A physics process yielding low-power nanolasers in 2D semiconductor materials could be a game-changer for high speed communications
In his latest line of research, Cun-Zheng Ning, a professor of electrical engineering in the Ira A. Fulton Schools of Engineering at Arizona State University, and his peers explored the intricate balance of physics that governs how electrons, holes, excitons and trions coexist and mutually convert into each other to produce optical gain. Their results, led by Tsinghua University Associate Professor Hao Sun, were recently published in the Nature publication Light: Science & Applications.
Cun-Zheng Ning, a professor of electrical engineering in the Ira A. Fulton Schools of Engineering at Arizona State University, and collaborators from Tsinghua University in China discovered a process of physics that enables low-power nanolasers to be produced in 2D semiconductor materials. Understanding the physics behind lasers at nanoscale and how they interact with semiconductors can have major implications for high-speed communication channels for supercomputers and data centers.
Graphic by Rhonda Hitchcock-Mast/ASU
"While studying the fundamental optical processes of how a trion can emit a photon [a particle of light] or absorb a photon, we discovered that optical gain can exist when we have sufficient trion population," Ning says. "Furthermore, the threshold value for the existence of such optical gain can be arbitrarily small, only limited by our measurement system."
In Ning's experiment, the team measured optical gain at density levels four to five orders of magnitude -- 10,000 to 100,000 times -- smaller than those in conventional semiconductors that power optoelectronic devices, like barcode scanners and lasers used in telecommunications tools.
Ning has been driven to make such a discovery by his interest in a phenomenon called the Mott transition, an unresolved mystery in physics about how excitons form trions and conduct electricity in semiconductor materials to the point that they reach the Mott density (the point at which a semiconductor changes from an insulator to a conductor and optical gain first occurs).
But the electrical power needed to achieve Mott transition and density is far more than what is desirable for the future of efficient computing. Without new low-power nanolaser capabilities like the ones he is researching, Ning says it would take a small power station to operate one supercomputer.
"If optical gain can be achieved with excitonic complexes below the Mott transition, at low levels of power input, future amplifiers and lasers could be made that would require a small amount of driving power," Ning says.
This development could be game-changing for energy-efficient photonics, or light-based devices, and provide an alternative to conventional semiconductors, which are limited in their ability to create and maintain enough excitons.
As Ning observed in previous experiments with 2D materials, it is possible to achieve optical gain earlier than previously believed. Now he and his team have uncovered a mechanism that could make it work.
"Because of the thinness of the materials, electrons and holes attract each other hundreds of times stronger than in conventional semiconductors," Ning says. "Such strong charge interactions make excitons and trions very stable even at room temperatures."
This means the research team could explore the balance of the electrons, holes, excitons and trions as well as control their conversion to achieve optical gain at very low levels of density.
"When more electrons are in the trion state than their original electron state, a condition called population inversion occurs," Ning says. "More photons can be emitted than absorbed, leading to a process called stimulated emission and optical amplification or gain."
SOLVING NANOLASER MYSTERIES, ONE STEP OF FUNDAMENTAL SCIENCE AT A TIME
While this new discovery added a piece to the Mott transition puzzle -- it uncovered a new mechanism that researchers can exploit to create low-power 2D semiconductor nanolasers -- Ning says that they are not yet sure if this is the same mechanism that led to the production of their 2017 nanolasers.
Work is still ongoing in resolving the remaining mysteries.
Similar trion experiments were conducted in the 1990s with conventional semiconductors, Ning says, "but the excitons and trions were so unstable, both experimental observation and, especially, utilization of this optical gain mechanism for real devices are extremely difficult."
"Since the excitons and trions are much more stable in the 2D materials, there are new opportunities to make real-world devices out of these observations."
This interesting development by Ning and his research team is only at the fundamental science level. However, fundamental research can lead to exciting things.
"Basic science is a worldwide endeavor and everyone benefits if the best people from everywhere can be involved. ASU has provided an open and free environment, especially for international collaborations with top research groups in China, Germany, Japan and worldwide," Ning says.
His team has more work left to do to study how this new mechanism of optical gain works at different temperatures -- and how to use it to create the nanolasers purposefully.
"The next step is to design lasers that can operate specifically using the new mechanisms of optical gain," Ning says.
With the physics foundations laid, they could eventually be applied to create new nanolasers that could change the future of supercomputing and data centers.
"The long-term dream is to combine lasers and electronic devices in a single integrated platform, to enable a supercomputer or data center on a chip," Ning says. "For such future applications, our present semiconductor lasers are still too large to be integrated with electronic devices."
The Ira A. Fulton Schools of Engineering at Arizona State University, with more than 24,000 enrolled students, is the largest engineering school in the United States, offering 46 graduate and 25 undergraduate degree programs across seven schools of academic focus. With students, faculty and researchers representing all 50 states and 135 countries, the Fulton Schools of Engineering is creating an inclusive environment for engineering excellence by advancing research and innovation at scale, revolutionizing engineering education and expanding global outreach and partner engagement. The Fulton Schools of Engineering's research expenditures totaled $115 million for the 2019-2020 academic year. Learn more about the Fulton Schools of Engineering at engineering.asu.edu.
Lanelle Strawder | EurekAlert!
FAST detects neutral hydrogen emission from extragalactic galaxies for the first time
02.07.2020 | Chinese Academy of Sciences Headquarters
First exposed planetary core discovered
01.07.2020 | Universität Bern
Solar cells based on perovskite compounds could soon make electricity generation from sunlight even more efficient and cheaper. The laboratory efficiency of these perovskite solar cells already exceeds that of the well-known silicon solar cells. An international team led by Stefan Weber from the Max Planck Institute for Polymer Research (MPI-P) in Mainz has found microscopic structures in perovskite crystals that can guide the charge transport in the solar cell. Clever alignment of these "electron highways" could make perovskite solar cells even more powerful.
Solar cells convert sunlight into electricity. During this process, the electrons of the material inside the cell absorb the energy of the light....
Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range – and they are unrivalled in terms of weight.
Electric motors and electronic devices generate electromagnetic fields that sometimes have to be shielded in order not to affect neighboring electronic...
A promising operating mode for the plasma of a future power plant has been developed at the ASDEX Upgrade fusion device at Max Planck Institute for Plasma...
Live event – July 1, 2020 - 11:00 to 11:45 (CET)
"Automation in Aerospace Industry @ Fraunhofer IFAM"
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM l Stade is presenting its forward-looking R&D portfolio for the first time at...
With an X-ray experiment at the European Synchrotron ESRF in Grenoble (France), Empa researchers were able to demonstrate how well their real-time acoustic monitoring of laser weld seams works. With almost 90 percent reliability, they detected the formation of unwanted pores that impair the quality of weld seams. Thanks to a special evaluation method based on artificial intelligence (AI), the detection process is completed in just 70 milliseconds.
Laser welding is a process suitable for joining metals and thermoplastics. It has become particularly well established in highly automated production, for...
02.07.2020 | Event News
19.05.2020 | Event News
07.04.2020 | Event News
03.07.2020 | Life Sciences
03.07.2020 | Studies and Analyses
03.07.2020 | Power and Electrical Engineering