Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Innovation for the hybrid operating room: New solution for heart and vascular surgery

19.10.2009
Joint Press Release of Siemens Healthcare and Medtronic

Siemens and Medtronic introduce a joint range of products at the EACTS

During the Annual Meeting of the European Association for Cardio-Thoracic Surgery (EACTS) from October 17 to 21, 2009, Siemens Healthcare and Medtronic will jointly present their range of hybrid operating rooms (ORs) in which both interventional and surgical operations can be performed. Furthermore, on October 19 Medtronic and Siemens will be holding a lunch symposiumon the topic of 'Lifetime management of patients with aortic valve diseases'.

Another highlight will be the live transmission of a transapical aortic valve implantation fromthe hybrid OR of the Leipzig Heart Center to be performed by Prof. Dr. Walther, the Senior Physician in Charge. This operation can be viewed during the Techno- College to be held on October 17.

During the 23rd Annual Meeting of the European Association for Cardio-Thoracic Surgery in Vienna, Siemens and Medtronic will present innovative solutions for hybrid ORs within the scope of their partnership agreement. These include, for example, the transcatheter valves from Medtronic.

The latter are artificial heart valves which can be implanted in the heart via a catheter. This operation requires fluoroscopy systems which supply an image quality with details that are not available from the mobile C-arm X-ray systems used in conventional ORs. This is where the Artis zeego angiography system from Siemens comes into play. The system enables the physician to position the C-arm virtually anywhere in the area surrounding the patient and produce new types of clinical images, e.g. a 3D representation with a live fluoro overlay.

The physician can thus check whether the new valve is optimally positioned and functioning properly at any time. In addition, with Performer CPB, Medtronic offers a compact heart-lung machine which can be used flexibly and efficiently in the hybrid OR. Furthermore, using the Bio-Medicus cannulae from Medtronic, extracorporeal circulatory support can be set up very quickly in the hybrid OR.

Rob ten Hoedt, President of Medtronic in Europe and Central Asia explained: "New developments in the fields of heart surgery and interventional cardiology enable less invasive therapy for many heart and vascular conditions. The alliance between Medtronic and Siemens enables us to offer physicians an optimized hybrid operating room solution which is the ideal environment to perform these less invasive procedures. This catheter based approach brings new treatment option for patients who are not indicated for conventional surgery, thereby fulfilling Medtronic’s Mission of alleviating pain, restoring health and extending life."

Heinrich Kolem, CEO of Angio, Fluoroscopic and Radiographic Systems at Siemens Healthcare, adds: “Siemens offers its customers integrated hybrid OR solutions in the field of surgery. Such solutions can be made possible only through partnerships with companies that share the same vision for the future of heart surgery. And that's the reason why we work together with companies like Medtronic, who offer outstanding devices and perfusion solutions for the hybrid OR."

In addition to their hybrid OR range, Siemens and Medtronic also collaborate on advanced training for physicians. Thus, for example, the two companies have developed training programs dealing with imaging and handling catheters in cardiovascular surgery. Following a theoretical part, the course participants train on simulators and on angiography systems which use real radiation. In the practical part, an experienced surgeon is available for every two participants. Intensive training in small groups ensures learning success.

Heart and vascular surgery is one of the most commonly used and, at the same time, one of the most complex procedures in modern medicine. Some 260,000 patients are currently afflicted with severe aortic stenosis inWestern Europe alone. Of these, roughly 50,000 are regarded as inoperable due to their risk profiles. New developments in surgical procedures such as, for example, the replacement of heart valves via catheter and the implantation of stents in the thoracic aorta now promise better therapeutic possibilities for such patients. The ideal environment for such treatments is the so-called hybrid operating room, which represents a synthesis between a cardiosurgical operating room and a cardiac cath lab. In addition to conventional OR equipment including a heart-lung machine and a complete angiography system, it also features a C-arm which is capable of revolving around the patient, thus providing images similar to the scans generated by a CT scanner. These new hybrid operating rooms enable surgeons and cardiologists to efficiently perform new and promising treatment procedures, especially in the fields of heart and vascular surgery, e.g. heart valve implantations and the insertion of stents in the thoracic aorta.

Medtronic, Inc., headquartered in Minneapolis, is the world’s leading medical technology company, alleviating pain, restoring health and extending life for people with chronic disease.

The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens is the only company to offer customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. Siemens Healthcare employs some 49,000 employees worldwide and operates in over 130 countries. In fiscal year 2008 (to September 30), the Sector posted revenue of 11.2 billion euros and profit of 1.2 billion euros.

Bianca Braun | Siemens Healthcare
Further information:
http://www.medtronic.com
http://www.siemens.com/healthcare

More articles from Medical Engineering:

nachricht Biosensor allows real-time oxygen monitoring for 'organs-on-a-chip'
21.08.2018 | North Carolina State University

nachricht Can radar replace stethoscopes?
14.08.2018 | Friedrich-Alexander-Universität Erlangen-Nürnberg

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: It’s All in the Mix: Jülich Researchers are Developing Fast-Charging Solid-State Batteries

There are currently great hopes for solid-state batteries. They contain no liquid parts that could leak or catch fire. For this reason, they do not require cooling and are considered to be much safer, more reliable, and longer lasting than traditional lithium-ion batteries. Jülich scientists have now introduced a new concept that allows currents up to ten times greater during charging and discharging than previously described in the literature. The improvement was achieved by a “clever” choice of materials with a focus on consistently good compatibility. All components were made from phosphate compounds, which are well matched both chemically and mechanically.

The low current is considered one of the biggest hurdles in the development of solid-state batteries. It is the reason why the batteries take a relatively long...

Im Focus: Color effects from transparent 3D-printed nanostructures

New design tool automatically creates nanostructure 3D-print templates for user-given colors
Scientists present work at prestigious SIGGRAPH conference

Most of the objects we see are colored by pigments, but using pigments has disadvantages: such colors can fade, industrial pigments are often toxic, and...

Im Focus: Unraveling the nature of 'whistlers' from space in the lab

A new study sheds light on how ultralow frequency radio waves and plasmas interact

Scientists at the University of California, Los Angeles present new research on a curious cosmic phenomenon known as "whistlers" -- very low frequency packets...

Im Focus: New interactive machine learning tool makes car designs more aerodynamic

Scientists develop first tool to use machine learning methods to compute flow around interactively designable 3D objects. Tool will be presented at this year’s prestigious SIGGRAPH conference.

When engineers or designers want to test the aerodynamic properties of the newly designed shape of a car, airplane, or other object, they would normally model...

Im Focus: Robots as 'pump attendants': TU Graz develops robot-controlled rapid charging system for e-vehicles

Researchers from TU Graz and their industry partners have unveiled a world first: the prototype of a robot-controlled, high-speed combined charging system (CCS) for electric vehicles that enables series charging of cars in various parking positions.

Global demand for electric vehicles is forecast to rise sharply: by 2025, the number of new vehicle registrations is expected to reach 25 million per year....

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

LaserForum 2018 deals with 3D production of components

17.08.2018 | Event News

Within reach of the Universe

08.08.2018 | Event News

A journey through the history of microscopy – new exhibition opens at the MDC

27.07.2018 | Event News

 
Latest News

A paper battery powered by bacteria

21.08.2018 | Power and Electrical Engineering

Protein interaction helps Yersinia cause disease

21.08.2018 | Life Sciences

Biosensor allows real-time oxygen monitoring for 'organs-on-a-chip'

21.08.2018 | Medical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>