologies."
The WSU research team used a 3-D printing method to create foglike microdroplets that contain nanoparticles of silver and to deposit them at specific locations. As the liquid in the fog evaporated, the nanoparticles remained, creating delicate structures. The tiny structures, which look similar to Tinkertoy constructions, are porous, have an extremely large surface area and are very strong.
Silver was used because it is easy to work with. However, Panat said, the method can be extended to any other material that can be crushed into nanoparticles -- and almost all materials can be.
The researchers created several intricate and beautiful structures, including microscaffolds that contain solid truss members like a bridge, spirals, electronic connections that resemble accordion bellows or doughnut-shaped pillars.
The manufacturing method itself is similar to a rare, natural process in which tiny fog droplets that contain sulfur evaporate over the hot western Africa deserts and give rise to crystalline flower-like structures called "desert roses."
Because it uses 3-D printing technology, the new method is highly efficient, creates minimal waste and allows for fast and large-scale manufacturing.
The researchers would like to use such nanoscale and porous metal structures for a number of industrial applications; for instance, the team is developing finely detailed, porous anodes and cathodes for batteries rather than the solid structures that are now used. This advance could transform the industry by significantly increasing battery speed and capacity and allowing the use of new and higher energy materials.
Graduate students Mohammad Sadeq Saleh and Chunshan Hu worked with Panat on the project.
The research is in keeping with WSU's Grand Challenges initiative stimulating research to address some of society's most complex issues. It is particularly relevant to the challenge of "Smart Systems" and its theme of foundational and emergent materials.
Rahul Panat | EurekAlert!
Spider silk key to new bone-fixing composite
20.04.2018 | University of Connecticut
Diamond-like carbon is formed differently to what was believed -- machine learning enables development of new model
19.04.2018 | Aalto University
Physicists at the Laboratory for Attosecond Physics, which is jointly run by Ludwig-Maximilians-Universität and the Max Planck Institute of Quantum Optics, have developed a high-power laser system that generates ultrashort pulses of light covering a large share of the mid-infrared spectrum. The researchers envisage a wide range of applications for the technology – in the early diagnosis of cancer, for instance.
Molecules are the building blocks of life. Like all other organisms, we are made of them. They control our biorhythm, and they can also reflect our state of...
University of Connecticut researchers have created a biodegradable composite made of silk fibers that can be used to repair broken load-bearing bones without the complications sometimes presented by other materials.
Repairing major load-bearing bones such as those in the leg can be a long and uncomfortable process.
Study published in the journal ACS Applied Materials & Interfaces is the outcome of an international effort that included teams from Dresden and Berlin in Germany, and the US.
Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) together with colleagues from the Helmholtz-Zentrum Berlin (HZB) and the University of Virginia...
Novel highly efficient and brilliant gamma-ray source: Based on model calculations, physicists of the Max PIanck Institute for Nuclear Physics in Heidelberg propose a novel method for an efficient high-brilliance gamma-ray source. A giant collimated gamma-ray pulse is generated from the interaction of a dense ultra-relativistic electron beam with a thin solid conductor. Energetic gamma-rays are copiously produced as the electron beam splits into filaments while propagating across the conductor. The resulting gamma-ray energy and flux enable novel experiments in nuclear and fundamental physics.
The typical wavelength of light interacting with an object of the microcosm scales with the size of this object. For atoms, this ranges from visible light to...
Stable joint cartilage can be produced from adult stem cells originating from bone marrow. This is made possible by inducing specific molecular processes occurring during embryonic cartilage formation, as researchers from the University and University Hospital of Basel report in the scientific journal PNAS.
Certain mesenchymal stem/stromal cells from the bone marrow of adults are considered extremely promising for skeletal tissue regeneration. These adult stem...
13.04.2018 | Event News
12.04.2018 | Event News
09.04.2018 | Event News
23.04.2018 | Physics and Astronomy
23.04.2018 | Physics and Astronomy
23.04.2018 | Trade Fair News