Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Fraunhofer MEVIS: New procedure to make brain surgery safer

31.05.2011
Brain interventions must be planned so that the neurosurgeon can access and remove the tumor without causing unnecessary damage. Before the brain tumor can be removed, crucial questions must be answered. Where do the functional areas of the cortex (gray matter) of the patient lie?

What are the paths of the nerve fiber tracts that connect them? Answering these questions is important because the functional areas of the brain are interconnected via nerve pathways, also known as nerve fiber tracts.

These nerve tracts must be protected as much as possible; otherwise, permanent dysfunction could occur. Furthermore, nerve tracts can be pushed or infiltrated by the brain tumor itself. If nerve tracts become damaged during an operation, there is a risk that distant functional areas connected to the tumor-afflicted part of the brain could be affected and induce lasting sensory, motor, and cognitive impairment. Therefore, neurosurgeons attempt to answer these questions for each patient during the planning stage of the brain operation to minimize the risks present in the intervention. To do so, surgeons require medical imagery of each patient's brain anatomy and function that is as realistic and precise as possible. However, medical images contain inaccuracies that arise from the processing, modeling, and reconstruction of patient data.

Solving these problems requires more than merely improving existing imaging methods. Mathematical analysis and models must be integrated to produce information about the location of the tumor, functional areas, and nerve fiber tracts, to increase the accuracy of patient-specific data, and to give the surgeon dependable knowledge.

The Fraunhofer MEVIS Institute for Medical Image Computing in Bremen, Germany has pioneered a procedure that analyzes uncertainty in patient-specific images, modeling, and reconstruction and incorporates this information into reconstructions of patient data. This procedure allows safety margins around nerve tracts in the brain to be more accurately determined. In addition, the reliability of the reconstructed data is calculated to supply the surgeon with accurate information concerning nerve tract locations, paths, and intersections and to construct safety margins around the nerve fiber tracts. By integrating errors in measurement, reconstruction, and modeling, the exact locations of tracts in a space-occupying tumor are calculated. This gives the neurosurgeon a reliable prognosis concerning where the incision in the brain should be made and which safety margins should be chosen to avoid harming nerve tracts and irreversibly damaging important functional areas. Before an intervention, the surgeon can evaluate patient-specific risks. These software assistants will be refined and implemented for neuronavigation in future operations, providing the surgeon with updated information during surgery that can be compared to planning data.

The paths of nerve tracts in the brain and the functional areas that they connect can now be explored by visitors of the "New Paths in Medicine" exhibit on the MS Wissenschaft exhibition ship. The converted inland vessel is underway until September 29, 2011 and docks in 35 different cities. During the "Year of Health Research", visitors can familiarize themselves with the field's newest trends, developments, and research findings. The exhibit showcases a physical three-dimensional model of the brain produced through an innovative printing process based on the medical image data of a real person. This brain model can be touched and viewed from different angles thanks to its rotating base. Nerve tracts can be activated by touching sensors on the physical model that correspond to functional areas of the brain. The brain is displayed on a screen along with the activated nerve tracts that are responsible, for instance, for sight, speech, feeling, and motion. This new form of interactive exhibit was developed by Fraunhofer MEVIS in Bremen together with the Universum® Science Center in Bremen to demonstrate how modern image processing combined with mathematics and intelligent software can help make neurosurgical operations more predictable and safe. The three-dimensional print of the brain was produced by the Fraunhofer-Institut ITWM in Kaiserslautern.

Background Information:

Since 1995, Fraunhofer MEVIS has pioneered research and development of computer assistance for image-based, personalized medicine. Risk minimization in planning and surgical intervention constitutes an important field of activity. Researchers at Fraunhofer MEVIS develop mathematical models that characterize the human body's structures such as the vascular tree of the liver or the bronchi of the lung. These models are processed for each patient and used to determine how much of a tumor and surrounding tissue can be removed and when to mind safety margins to protect vital structures. Thanks to detailed, patient-specific reconstructed models of organs, surgeons can estimate the risks of an operation before intervention and plan optimal procedures. With more than 100 clinical partners worldwide and over 5,500 prepared clinical cases for liver surgery planning alone, Fraunhofer MEVIS draws upon extensive experience in surgical operation planning and clinical procedures. This experience has led to the development of a navigation system for liver surgery which records ultrasound data and correlates it with planning data. During surgery, new information can be recorded and added to the planning data.

With the help of the dependable knowledge gained from reconstruction and analysis, surgeons no longer need to rely solely on implied knowledge attained through experience. Skilled and experienced surgeons can reliably conduct an intervention and identify risks without having to explicitly specify why they have intuitively chosen to abandon a conventional surgical path in favor of a different one. Less-experienced surgeons lack this implicit knowledge. Fraunhofer MEVIS software assistants can also help these surgeons work more safely by providing this knowledge. This is relevant not only for individual patients, but also for the quality of care as a whole. Thanks to these new processes and software assistants developed by Fraunhofer MEVIS, the quality of care in both urban and rural clinics can be improved.

About Fraunhofer MEVIS:

The Fraunhofer MEVIS Institute for Medical Image Computing in Bremen is one of the world's leading internationally connected research and development centers for computer assistance in image-based medicine. It follows a patient-centered, workflow-oriented approach towards resolving clinically relevant issues in image-based diagnosis and therapy. Fraunhofer MEVIS concentrates on epidemiologically significant diseases of the cardiovascular system, brain, liver, and lung, as well as oncological disorders.

Dr. Guido Prause | EurekAlert!
Further information:
http://www.mevis.fraunhofer.de

More articles from Medical Engineering:

nachricht A first look at interstitial fluid flow in the brain
05.07.2018 | American Institute of Physics

nachricht A sentinel to watch over ocular pressure
04.07.2018 | Fraunhofer Institute for Microelectronic Circuits and Systems

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First evidence on the source of extragalactic particles

For the first time ever, scientists have determined the cosmic origin of highest-energy neutrinos. A research group led by IceCube scientist Elisa Resconi, spokesperson of the Collaborative Research Center SFB1258 at the Technical University of Munich (TUM), provides an important piece of evidence that the particles detected by the IceCube neutrino telescope at the South Pole originate from a galaxy four billion light-years away from Earth.

To rule out other origins with certainty, the team led by neutrino physicist Elisa Resconi from the Technical University of Munich and multi-wavelength...

Im Focus: Magnetic vortices: Two independent magnetic skyrmion phases discovered in a single material

For the first time a team of researchers have discovered two different phases of magnetic skyrmions in a single material. Physicists of the Technical Universities of Munich and Dresden and the University of Cologne can now better study and understand the properties of these magnetic structures, which are important for both basic research and applications.

Whirlpools are an everyday experience in a bath tub: When the water is drained a circular vortex is formed. Typically, such whirls are rather stable. Similar...

Im Focus: Breaking the bond: To take part or not?

Physicists working with Roland Wester at the University of Innsbruck have investigated if and how chemical reactions can be influenced by targeted vibrational excitation of the reactants. They were able to demonstrate that excitation with a laser beam does not affect the efficiency of a chemical exchange reaction and that the excited molecular group acts only as a spectator in the reaction.

A frequently used reaction in organic chemistry is nucleophilic substitution. It plays, for example, an important role in in the synthesis of new chemical...

Im Focus: New 2D Spectroscopy Methods

Optical spectroscopy allows investigating the energy structure and dynamic properties of complex quantum systems. Researchers from the University of Würzburg present two new approaches of coherent two-dimensional spectroscopy.

"Put an excitation into the system and observe how it evolves." According to physicist Professor Tobias Brixner, this is the credo of optical spectroscopy....

Im Focus: Chemical reactions in the light of ultrashort X-ray pulses from free-electron lasers

Ultra-short, high-intensity X-ray flashes open the door to the foundations of chemical reactions. Free-electron lasers generate these kinds of pulses, but there is a catch: the pulses vary in duration and energy. An international research team has now presented a solution: Using a ring of 16 detectors and a circularly polarized laser beam, they can determine both factors with attosecond accuracy.

Free-electron lasers (FELs) generate extremely short and intense X-ray flashes. Researchers can use these flashes to resolve structures with diameters on the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Leading experts in Diabetes, Metabolism and Biomedical Engineering discuss Precision Medicine

13.07.2018 | Event News

Conference on Laser Polishing – LaP: Fine Tuning for Surfaces

12.07.2018 | Event News

11th European Wood-based Panel Symposium 2018: Meeting point for the wood-based materials industry

03.07.2018 | Event News

 
Latest News

World’s Largest Study on Allergic Rhinitis Reveals new Risk Genes

17.07.2018 | Life Sciences

Electronic stickers to streamline large-scale 'internet of things'

17.07.2018 | Information Technology

Behavior-influencing policies are critical for mass market success of low carbon vehicles

17.07.2018 | Power and Electrical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>