Quantum optical sensor for the first time tested in space – with a laser system from Berlin

MAIUS laser system used to successfully create a Bose-Einstein condensate for the first time in space. It is about as big as a shoe box with a mass of 27 kg. FBH’s laser modules are integrated on the bottom side of the heat sink, the top side houses modules for further processing of the light to be transferred to the main experiment. (© Humboldt-Universität zu Berlin)

According to Albert Einstein's Equivalence Principle, all bodies are accelerated at the same rate by the Earth's gravity, regardless of their properties. This principle applies to stones, feathers, and atoms alike. Under conditions of microgravity, very long and precise measure-ments can be carried out to determine whether different types of atoms actually “fall equally fast” in the gravitational field of the Earth – or if we have to revise our understanding of the universe.

As part of a national consortium, Ferdinand-Braun-Institut, Leibniz-Institut fuer Hoechstfre-quenztechnik (FBH) and Humboldt-Universitaet zu Berlin (HU) now made a historical step towards testing the Equivalence Principle in the microcosm of quantum objects. In the MAIUS mission launched on January 23, 2017 a cloud of nano-Kelvin cold rubidium atoms has been generated in space for the first time ever. This cloud was cooled down with laser light and radio frequency electrical fields so that the atoms finally formed a single quantum object, a Bose-Einstein condensate (BEC).

More than 20 years after the groundbreaking results of the Nobel laureates Cornell, Ketterle, and Wieman on ultra-cold atoms, preliminary evaluation of the sounding rocket mission data indicates that such experiments can also be carried out under the harsh conditions of space operation – back in 1995, living room-sized setups in a special laboratory environment were required. Today’s quantum optical sensor is as small as a freezer and remains fully opera-tional even after experiencing huge mechanical and thermal stress caused by the rocket launch. This groundbreaking mission is a pathfinder for applications of quantum sensors in space.

In the future, scientists expect to use quantum sensor technology to cope with one of the biggest challenges of modern physics: the unification of gravitation with the other funda-mental interactions (strong, weak, and electro-magnetic force) in a single consistent theory. At the same time, these experiments are drivers of innovation for a broad range of applica-tions, from inertial (non-GPS referenced) navigation to space-borne geodesy used to deter-mine the Earth’s shape.

Comprehensive know-how in laser modules designed for space applications

For this mission, the FBH has developed hybrid micro-integrated semiconductor laser mod-ules that are suitable for application in space. These laser modules, together with optical and spectroscopic units provided by third partners, have been integrated and qualified by HU to provide the laser subsystem of the scientific payload. The results of this mission coordinated by Leibniz Universitaet Hannover do not only prove that quantum optical experiments with ultra-cold atoms are possible in space, but also give FBH and HU the opportunity to test their miniaturized laser system technology under real operating conditions.

The results will also be used to prepare future missions which are already scheduled for launch. MAIUS, however, is not the first sounding rocket test for both institutions’ laser technology in space; the technolo-gy has already been successfully tested in April 2015 and January 2016 on board of two sounding rockets within the FOKUS and KALEXUS experiments.

MAIUS: matter-wave interferometry under microgravity conditions

The MAIUS mission is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry of Economic Affairs and Energy and tests all key technologies of a space-borne quantum optical sensor on a sounding rocket: vacuum chamber, laser system, electronics, and software. MAIUS constitutes a historical milestone for future missions in space that will take advantage of the full potential of quantum technology.

For the first time world-wide, a Bose-Einstein condensate (BEC) based on rubidium atoms has been created on board of a sounding rocket and has been used to investigate atom interferometry in space. Quantum optical sensors based on BECs enable high-precision measurements of accelerations and rotations using laser pulses which provide a reference for precise determi-nation of the positions of the atomic cloud.

The compact and robust diode laser system for laser cooling and atom interferometry with ultra-cold rubidium atoms has been developed under the leadership of the Optical Metrology Group at HU. This system is required for the operation of the MAIUS experiment and con-sists of four diode laser modules that have been developed by FBH as hybrid-integrated master-oscillator power-amplifier laser modules.

The master laser is a monolithic distributed feedback (DFB) laser which is frequency-stabilized to the frequency of an optical transition in rubidium and generates spectrally pure and highly stable (~ 1 MHz linewidth) optical radiation with low output power at 780 nm wavelength.

The three other laser modules feature a ta-pered amplifier chip with a ridge waveguide input section. These tapered amplifier chips boost the optical output power of a DFB laser to beyond 1 W without any loss of spectral stability. Two additional redundancy modules were integrated. Free space acousto-optical modulators and optical components are used to generate the laser pulses according to the experimental sequence. The laser light pulses are finally transferred to the experimental chamber by optical fibers.

Furthermore, a laser technology demonstrator designed for future missions has been inte-grated, consisting of two micro-integrated semiconductor Extended Cavity Diode Laser (ECDL) modules developed by FBH. These modules are specifically required for future atom interferometry experiments that pose more stringent requirements on the spectral stability of the lasers.

Contact
Ferdinand-Braun-Institut Leibniz-Institut fuer Hoechstfrequenztechnik

Petra Immerz / Dr. Andreas Wicht
Phone +49.30.6392-2626 / -3958
Email petra.immerz@fbh-berlin.de / andreas.wicht@fbh-berlin.de
Web www.fbh-berlin.de

Humboldt-Universität zu Berlin AG Optische Metrologie

Prof. Achim Peters, PhD / Dr. Markus Krutzik
Phone +49.30.2093-4905 / -4814
Email achim.peters@physik.hu-berlin.de / markus.krutzik@physik.hu-berlin.de
Web www.physik.hu-berlin.de/en/qom

About the Joint Lab Laser Metrology

The Ferdinand-Braun-Institut and the Optical Metrology Group of the Mathematics and Natural Sci-ences Faculty of the Humboldt-Universitaet zu Berlin work closely together within the framework of the Joint Lab Laser Metrology to develop narrow-linewidth laser modules and laser systems for precision optical spectroscopy, specifically in the field and in space The cooperation brings together the exper-tise of semiconductor laser experts and quantum opticians so that the laser modules can be designed to meet the specific requirements of quantum optical experiments in harsh environments.

Media Contact

Petra Immerz / Dr. Andreas Wicht Ferdinand-Braun-Institut Leibniz-Institut für Höchstfrequenztechnik

All latest news from the category: Physics and Astronomy

This area deals with the fundamental laws and building blocks of nature and how they interact, the properties and the behavior of matter, and research into space and time and their structures.

innovations-report provides in-depth reports and articles on subjects such as astrophysics, laser technologies, nuclear, quantum, particle and solid-state physics, nanotechnologies, planetary research and findings (Mars, Venus) and developments related to the Hubble Telescope.

Back to home

Comments (0)

Write a comment

Newest articles

Results for control of pollutants in water

Brazilian scientists tested a simple and sustainable method for monitoring and degrading a mixture of polycyclic aromatic hydrocarbons, compounds present in fossil fuels and industrial waste. An article published in the journal Catalysis…

A tandem approach for better solar cells

Perovskite-based solar cells were first proved in 2009 to have excellent light-absorbing properties of methylammonium lead bromide and methylammonium lead iodide, collectively referred to as lead halide perovskites or, more…

The behavior of ant queens is shaped by their social environment

Specialization of ant queens as mere egg-layers is reversible / Queen behavioral specialization is initiated and maintained by the presence of workers. The queens in colonies of social insects, such…

Partners & Sponsors