A contact lens for the ear

The hearing contact lens® and the auditory canal module are connected to a sound processor that is worn behind the ear. The behind-the-ear module incorporates the signal processing electronics and the battery, and can be removed. The auditory canal module and hearing contact lens® remain secure-ly in place inside the ear.
© Vibrosonic GmbH

Excessive noise, hearing loss, vascular constriction, old age – hearing difficulties can be caused by many factors. To help improve the quality of life of people with hearing impairment, Mannheim start-up Vibrosonic have developed a new, innovative hearing aid with an integrated loudspeaker that sits directly on the eardrum. This hearing contact lens® is not an implant, and the sound quality it delivers outperforms other hearing systems currently on the market. Vibrosonic is a spin-off company of the University of Tübingen’s ENT clinic and the Fraunhofer Institute for Manufacturing Engineering and Automation IPA through its Project Group for Automation in Medicine and Biotechnology PAMB.

According to the German association for the hearing impaired – Deutscher Schwerhörigenbund e.V – some 15 million Germans are hard of hearing. In many cases, hearing aids can improve hearing ability and simplify the day-to-day lives of those affected. With most standard hearing devices, the loudspeaker sits inside the wearer’s ear canal. This produces acoustic distortions that can impair sound quality. The microphone is positioned behind the ear where it is susceptible to noise interference such as wind. With its innovative hearing solution, Mannheim start-up Vibrosonic are set on resolving these challenges. The company was founded in 2016 by Dr. Dominik Kaltenbacher and Dr. Jonathan Schächtele – former research scientists at the Fraunhofer Project Group PAMB – and Dr. Ernst Dalhoff from the University of Tübingen ENT clinic. Five years on, Vibrosonic employs a staff of 27 today.

Based on their innovative hearing contact lens®, Vibrosonic’s hearing solutions amplify sound within the 80 Hz to 12 kHz frequency range

No bigger than a button: the hearing contact lens® is the heart of the Vibrosonic alpha’s hearing technology.
© Vibrosonic GmbH

Vibrosonic alpha, the spin-off’s first CE-certified hearing solution, consists of three components: the hearing contact lens®, an auditory canal module and a behind-the-ear module. The hearing contact lens® and auditory canal module remain securely inside the auditory canal; the behind-the-ear module can be removed. With the hearing contact lens®, rather than just sitting inside the auditory canal, the loudspeaker is positioned right onto the eardrum. It transmits vibrations to the ossicle directly, with no interference from airborne noise. Sound is transmitted through direct mechanical stimulation of the ear. This helps reproduce the natural hearing process very effectively.

The hearing contact lens®, loudspeaker and one of the three components of Vibrosonic alpha, is capable of amplifying sounds across the complete audible frequency spectrum, ranging from under 80 Hz to 12 kHz. Conventional systems are not able to do this.

Because of differences in the shape of every eardrum, the hearing contact lens® is specifically manufactured for each patient individually. In this process, the Vibrosonic actuator — a piezoelectric micro-loudspeaker — is integrated into a silicon mold. “Because our hearing contact lens® is worn directly on the eardrum — just like a contact lens on your eye — very low and particularly high tones can be amplified very effectively, while the lens’ principle prevents disruptive noises caused by feedback. For example low tones are crucial when listening to music, because they make the sound richer. The ability to hear high tones properly is important for speech comprehension, as the coded overtones shape the character of the voice,” Vibrosonic CEO Dr. Dominik Kaltenbacher explains.

Actuator structures one thousand times smaller than a human hair

With severe hearing loss or extreme miniaturization, conventional hearing aids reach their limits due to feedback and distortion effect – a result of the performance limitations of the coil-based loudspeakers that have been used up to now. “Our hearing contact lens® uses the world’s first hearing device loudspeaker to have been consistently developed and manufactured based on microsystems engineering methods – the Vibrosonic actuator. The individual structures within the Vibrosonic actuator are a thousand times smaller that the width of a human hair. Despite its very small size, it delivers extraordinary hearing performance,” Kaltenbacher explains.

A hearing system for patients with mild to moderately severe hearing loss

Initial studies with a small number of participants have shown that the Vibrosonic alpha can improve the hearing experience of people with mild to moderate hearing impairment. The system is suitable for patients over 18 years of age and can be worn on one or both ears, depending on the degree of hearing loss. However, there are plans to reduce the size of the hearing system’s current components, such that they fit discretely deep inside the ear channel, where they are invisible from the outside.

Weitere Informationen:

https://www.fraunhofer.de/en/press/research-news/2021/july-2021/a-contact-lens-f…

Media Contact

Joerg-Dieter Walz Press communication
Fraunhofer Institute for Manufacturing Engineering and Automation IPA

All latest news from the category: Medical Engineering

The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.

innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.

Back to home

Comments (0)

Write a comment

Newest articles

Properties of new materials for microchips

… can now be measured well. Reseachers of Delft University of Technology demonstrated measuring performance properties of ultrathin silicon membranes. Making ever smaller and more powerful chips requires new ultrathin…

Floating solar’s potential

… to support sustainable development by addressing climate, water, and energy goals holistically. A new study published this week in Nature Energy raises the potential for floating solar photovoltaics (FPV)…

Skyrmions move at record speeds

… a step towards the computing of the future. An international research team led by scientists from the CNRS1 has discovered that the magnetic nanobubbles2 known as skyrmions can be…

Partners & Sponsors