Mention vuvuzela to soccer fans, and they may cringe. The plastic horn rose to prominence during the 2010 World Cup in South Africa, where tens of thousands of those instruments blared in packed stadiums. The loud, buzzing noise soon became a major annoyance, disrupting players and even fans watching on TV.
Now, for the 2014 World Cup in Brazil, organizers have introduced the maraca-like caxirola as the official instrument of the event. The caxirola, based on the African caxixi, was invented by Brazilian musician Carlinhos Brown to be more subdued than the vuvuzela. To see if this was really the case, Talita Pozzer and Stephan Paul of the Federal University of Santa Maria in Brazil studied the acoustics of the instrument, finding that a single caxirola, at least, poses no threat to the user's ear.
Their work will be presented at the 166th meeting of the Acoustic Society of America, held Dec. 2-6, 2013, in San Francisco, Calif.
In their analysis, the researchers asked 22 volunteers who had never seen the instrument to play it as they thought it should be played, finding that people tend to either shake it along its longer axis or its shorter axis. A recording device placed at the ear of each subject measured the sound of the caxirola.
The researchers found that if shaken along the longer axis, the instrument produces twice the sound energy as when shaken along the shorter axis. But because volume depends logarithmically on the sound energy, the difference is only just noticeable to the ear. In both playing styles, the sound pressure levels were comparable to that of a normal conversation – and roughly 45 decibels lower than that of the vuvuzela, corresponding to 1/30,000th times the sound energy. In other words, you would need 30,000 caxirolas to produce the same sound pressure level as a single vuvuzela.
The researchers also captured the acoustic signature of the caxirola played in both styles, measuring how the frequency and intensity of the sound varies over time. The signature was similar in both cases.
The next step, Paul said, is to measure the caxirola's sound power levels, which, unlike sound pressure levels, are independent of distance and the instrument's surroundings. The researchers can then input those measurements into a computer model of soccer stadiums, simulating exactly what kind of noise thousands of caxirolas would make, showing whether or not it would be harmful.
Since its introduction last year, the caxirola has already been mired in controversy. After disgruntled fans hurled the instrument on the field during a match in April, officials banned the instrument for the Confederations Cup last summer. Whether the caxirola will be distributed during the 2014 World Cup has yet to be determined, Paul said.
Perhaps it's not the caxirola's acoustics that's a cause for concern – but its aerodynamics.
Presentation 4pMUa6, "A first look into the caxirola – official music instrument of the Soccer World Cup 2014," will take place on Thursday, Dec. 5, 2013, at 3:40 p.m. The abstract describing this work can be found here: http://asa2013.abstractcentral.com/planner.jsp.ABOUT THE MEETING
This news release was prepared for the Acoustical Society of America (ASA) by the American Institute of Physics (AIP).Contacts: Jason Socrates Bardi
Discovery of an Extragalactic Hot Molecular Core
29.09.2016 | National Astronomical Observatory of Japan
Swiss space research reaches for the sky
29.09.2016 | Schweizerischer Nationalfonds SNF
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research