Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Surgery Training with Robots and Virtual Reality


Joint press release from the University of Bremen and Chemnitz University of Technology

The insertion of hip implants places high demands on surgeons. To help young doctors practice this operation under realistic conditions, scientists from the University of Bremen and Chemnitz University of Technology are developing a dynamic hip implant simulator. Users see the scene in virtual reality and operate surgical instruments connected to a robot.

Aspiring surgeons be able to train on procedures such as the separation of the femoral head, the scraping of the femur, and the implanting of the artificial joint, all in virtual reality. Photo: Project "HIPS"

The growing number of older people worldwide is leading to an increase in hip implants and other joint replacement operations. This also increases the need for highly qualified orthopedic surgeons, but the practical training of these operations is very difficult to carry out.

Scientists at Chemnitz University of Technology and the University of Bremen are therefore developing a dynamic hip implant simulator in the "Dynamic HIPS" project, which officially started on 1 May 2020. The simulator will allow doctors to practice the operation multiple times and help them get a realistic feeling for the tasks.

The project focusses on three particularly critical surgical steps: the separation of the femoral head, the scraping out of the thighbone and the implantation of the artificial joint.

"The system allows prospective surgeons to gain significant experience before their first real operation," explains Prof. Gabriel Zachmann from the Center for Computing Technologies (TZI) at the University of Bremen. "Experienced surgeons also benefit from this training simulator because they can prepare for complicated, rarely performed procedures."

Same sensory perceptions as in a real operation

Surgery is often performed in the smallest possible surgical openings to protect the patient. "As a result, the surgeon operates very much by feel," explains Mario Lorenz from the Chair of Machine Tools at Chemnitz University of Technology.

"Operations such as the implantation of a hip prosthesis also require manual work with high forces. It is very important for the success of the operation to perform these tasks as precisely as possible. However, up to now there is a lack of training equipment that can give surgeons exactly the same sensory perceptions that they would feel during a real operation such as the resistance of the bone during sawing and scraping.”

The Dynamic HIPS project therefore pursues several goals that will make it possible to develop the necessary training devices. The researchers want to determine the forces, torques and speeds that occur during the three surgical steps to be simulated. On this basis, they want to further develop a robotic arm and existing haptic devices – devices that can convey realistic sensory perceptions.

Equally important is the creation of a mathematical model that simulates the resistances and material removal at the bone. This information must be transmitted to the robot within a millisecond to give the surgeons a realistic feeling.

Experts can join training sessions from other parts of the world

A second set of objectives deals with VR technology, which enables joint training over long distances ("remote training"). With the help of a multi-user system, experienced surgeons can pass on their medical expertise to trainee surgeons without being on-site themselves. This functionality not only facilitates the transfer of knowledge to emerging and developing countries but also serves the exchange of knowledge between experienced surgeons.

Researchers face the challenge of minimizing the time delays in synchronizing VR scenes despite the large spatial distance between users so that both surgeons are in an identical situation.

At the same time, the scientists want to strengthen the interaction between users in the VR environment by providing ways to communicate without words, for example by pointing to virtual 3D drawings. In the future, it should also be possible to record sequences and add audio commentary to create training videos.

Extensive user study to ensure acceptance

In addition to the University of Bremen and the Chemnitz University of Technology, the companies FAKT Software GmbH, Haption GmbH, CAT Production GmbH and YOUSE GmbH are participating in the project. Part of the consortium had already developed a training simulator for milling the hip socket in the predecessor project HIPS (

From a medical point of view, the development is being supported by the Department of Orthopaedic, Trauma and Plastic Surgery at the University Hospital Leipzig, the Center for Research on Musculoskeletal Systems (ZESBO), the Division of Macroscopic and Clinical Anatomy at the Medical University of Graz (Austria) and the Medical Technology Department of the Fraunhofer Institute for Machine Tools and Forming Technology (IWU).

The entire development process in Dynamic HIPS is user-centric. Orthopedic surgeons are involved in determining the system’s desired characteristics and participate in designing and evaluating the solutions. The final project phase also includes an extensive user study. The three-year project is funded by the German Federal Ministry of Education and Research with over 2 million euros.

Wissenschaftliche Ansprechpartner:

Mario Lorenz, Chemnitz University of Technology, phone 0371 531-39366, e-mail

Prof. Dr. Gabriel Zachmann, University of Bremen, Tel. 0421/218-63991, E-Mail

Axel Kölling | idw - Informationsdienst Wissenschaft
Further information:

More articles from Medical Engineering:

nachricht Developing microbeam radiation therapy (MRT) for inoperable cancer
13.05.2020 | University of Saskatchewan

nachricht Tailored implants: Applied mechanics and AI combine to deliver patient-specific fracture therapy
13.05.2020 | Universität des Saarlandes

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Surgery Training with Robots and Virtual Reality

Joint press release from the University of Bremen and Chemnitz University of Technology

The insertion of hip implants places high demands on surgeons. To help young doctors practice this operation under realistic conditions, scientists from the...

Im Focus: Technology innovation for neurology: Brain signal measurement using printed tattoo electrodes

TU Graz researcher Francesco Greco has developed ultra-light tattoo electrodes that are hardly noticeable on the skin and make long-term measurements of brain activity cheaper and easier.

In 2015 Francesco Greco, head of the Laboratory of Applied Materials for Printed and Soft electronics (LAMPSe, at the Institute of Solid...

Im Focus: Future information technologies: 3D Quantum Spin Liquid revealed

Quantum Spin Liquids are candidates for potential use in future information technologies. So far, Quantum Spin Liquids have usually only been found in one or two dimensional magnetic systems only. Now an international team led by HZB scientists has investigated crystals of PbCuTe2O6 with neutron experiments at ISIS, NIST and ILL. They found spin liquid behaviour in 3D, due to a so called hyper hyperkagome lattice. The experimental data fit extremely well to theoretical simulations also done at HZB.

IT devices today are based on electronic processes in semiconductors. The next real breakthrough could be to exploit other quantum phenomena, for example...

Im Focus: IST Austria scientists demonstrate quantum radar prototype

Physicists at the Institute of Science and Technology Austria (IST Austria) have invented a new radar prototype that utilizes quantum entanglement as a method of object detection. This successful integration of quantum mechanics into our everyday devices could significantly impact the biomedical and security industries. The research is published in the journal Science Advances.

Quantum entanglement is a physical phenomenon where two particles remain inter-connected, sharing physical traits regardless of how far apart they are from one...

Im Focus: First simulation of a full-sized mitochondrial membrane

New algorithm links different scales, bringing simulated cell a step closer

Scientists from the University of Groningen have developed a method that combines different resolution levels in a computer simulation of biological membranes.

All Focus news of the innovation-report >>>



Industry & Economy
Event News

Aachen Machine Tool Colloquium AWK'21 will take place on June 10 and 11, 2021

07.04.2020 | Event News

International Coral Reef Symposium in Bremen Postponed by a Year

06.04.2020 | Event News

13th AKL – International Laser Technology Congress: May 4–6, 2022 in Aachen – Laser Technology Live already this year!

02.04.2020 | Event News

Latest News

Electrolysis: Chemists at the University of Halle have discovered how to produce better electrodes

14.05.2020 | Life Sciences

How interstitial ordering affects high-strength steels

14.05.2020 | Machine Engineering

Riesling for the immune system?

14.05.2020 | Health and Medicine

Science & Research
Overview of more VideoLinks >>>