A new spin on MRI

University of Tsukuba researchers have demonstrated a proof-of-concept modification to enable standard MRI systems to detect frequencies associated with the presence of sodium-23 ions. This low-cost and convenient approach requires the installation of a radio-frequency repeater inside the magnetic bore of an MRI machine. The wide applicability of this method for sodium and other nuclei may allow advanced medical imaging to be performed on existing machines, and substantially reduce MRI scanner upgrade costs for hospitals.
Credit: University of Tsukuba

Researchers at the University of Tsukuba place a radio-frequency repeater inside an MRI machine that allows it to detect sodium ions, which may lead to enhanced clinical imaging and monitoring functionality at very low cost.

Scientists at the University of Tsukuba demonstrated how conventional magnetic resonance imaging (MRI) machines can be retrofitted to detect sodium ions using a cross band radio-frequency repeater. This work may allow for new medical diagnostics to be performed without expensive new equipment.

Magnetic resonance imaging has become a crucial part of the medical toolkit for non-invasive visualization of internal organs. MRI machines operate by placing the patient in a very strong magnetic field, which will cause the nuclear spins of atoms in the body to align in the same direction, essentially acting like tiny magnets. Then, a radio-frequency (RF) signal of a very specific frequency is applied, which has the ability to flip the direction of the spins. When the nuclei relax back to their original aligned state, the precession of these spins about the magnet field direction can be measured by RF detector coils to determine the concentration of that particular atom. The majority of MRI machines in use today are optimized to look for the presence of hydrogen (1H) nuclei, which are naturally abundant in the body as a component of water molecules. Retrofitting such a machine for detecting other isotopes, like sodium-23 23Na, would require a great deal of expensive hardware upgrades.

Now, a team of researchers at the University of Tsukuba have demonstrated a proof-of-concept method for equipping a conventional MRI machine with the capability to image 23Na by installing a cross band RF repeater system. This is a device that receives signals at a certain frequency and rebroadcast at a different one. “The RF repeater, which is a commonly used device in amateur radio, can be placed directly inside the magnet bore of an existing MRI machine as a cost-effective upgrade,” explains author Professor Yasuhiko Terada. This allows the frequency produced by 23Na, which is around 17 MHz, to be detected by the coils tuned at the 64 MHz of MRI.

The research team tested the system with a saline “phantom” and an anesthetized mouse. Even though the resulting signal was much lower compared with custom-built 23Na machines, it could be amplified to produce comparable images. “Watching the motion of sodium ions inside the body provides detailed metabolic information not available from conventional MRI images,” Professor Terada says. 23Na imaging has already been shown to be useful for applications involving the kidney, owing to its large sodium concentration, as well as the brain and heart. This approach may substantially reduce health care costs by providing completely new abilities to existing machines without requiring a complete refurbishment.

The work is published in Magnetic Resonance in Medical Sciences as “Development of an add-on 23Na-MRI radiofrequency platform for a 1H-MRI system using a crossband repeater: proof-of-concept” (DOI:10.2463/mrms.tn.2021-0094).

Funding: This research was supported by the Japan Agency for Medical Research and Development AMED (Grant Number JP20hm0102062)

DOI: 10.2463/mrms.tn.2021-0094
Article Title: Development of an add-on 23Na-MRI radiofrequency platform for a 1H-MRI system using a crossband repeater: proof-of-concept

Media Contact

Naoko Yamashina
University of Tsukuba
kohositu@un.tsukuba.ac.jp

Media Contact

Naoko Yamashina
University of Tsukuba

All latest news from the category: Medical Engineering

The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.

innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.

Back to home

Comments (0)

Write a comment

Newest articles

New, highly efficient catalyst for propylene production

Researchers have developed an innovative catalyst for the synthesis of propylene, which has potential benefits for the chemical industry and carbon recycling. Propylene is a colourless, flammable hydrocarbon gas that…

A mathematical secret of lizard camouflage

A multidisciplinary team at the UNIGE has succeeded in explaining the complex distribution of scales in the ocellated lizard by means of a simple equation. The shape-shifting clouds of starling…

Revolutionize satellite power using laser beaming

The University of Surrey and Space Power are tackling the problem of powering satellites in Low Earth Orbit (LEO) during their eclipse period when they cannot see the sun. By…

Partners & Sponsors