Simple process extracts valuable magnesium salt from seawater

Researchers can isolate magnesium feedstocks from the ocean, important for renewable energy applications.
Credit: Composite image by Cortland Johnson | Pacific Northwest National Laboratory

A new flow-based method harvests a magnesium salt from Sequim seawater.

By Beth Mundy

Since ancient times, humans have extracted salts, like table salt, from the ocean. While table salt is the easiest to obtain, seawater is a rich source of different minerals, and researchers are exploring which ones they can pull from the ocean. One such mineral, magnesium, is abundant in the sea and increasingly useful on the land.

Magnesium has emerging sustainability-related applications, including in carbon capture, low-carbon cement, and potential next-generation batteries. These applications are bringing renewed attention to domestic magnesium production. Currently, magnesium is obtained in the United States through an energy-intensive process from salt lake brines, some of which are in danger due to droughts. The Department of Energy included magnesium on its recently released list of critical materials for domestic production.

A paper published in Environmental Science & Technology Letters shows how researchers at Pacific Northwest National Laboratory (PNNL) and the University of Washington (UW) have found a simple way to isolate a pure magnesium salt, a feedstock for magnesium metal, from seawater. Their new method flows two solutions side-by-side in a long stream. Called the laminar coflow method, the process takes advantage of the fact that the flowing solutions create a constantly reacting boundary. Fresh solutions flow by, never allowing the system to reach a balance.

This method plays a new trick with an old process. In the mid-20th century, chemical companies successfully created magnesium feedstock from seawater by mixing it with sodium hydroxide, commonly known as lye. The resulting magnesium hydroxide salt, which gives the antacid milk of magnesia its name, was then processed to make magnesium metal. However, the process results in a complex mixture of magnesium and calcium salts, which are hard and costly to separate. This recent work produces pure magnesium salt, enabling more efficient processing.

“Normally, people move separations research forward by developing more complicated materials,” said PNNL chemist and UW Affiliate Professor of Materials Science and Engineering Chinmayee Subban. “This work is so exciting because we’re taking a completely different approach. We found a simple process that works. When scaled, this process could help drive the renaissance of U.S. magnesium production by generating primary feedstock. We’re surrounded by a huge, blue, untapped resource.”

From Sequim water to solid salt

Subban and the team tested their new method using seawater from the PNNL-Sequim campus, allowing the researchers to take advantage of PNNL facilities across Washington State.

“As a Coastal Sciences staff member, I just called a member of our Sequim chemistry team and requested a seawater sample,” said Subban. “The next day, we had a cooler delivered to our lab in Seattle. Inside, we found cold packs and a bottle of chilled Sequim seawater.” This work represents the collaboration that can happen across PNNL’s Richland, Seattle, and Sequim campuses.

In the laminar coflow method, the researchers flow seawater alongside a solution with hydroxide. The magnesium-containing seawater quickly reacts to form a layer of solid magnesium hydroxide. This thin layer acts as a barrier to solution mixing.

“The flow process produces dramatically different results than simple solution mixing,” said PNNL postdoctoral researcher Qingpu Wang. “The initial solid magnesium hydroxide barrier prevents calcium from interacting with the hydroxide. We can selectively produce pure solid magnesium hydroxide without needing additional purification steps.”

The selectivity of this process makes it particularly powerful. Generating pure magnesium hydroxide, without any calcium contamination, allows researchers to skip energy-intensive and expensive purification steps.

Sustainability for the future

The new and gentle process has the potential to be highly sustainable. For example, the sodium hydroxide used to extract the magnesium salt can be generated on site using seawater and marine renewable energy. Removing magnesium is a necessary pre-treatment for seawater desalination. Coupling the new process with existing technologies could make it easier and cheaper to turn seawater into freshwater.

The team is particularly excited about the future of the process. Their work is the first demonstration of the laminar coflow method for selective separations. This new approach has many additional potential applications, but more work needs to be done to understand the underlying chemistry of the process. The knowledge gap offers new possibilities and research directions for powering the blue economy.

“We want to take this work from the empirical to the predictive,” said PNNL materials scientist Elias Nakouzi. “There is an exciting opportunity to develop a fundamental understanding of how this process operates while applying it to important problems like creating new energy materials and achieving selective separation of hard-to-separate ions for water treatment and resource recovery.”

The published study was supported by the PNNL Laboratory Directed Research and Development program. Elisabeth Ryan of UW was also a co-author of the study. Current development of this technology is supported by the Department of Energy, Office of Energy Efficiency and Renewable Energy, Water Power Technologies Office under the Marine Energy Seedlings Program.

About PNNL

Pacific Northwest National Laboratory draws on its distinguishing strengths in chemistry, Earth sciences, biology and data science to advance scientific knowledge and address challenges in sustainable energy and national security. Founded in 1965, PNNL is operated by Battelle for the Department of Energy’s Office of Science, which is the single largest supporter of basic research in the physical sciences in the United States. DOE’s Office of Science is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science. For more information on PNNL, visit PNNL’s News Center. Follow us on Twitter, Facebook, LinkedIn and Instagram.

Journal: Environmental Science & Technology Letters
DOI: 10.1021/acs.estlett.2c00229
Article Publication Date: 31-May-2022

Media Contact

Greg Koller
DOE/Pacific Northwest National Laboratory
greg.koller@pnnl.gov
Office: 509-372-4864

Media Contact

Greg Koller
DOE/Pacific Northwest National Laboratory

All latest news from the category: Process Engineering

This special field revolves around processes for modifying material properties (milling, cooling), composition (filtration, distillation) and type (oxidation, hydration).

Valuable information is available on a broad range of technologies including material separation, laser processes, measuring techniques and robot engineering in addition to testing methods and coating and materials analysis processes.

Back to home

Comments (0)

Write a comment

Newest articles

How lymph nodes are supplied with blood

When our immune system runs it sets in motion antibodies, white blood cells and phagocytes. But how this works is not yet understood in all details – specifically, in the…

Programmable laser beams save more than 30 percent energy

There is a new quality in laser material processing: With a liquid crystal modulator, the beam profile of a laser can be freely programmed with high temporal resolution, but also…

Proteins from Pastures: Success for initial feed trials

The University of Hohenheim taps into a new source of protein: an on-farm biorefinery produces protein-based feed for pigs and poultry, other high-quality raw materials, and energy. A tasty dish…

Partners & Sponsors