Record-breaking laser pulses

A peek inside the record-breaking laser. The image shows the round amplifier disk, through which the laser beam passes several times (bright spot at the centre). (Image: Moritz Seidel / ETH Zurich)

Researchers at ETH Zurich have developed a laser that produces the strongest ultra-short laser pulses to date. In the future, such high power pulses could be used for precision measurements or materials processing.

In brief

  • Researchers have developed a laser that can produce extremely short pulses with peak powers up to 100 megawatts and 550 watts of average power.
  • This was made possible by an optimized arrangement of the mirrors in the laser and improvements of a special mirror, which causes the laser to emit pulses.
  • In the future, the record-breaking laser pulses could, for example, be used for precision measurements.

The word laser usually conjures up an image of a strongly concentrated and continuous light beam. Lasers that produce such light are, in fact, very common and useful. However, science and industry often also require very short and strong pulses of laser light. These pulses can be used to machine materials or to create high harmonic frequencies up to X-rays, which can help to make extremely fast processes in the attosecond range (a billionth of a billionth of a second) visible.

A team of researchers at ETH Zurich led by Ursula Keller, professor at the Institute for Quantum Electronics, have now set a new record for such laser pulses: at 550 watts of average power they surpass the previous maximum by more than 50 percent, which makes them the strongest pulses ever created by a laser oscillator. At the same time, they are extremely short – they last less than a picosecond, or a millionth of a millionth of a second – and exit the laser in a regular sequence at a high rate of five million pulses per second. The short pulses reach peak powers of 100 megawatts (which, in theory, would be enough to power 100.000 vacuum cleaners for a short time). The researchers recently published their results in the scientific journal Optica.

Portrait Ursula Keller
“This record is the result of a long an exciting journey with lots of interesting laser physics.” Foto: Ursula Keller

For the past 25 years, Keller’s research group has been working on the continuous improvement of so-called short pulsed disk lasers, in which the laser material consists of a thin disk, only 100 micrometers thick, of a crystal containing ytterbium atoms.

Over and over again, Keller and her coworkers encountered new problems that initially impeded a further increase in power. Quite often, spectacular incidents happened in which different parts inside the laser were destroyed. Solving the problems led to new insights that made short pulsed lasers, which are also popular in industrial applications, more reliable.

“The combination of even higher power and pulse rates of 5.5 megahertz, which we have now achieved, is based on two innovations”, explains Moritz Seidel, a PhD student in Keller’s laboratory. For one thing, he and his colleagues used a special arrangement of mirrors that send the light inside the laser through the disk several times before it leaves the laser through an outcoupling mirror. “This arrangement allows us to amplify the light extremely without the laser becoming instable”, says Seidel.

The second innovation regards the centrepiece of the pulsed laser: a special mirror made of semiconductor material, which was invented by Keller already thirty years ago and goes by the memorable abbreviation SESAM (Semiconductor Saturable Absorber Mirror). Unlike normal mirrors, the reflectivity of a SESAM depends on the strength of the light hitting it.

Apparatus on a metal table, in the centre of the picture a round violet dot representing the laser.An overview of the entire system: The laser can be seen in the centre of the image, with lenses and mirrors in the foreground that reflect and redirect the laser beam. (Image: Moritz Seidel / ETH Zürich)

Pulses thanks to SESAM

Using the SESAM, the researchers coax their laser into sending out short pulses rather than a continuous beam. Pulses have a higher intensity because the light energy is concentrated in a shorter period of time. For a laser to send out laser light at all, the light intensity inside it has to exceed a certain threshold value. This is where the SESAM comes into play: it reflects the light, which has already passed through the amplifying disk several times, particularly efficiently if the light intensity is high. As a result, the laser automatically goes into pulsed mode.

“Pulses with powers comparable to the ones we have now achieved could, up to now, only be achieved by sending weaker laser pulses through several separate amplifiers outside the laser”, says Seidel. The disadvantage of this is that the amplification also leads to more noise, corresponding to fluctuations in the power, which causes problems particularly in precision measurements. To create the high power directly using the laser oscillator, the researchers had to solve a number of tricky technical problems – for instance, how to attach to the semiconductor layer of the SESAM mirror a thin sapphire window, which strongly improves the properties of the mirror. “When it finally worked and we watched how the laser created pulses – that was really cool”, says Seidel.

Lukas Lang (left) and Moritz Seidl (right) in protective suits at work.Lukas Lang (left) and Moritz Seidl (right) setting up the laser. (Image: Heidi Hofstetter / ETH Zurich)

Alternative to amplifiers

Ursula Keller is also thrilled by these results and emphasizes: “The support by ETH Zurich over the years and the reliable funding of my research by the Swiss National Fund have helped me and my collaborators reach this great outcome. We now also expect to be able to shorten these pulses very efficiently to the regime of a few cycles, which is very important for creating attosecond pulses.”

According to Keller, the fast and strong pulses made possible by the new laser could also see applications in new so-called frequency combs in the ultraviolet to X-ray regime, which could lead to even more precise clocks. “A dream would be to show, one day, that the natural constants aren’t constant after all”, says Keller. Also, terahertz radiation, which has a much longer wavelength than visible or infrared light, can be created with the laser and then used, for example, to test materials. “All in all, one can say that with our pulses lasers we have shown that laser oscillators are a good alternative to amplifier-based laser systems and that they enable new and better measurement”, Keller summarizes.

Reference

Seidel M, Lang L, Phillips CR, Keller U. Ultrafast 550-W average-power thin-disk laser oscillator, Optica 11, 1368-1375 (2024) doi: external page 10.1364/OPTICA.529185

https://ethz.ch/en/news-and-events/eth-news/news/2024/10/record-breaking-laser-pulses.html

Media Contact

Peter Rüegg Hochschulkommunikation
Eidgenössische Technische Hochschule Zürich (ETH Zürich)

All latest news from the category: Physics and Astronomy

This area deals with the fundamental laws and building blocks of nature and how they interact, the properties and the behavior of matter, and research into space and time and their structures.

innovations-report provides in-depth reports and articles on subjects such as astrophysics, laser technologies, nuclear, quantum, particle and solid-state physics, nanotechnologies, planetary research and findings (Mars, Venus) and developments related to the Hubble Telescope.

Back to home

Comments (0)

Write a comment

Newest articles

New material to make next generation of electronics faster and more efficient

With the increase of new technology and artificial intelligence, the demand for efficient and powerful semiconductors continues to grow. Researchers at the University of Minnesota have achieved a new material…

Chalk-coated textiles cool in urban environments

As air temperatures stay elevated through fall months, people may still want clothes that cool them down while outside, especially if they live in cities that stay warmer than rural…

Key pathway leading to neurodegeneration in early stages of ALS identified

Findings point to potential for short-circuiting the progression of the fatal disease if diagnosed early. Approximately 5,000 people in the U.S. develop amyotrophic lateral sclerosis (ALS) each year. On average,…