Seven of the ten most frequent medications contain chiral agents. These are molecules that occur in right- or left-handed forms. During chemical synthesis both forms usually occur in equal parts and have to be separated afterward, because chirality determines the agent’s effect in the body. Physicists at Goethe University have now succeeded in using laser light for the purpose of creating either right- or left-handed molecules.
“In pharmaceutics, being able to transition a molecule from one chirality to the other using light instead of wet chemistry would be a dream,” says Professor Reinhard Dörner from the Institute of Atomic Physics at Goethe University. His doctoral student Kilian Fehre has now brought this dream one step closer to coming true. His observation: the formation of the right- or left-handed version depends on the direction from which laser light hits the initiator.
The formic acid model is in the centre. The color code of the surrounding sphere shows the direct chirality of the formic acid for every direction from which the laser comes. If the laser is directed from the right side (right arrow), it results in right-handed formic acid; if from the left, in left-handed formic acid. Both chiral formic acids reflect the common structure of the molecule.
For his experiment, Kilian Fehre used the planar formic acid molecule. He activated it with an intense, circularly polarized laser pulse to transition it to a chiral form. At the same time, the radiation caused the molecule to break into its atomic components. It was necessary to destroy the molecule for the experiment so that it could be determined whether a duplicate or mirror version was created.
Fehre used the “reaction microscope” (COLTRIMS method) that was developed at the Institute for Atomic Physics for the analysis. It allows the investigation of individual molecules in a molecular beam. After the molecule’s explosive breakdown, the data provided by the detector can be used to precisely calculate the direction and speed of the fragments’ paths. This makes it possible to reconstruct the molecule’s spatial structure.
In order to create chiral molecules with the desired chirality in the future, it has to be ensured that the molecules are oriented the same way with regard to the circularly polarized laser pulse. This could be achieved by orienting them beforehand using a long-wave laser light.
This discovery could also play a critical role in generating larger quantities of molecules with uniform chirality. However, the researchers believe that in such cases, liquids would probably be radiated rather than gases. “There is a lot of work to be done before we get that far,” Kilian Fehre believes.
The detection and manipulation of chiral molecules using light is the focus of a priority programme which goes by the memorable name “ELCH” and which has been funded by the German Research Council since 2018. Scientists from Kassel, Marburg, Hamburg and Frankfurt have joined forces in this programme. “The long-term funding and the close collaboration with the priority programme provide us with the necessary resources to learn to control chirality in a large class of molecules in the future,” concludes Markus Schöffler, one of the Frankfurt project managers of the priority programme.
Publication: K. Fehre, S. Eckart, M. Kunitski, M. Pitzer, S. Zeller, C. Janke, D. Trabert, J. Rist, M. Weller, A. Hartung, L. Ph. H. Schmidt, T. Jahnke, R. Berger, R. Dörner und M. S. Schöffler: Enantioselective fragmentation of an achiral molecule in a strong laser field, in: Science Advances, doi: 10.1126/sciadv.aau7923
An image can be downloaded here: www.uni-frankfurt.de/76731281
Caption: The formic acid model is in the centre. The color code of the surrounding sphere shows the direct chirality of the formic acid for every direction from which the laser comes. If the laser is directed from the right side (right arrow), it results in right-handed formic acid; if from the left, in left-handed formic acid. Both chiral formic acids reflect the common structure of the molecule.
Further information: Kilian Fehre, Tel: +49 69 798-47004, firstname.lastname@example.org; Prof. Reinhard Dörner, Tel: +49 69 798-47003, email@example.com; Dr. Markus Schöffler, Tel: +49 69 798-47022, firstname.lastname@example.org. Institute for Atomic Physics, Faculty of Physics, Riedberg Campus.
Current news about science, teaching, and society can be found on GOETHE-UNI online (www.aktuelles.uni-frankfurt.de)
Goethe University is a research-oriented university in the European financial centre Frankfurt am Main. The university was founded in 1914 through private funding, primarily from Jewish sponsors, and has since produced pioneering achievements in the areas of social sciences, sociology and economics, medicine, quantum physics, brain research, and labour law. It gained a unique level of autonomy on 1 January 2008 by returning to its historic roots as a "foundation university". Today, it is one of the three largest universities in Germany. Together with the Technical University of Darmstadt and the University of Mainz, it is a partner in the inter-state strategic Rhine-Main University Alliance. Internet: www.uni-frankfurt.de
Publisher: The President of Goethe University Editor: Dr. Anne Hardy, Science Editor, PR & Communication Department, Theodor-W.-Adorno-Platz 1, 60323 Frankfurt am Main, Tel: (069) 798-13035, Fax: (069) 798-763 12531.
Kilian Fehre, Tel: +49 69 798-47004, email@example.com; Prof. Reinhard Dörner, Tel: +49 69 798-47003, firstname.lastname@example.org; Dr. Markus Schöffler, Tel: +49 69 798-47022, email@example.com. Institute for Atomic Physics, Faculty of Physics, Riedberg Campus.
Jennifer Hohensteiner | idw - Informationsdienst Wissenschaft
An ion channel with a doorkeeper: The pH of calcium ions controls ion channel opening
25.06.2019 | Johannes Gutenberg-Universität Mainz
Symbiotic upcycling: Turning “low value” compounds into biomass
25.06.2019 | Max-Planck-Institut für Marine Mikrobiologie
From June 25th to 27th 2019, the Fraunhofer Institute for Digital Media Technology IDMT in Ilmenau (Germany) will be presenting a new solution for acoustic quality inspection allowing contact-free, non-destructive testing of manufactured parts and components. The method which has reached Technology Readiness Level 6 already, is currently being successfully tested in practical use together with a number of industrial partners.
Reducing machine downtime, manufacturing defects, and excessive scrap
The quality of additively manufactured components depends not only on the manufacturing process, but also on the inline process control. The process control ensures a reliable coating process because it detects deviations from the target geometry immediately. At LASER World of PHOTONICS 2019, the Fraunhofer Institute for Laser Technology ILT will be demonstrating how well bi-directional sensor technology can already be used for Laser Material Deposition (LMD) in combination with commercial optics at booth A2.431.
Fraunhofer ILT has been developing optical sensor technology specifically for production measurement technology for around 10 years. In particular, its »bd-1«...
The well-known representation of chemical elements is just one example of how objects can be arranged and classified
The periodic table of elements that most chemistry books depict is only one special case. This tabular overview of the chemical elements, which goes back to...
Light can be used not only to measure materials’ properties, but also to change them. Especially interesting are those cases in which the function of a material can be modified, such as its ability to conduct electricity or to store information in its magnetic state. A team led by Andrea Cavalleri from the Max Planck Institute for the Structure and Dynamics of Matter in Hamburg used terahertz frequency light pulses to transform a non-ferroelectric material into a ferroelectric one.
Ferroelectricity is a state in which the constituent lattice “looks” in one specific direction, forming a macroscopic electrical polarisation. The ability to...
Researchers at TU Graz calculate the most accurate gravity field determination of the Earth using 1.16 billion satellite measurements. This yields valuable knowledge for climate research.
The Earth’s gravity fluctuates from place to place. Geodesists use this phenomenon to observe geodynamic and climatological processes. Using...
24.06.2019 | Event News
29.04.2019 | Event News
17.04.2019 | Event News
25.06.2019 | Architecture and Construction
25.06.2019 | Life Sciences
25.06.2019 | Power and Electrical Engineering