Shifting colors for on-chip photonics

In the top device, two coupled resonators form a figure eight-like structure. Input light travels from the waveguide through the resonators, entering as one color and emerging as another. The bottom device uses three coupled resonators: a small ring resonator, a long oval resonator called a racetrack resonator, and a rectangular-shaped resonator. As light speeds around the racetrack resonator, it cascades into higher and higher frequencies, resulting in a shift as high as 120 gigahertz. (Credit: Second Bay Studios/Harvard SEAS)

On-chip frequency shifters in the gigahertz range could be used in next generation quantum computers and networks.

The ability to precisely control and change properties of a photon, including polarization, position in space, and arrival time, gave rise to a wide range of communication technologies we use today, including the Internet. The next generation of photonic technologies, such as photonic quantum networks and computers, will require even more control over the properties of a photon.

One of the hardest properties to change is a photon’s color, otherwise known as its frequency, because changing the frequency of a photon means changing its energy.

Today, most frequency shifters are either too inefficient, losing a lot of light in the conversion process, or they can’t convert light in the gigahertz range, which is where the most important frequencies for communications, computing, and other applications are found.

Now, researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have developed highly efficient, on-chip frequency shifters that can convert light in the gigahertz frequency range. The frequency shifters are easily controlled, using continuous and single-tone microwaves.

The research is published in Nature.

“Our frequency shifters could become a fundamental building block for high-speed, large-scale classical communication systems as well as emerging photonic quantum computers,” said Marko Lončar, the Tiantsai Lin Professor of Electrical Engineering and senior author of the paper.

The paper outlines two types of on-chip frequency shifter — one that can covert one color to another, using a shift of a few dozen gigahertz, and another that can cascade multiple shifts, a shift of more than 100 gigahertz.

Each device is built on the lithium niobate platform pioneered by Lončar and his lab.

Lithium niobate can efficiently convert electronic signals into optical signal but was long considered by many in the field to be difficult to work with on small scales. In previous research, Lončar and his team demonstrated a technique to fabricate high-performance lithium niobate microstructures using standard plasma etching to physically sculpt microresonators in thin lithium niobate films.

Here, using the same technique, Lončar and his team etched coupled ring-resonators and waveguides on thin-film lithium niobate. In the first device, two coupled resonators form a figure eight-like structure. Input light travels from the waveguide through the resonators in a figure eight pattern, entering as one color and emerging as another. This device provides frequency shifts as high as 28 gigahertz with about 90% efficiency. It can also be reconfigured as tunable frequency-domain beam splitters, where a beam of one frequency gets split into two beams of another frequency.

The second device uses three coupled resonators: a small ring resonator, a long oval resonator called a racetrack resonator, and a rectangular-shaped resonator. As light speeds around the racetrack resonator, it cascades into higher and higher frequencies, resulting in a shift as high as 120 gigahertz.

“We are able to achieve this magnitude of frequency shift using only a single, 30-gigahertz microwave signal,” said Yaowen Hu, a research assistant at SEAS and first author of the paper. “This is a completely new type of photonic device. Previous attempts to shift frequencies by amounts larger than 100 gigahertz have been very hard and expensive, requiring an equally large microwave signal.”

“This work is made possible by all of our previous developments in integrated lithium niobate photonics,” said Lončar. “The ability to process information in the frequency domain in an efficient, compact, and scalable fashion has the potential to significantly reduce the expense and resource requirements for large-scale photonic circuits, including quantum computing, telecommunications, radar, optical signal processing and spectroscopy.”

Harvard’s Office of Technology Development has protected the intellectual property associated with this project and is pursuing commercialization opportunities.

The research is co-authored by Mengjie Yu, Di Zhu, Neil Sinclair, Amirhassan Shams-Ansari, Linbo Shao, Jeffrey Holzgrafe, Eric Puma and Mian Zhang. It was supported in part by the US Office of Naval Research under grant QOMAND N00014-15-1-2761, the Air Force Office of Scientific Research under grants FA9550‐19‐1‐0310 and FA9550-20-1-0105, the National Science Foundation, under grants ECCS-1839197, ECCS-1541959, PFI-TT IIP-1827720, Army Research Office under grants W911NF2010248, and Department of Energy under grants HEADS-QON DE-SC0020376.

Media Contact

Leah Burrows
Harvard John A. Paulson School of Engineering and Applied Sciences
lburrows@seas.harvard.edu
Office: 617-496-1351

Journal: Nature
DOI: 10.1038/s41586-021-03999-x

Shifting colors for on-chip photonics (harvard.edu)

Media Contact

Leah Burrows
Harvard John A. Paulson School of Engineering and Applied Sciences

All latest news from the category: Information Technology

Here you can find a summary of innovations in the fields of information and data processing and up-to-date developments on IT equipment and hardware.

This area covers topics such as IT services, IT architectures, IT management and telecommunications.

Back to home

Comments (0)

Write a comment

Newest articles

Researchers shrink camera to the size of a salt grain

Micro-sized cameras have great potential to spot problems in the human body and enable sensing for super-small robots, but past approaches captured fuzzy, distorted images with limited fields of view….

World-first product will be a lifesaving traffic stopper

Game-changing technology to design traffic lights that absorb kinetic energy, stopping them from crumpling when hit by a vehicle, will prevent thousands of fatalities and injuries each year and make…

Scientists capture electron transfer image in electrocatalysis process

The involvement between electron transfer (ET) and catalytic reaction at electrocatalyst surface makes electrochemical process challenging to understand and control. How to experimentally determine ET process occurring at nanoscale is…

Partners & Sponsors