A new “digital twin” of laser-directed energy deposition repair technology

The research team demonstrated that LDED is superior to other repair methods in terms of interfacial strength and mechanical properties.
Credit: Masayuki Arai from Tokyo University of Science

Researchers develop a numerical processing analysis system that automatically determines optimum forming conditions.

Mechanical parts in industrial machinery and structures that develop thinning or cracks need to be replaced with new ones. In recent years, attempts to repair them have been considered, in order to improve industrial sustainability. So, repair technology for machines has been a hot topic of research and development. Conventional metal 3D-printed fabrication uses the surface of a mechanically laid powder bed that is irradiated with a laser or electron beam to melt the metal particles and fuse them. However, this method requires bulky fabrication equipment. Also, a large amount of metal powder is disposed after the fabrication process. However, laser-directed energy deposition (LDED) is a promising technology that overcomes the challenges. In this technique, metal powders are deposited at the focus of a laser beam, then melted and stacked.

The advantages of LDED are not only related to the compactness of the equipment, but also the significant reduction of metal powder waste. Furthermore, this technology enables in-situ metal powder fabrication in a 3D shape on the surface of a substrate. This means it can be used to repair machines made of metal as well!

A group of researchers, which include Professor Masayuki Arai from the Department of Mechanical Engineering, Faculty of Engineering, Tokyo University of Science (TUS), Japan, Mr. Toshikazu Muramatsu, also from TUS, and Dr. Kiyohiro Ito from Department of Mechanical and Electrical Engineering, Suwa University of Science, Japan, has, in collaboration with the Thermal Spray Technology Development Laboratory of TOCALO Co. Ltd., Japan, developed a repair technique using LDED. “Using our technique, the surface shape of a metal structure can be completely restored on-site, and the disposal of the metal powder required for repair can be significantly reduced. However, the optimum forming conditions required for the widespread application of this technology in industry had to be hitherto determined by a trial-and-error process,” explains Prof. Arai, who has been actively involved in the research of damage mechanics and repair technology.

In a recent article published in Journal of Thermal Spray Technology on November 23, 2022, the researchers have devised a mathematical model of LDED that automatically generates a metal powder deposition region using a death-birth algorithm, eliminating the guesswork needed to optimize the production. “The thermal radiation-thermal conduction model and the viscoplastic-thermoplastic constitutive model are applied to the stacked elements that constitute the deposited region, so that a wide range of state changes from melting to solidification of the deposited layer of metal powder can be faithfully simulated. By incorporating these models into a finite element analysis program, we have developed a new machining analysis system that has never been used before”, notes Prof. Arai. The team numerically simulated the restoration process, and thus, predicted the forming process conditions, temperature distribution, deformation state, and residual stress distribution in advance and verified the findings through experiments.  They found that the residual stresses in the deposited layer were much lower than those obtained via conventional repair processes.

This novel 3D machining numerical analysis system is a digital twin of the existing core machining technology based on the fusion of metal in the area to be repaired. The numerical analysis method developed here could be applied to various industrial applications in the future, such as planning the repair of cavitation thinning on the surface of a blade used in power plant’s circulating pump and devising a method for reducing residual deformation after repairing the thinning of the tip of a gas turbine’s rotor blade. Taken together, the features of automation and advance prediction of process conditions by the numerical machining analysis system make 3D metal layered metal fabrication by LDED repair technology more effective, with efficient resource management to improve its sustainability.

Reference                     

DOI: https://doi.org/10.1007/s11666-022-01499-6

 

About The Tokyo University of Science

Tokyo University of Science (TUS) is a well-known and respected university, and the largest science-specialized private research university in Japan, with four campuses in central Tokyo and its suburbs and in Hokkaido. Established in 1881, the university has continually contributed to Japan’s development in science through inculcating the love for science in researchers, technicians, and educators.

With a mission of “Creating science and technology for the harmonious development of nature, human beings, and society”, TUS has undertaken a wide range of research from basic to applied science. TUS has embraced a multidisciplinary approach to research and undertaken intensive study in some of today’s most vital fields. TUS is a meritocracy where the best in science is recognized and nurtured. It is the only private university in Japan that has produced a Nobel Prize winner and the only private university in Asia to produce Nobel Prize winners within the natural sciences field.

Website: https://www.tus.ac.jp/en/mediarelations/

 

About Professor Masayuki Arai from Tokyo University of Science

Dr. Masayuki Arai is a Professor of Mechanical Engineering at the Faculty of Engineering, Tokyo University of Science (TUS), Japan. His research focuses on materials/mechanics of materials (Solid Mechanics, Damage Mechanics, Interface Mechanics). He earned his Ph.D. from Tokyo Institute of Technology. He has authored over 150 refereed papers, over 300 conference presentations and has 3 patents to his credit. He has served as a guest editor, associate editor in the editorial boards of several reputed journals. He has also served in the scientific committee of Asia-Pacific Conference on Fracture and Strength (2018), the Japan Society of Mechanical Engineers (2016-2017).

Journal: Journal of Thermal Spray Technology
DOI: 10.1007/s11666-022-01499-6
Method of Research: Computational simulation/modeling
Subject of Research: Not applicable
Article Title: Three-Dimensional Numerical Simulation of Repairing Process by Laser Direct Energy Deposition
Article Publication Date: 23-Nov-2022
COI Statement: No conflicts of interest to declare.

Media Contact

Hiroshi Matsuda
Public Relations Division, Tokyo University of Science
mediaoffice@admin.tus.ac.jp

Media Contact

Hiroshi Matsuda
Public Relations Division, Tokyo University of Science

All latest news from the category: Machine Engineering

Machine engineering is one of Germany’s key industries. The importance of this segment has led to the creation of new university degree programs in fields such as production and logistics, process engineering, vehicle/automotive engineering, production engineering and aerospace engineering among others.

innovations-report offers informative reports and articles covering technologies such as automation, motion, power train, energy, conveyor, plastics, lightweight construction, logistics/warehousing, measurement systems, machine tools and control engineering.

Back to home

Comments (0)

Write a comment

Newest articles

It takes two: cooperating catalysts provide new route for utilizing formate salts

Two catalysts working in tandem enable inexpensive formate salts to perform difficult dearomative reactions, giving products potentially useful for drug development. Researchers at the Institute for Chemical Reaction Design and…

Molecule-electron-proton transfer in enzyme-photo-coupled catalytic system

The harmonious coexistence between the human society and the nature has prompted the rapid development of advanced manufacturing. Typically, green biomanufacturing, which uses renewable resources as raw materials and enzymes…

Funding backs world-first test to detect ‘insidious’ malaria infections

Research to develop and deploy a world-first diagnostic test that could accelerate malaria eradication has been bolstered with over $1.3 million in new funding from the National Health and Medical…

Partners & Sponsors