Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Radar Sensors Increase Efficiency of Production and Automation

19.03.2019

Sensors allow the automation of production and logistic processes and are consequently the foundation for effective added value. Yet, their advantages are evident: Compared to optical sensors, radar systems are unaffected by challenging visual conditions and, opposed to X-rays, they pose no threat to health. The Fraunhofer Institute for Applied Solid State Physics IAF develops compact and high-resolution radar systems, which can significantly increase the efficiency of different industrial processes. The newest technologies will be shown at Hannover Fair 2019 (Hall 2, Booth C22), from April 1-5.

The radar systems developed at Fraunhofer IAF work in the millimeter-wave range and are able to penetrate most non-metallic materials such as plastic, cardboard, wood, textiles or even dust, smoke and fog. They are able to precisely measure distances, spacings and speeds, even if the objects are barely visible or concealed.


The compact W-band radar is able to precisly measure positions, spacings, distances and velocities, even if the objects are barely visible or concealed.

Fraunhofer IAF

The scientists of Fraunhofer IAF utilize these properties of millimeter-waves to develop high-resolution radar modules for industrial sensor systems.

At this year’s Hannover Fair Fraunhofer IAF presents its compact W-band radar (75-110 GHz) which is able to inspect packaged goods for content and completeness remotely and in real-time. In this way, it can sort out faulty deliveries of goods before shipping and thereby minimize return flows.

Extremely precise even under challenging visual conditions

So far, mostly optical sensors, like lasers, are being used for presence detection during production processes. The challenge here is that lasers do not work under conditions of poor visibility and are not able to measure through optical barriers.

The W-band radar, however, offers extremely precise distance measurement no matter the visibility condition and with a sub-millimeter accuracy. On top of presence detection, radar technology developed at Fraunhofer IAF offers a wide range of applications:

»Our radar sensors can be used wherever contact-free material inspection or highly precise distance measurement under difficult conditions such as heat or restricted vision is needed«, explains Christian Zech, scientist at Fraunhofer IAF. Currently, Freiburg’s Fraunhofer institute is working on multiple projects to adapt its radar technology for specific industrial requirements.

Safer human-robot collaboration

Zech’s project team adapts the radar for human-robot collaboration, which will help to improve the safety of people. Humans and robots will be expected to increasingly interact directly with each other in confined spaces of production environments in the future. Safety systems are required to ensure the safety of people at all time.

At the same time, a relatively uninterrupted movement of the robot must be ensured for maximum efficiency. Thus, the scientists work on a novel solution for the safety of people based on compact high-resolution radar systems that surveil the collaboration space, calculate dynamic safety zones and situationally adjust the speed and movement of the robots.

By these means a robot is able to adjust its own movement according to human actions without interrupting its task, and therefore, guarantees a safe and efficient collaboration. »Such a radar safety system can utilize the maximum possible movement speed at minimal distance. This leads to a faster, and thus more efficient, collaboration between humans and robots«, sums up Christian Zech, project manager of »RoKoRa«.

More information on project »RoKoRa«:
https://www.iaf.fraunhofer.de/en/researchers/electronic-circuits/high-frequency-...

Saving energy in the iron and steel industry

The steel industry is one of the most energy-intensive sectors. Thermoprocessing plants and industrial furnaces consume almost 40 % of the overall industrial energy demand. In order to remain internationally competitive, the steel industry needs to increase the efficiency of existing production plants and substantially lower the energy consumption.

For this purpose, a multi-disciplinary consortium including Fraunhofer IAF develops a radar-based measuring technology for hot rolling mills: This radar sensor technology not only allows for a resilient high-resolution detection of distances and positions of flat steel, but also for precise and contact-free measurements of lengths and speeds.

»Rough conditions dominate hot rolling mills – extremely high temperatures, dust, high humidity and steam complicate the use of optical measuring systems. High-resolution radar sensors control precise band and process sizes and thus ensure a reduction of defective goods, which corresponds to increased profit. This saves resources and energy«, explains Benjamin Baumann, project manager of »Rad-Energy« on the part of Fraunhofer IAF.

More information on project »RAD-Energy«: https://www.iaf.fraunhofer.de/en/researchers/electronic-circuits/high-frequency-...

Longer-lasting wind turbines

Millimeter-wave radar technology can not only determine dimensions of materials, but even penetrate them, for example to locate defects and their exact positions within materials. The scientists of project »InFaRo« develop an innovative testing method for wind turbine rotor blades that is able to detect defects as early as during production. This increases their quality significantly and also saves production and operating costs.
The production, assembly and operation of wind turbines is being refined each generation.

The rotor blades made of fibrous composite materials in sandwich design, constructed as hollow parts, are required to withstand extreme forces during operation. The increase in size of rotor blades from 40 m (2006) to over 80m (2014) leads to ever increasing demands on their manufacturing. Cracks and fractures in blades result in massive material damage and inefficient power plants and even pose a threat to life.

»We develop an innovative measuring system based on radar and thermography, to detect even smallest material defects such as delamination, folding or air inclusions during production. This ensures an increase in safety and efficiency of wind turbines, while at the same time lowering their cost«, says Dominik Meier, project manager and scientist at Fraunhofer IAF. Direct material inspection has several benefits: The quality of the rotor blades increases substantially, wind turbines become more durable and downtimes due to defects can be reduced to a minimum.

More information on project »InFaRo«: https://www.iaf.fraunhofer.de/en/researchers/electronic-circuits/high-frequency-...

Originalpublikation:

https://www.iaf.fraunhofer.de/en/media-library/press-releases/HannoverMesse2019....

Weitere Informationen:

https://www.iaf.fraunhofer.de/en

Jennifer Funk | Fraunhofer-Institut für Angewandte Festkörperphysik IAF

More articles from Trade Fair News:

nachricht Sanitized siphons – fewer hospital germs
18.04.2019 | Fraunhofer-Institut für Organische Elektronik, Elektronenstrahl- und Plasmatechnik FEP

nachricht Power Electronics: Ceramic Embedding Gives a Boost to Wide Bandgap Semiconductor Devices
12.04.2019 | Fraunhofer IISB

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Explosion on Jupiter-sized star 10 times more powerful than ever seen on our sun

A stellar flare 10 times more powerful than anything seen on our sun has burst from an ultracool star almost the same size as Jupiter

  • Coolest and smallest star to produce a superflare found
  • Star is a tenth of the radius of our Sun
  • Researchers led by University of Warwick could only see...

Im Focus: Quantum simulation more stable than expected

A localization phenomenon boosts the accuracy of solving quantum many-body problems with quantum computers which are otherwise challenging for conventional computers. This brings such digital quantum simulation within reach on quantum devices available today.

Quantum computers promise to solve certain computational problems exponentially faster than any classical machine. “A particularly promising application is the...

Im Focus: Largest, fastest array of microscopic 'traffic cops' for optical communications

The technology could revolutionize how information travels through data centers and artificial intelligence networks

Engineers at the University of California, Berkeley have built a new photonic switch that can control the direction of light passing through optical fibers...

Im Focus: A long-distance relationship in femtoseconds

Physicists observe how electron-hole pairs drift apart at ultrafast speed, but still remain strongly bound.

Modern electronics relies on ultrafast charge motion on ever shorter length scales. Physicists from Regensburg and Gothenburg have now succeeded in resolving a...

Im Focus: Researchers 3D print metamaterials with novel optical properties

Engineers create novel optical devices, including a moth eye-inspired omnidirectional microwave antenna

A team of engineers at Tufts University has developed a series of 3D printed metamaterials with unique microwave or optical properties that go beyond what is...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Revered mathematicians and computer scientists converge with 200 young researchers in Heidelberg!

17.04.2019 | Event News

First dust conference in the Central Asian part of the earth’s dust belt

15.04.2019 | Event News

Fraunhofer FHR at the IEEE Radar Conference 2019 in Boston, USA

09.04.2019 | Event News

 
Latest News

New automated biological-sample analysis systems to accelerate disease detection

18.04.2019 | Life Sciences

Explosion on Jupiter-sized star 10 times more powerful than ever seen on our sun

18.04.2019 | Physics and Astronomy

New eDNA technology used to quickly assess coral reefs

18.04.2019 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>