In a standard biology textbook, cells tend to look more or less the same from all sides. But in real life cells have fronts and backs, tops and bottoms, and they orient many of their structures according to this polarity explaining, for example, why yeast cells bud at one end and not the other.
Membrane-bound Cdc42 (shown in green) is a key regulator of cell polarity in yeast. A process guided by filaments concentrates Cdc42 molecules in one spot – the spot where the bud will emerge. Credit: Image: Courtesy of Sarah Smith, Stowers Institute for Medical Research
Over the last few years, Rong Li, Ph.D., and her team at the Stowers Institute for Medical Research have figured out many important details of the basic biochemical mechanism that establishes cell polarity in yeast. Now, using cutting-edge microscopy and advanced mathematics, the team has discovered a surprising new twist. In the March issue of Nature Cell Biology, predoctoral researcher Arupratan Das, Li, and five colleagues report that, in yeast, an enzyme literally flips a switch by moving molecules called phospholipids from the outer to the inner layer of the cell membrane.
What's more, all the molecules involved in this intricate mechanism are found not just in yeast, but in mammalian cells as well. That opens up new avenues for exploring how cell polarity is created in, say, liver cells, and whether or not glitches in the mechanism can contribute to disease. "Cell polarity is critical for the specialized function of the vast majority of cells," explains Li, who is also a professor in the Department of Molecular and Integrative Physiology at the University of Kansas Medical Center. "Our finding could lead to a lot of clues mechanistically. We're hoping that others will pick up on our discovery and apply it to the cells they study."
Several decades ago, scientists thought that cell polarity might result from external cues—such as spatially localized chemical signals outside cells that tell the cells how to move and behave. However, researchers have also long noticed that without such localized signals cells can still polarize suggesting that the ability to polarize and bud is innate in the cell.
Li's team uncovered an important clue to the underlying process. Embedded in the cell membrane is a molecule, named Cdc42, that acts as a key regulator. In a non-polarized cell, Cdc42 is randomly distributed around the membrane, like stones randomly set in a brick wall. It also floats around within the cell.
When activated, Cdc42 stimulates the formation of a skeleton of microfilaments that guide free-floating Cdc42 towards the Cdc42 already in the membrane. Some parts of the membrane start out with a bit more Cdc42 than others and the process guided by the microfilaments concentrates the molecule in those areas. Eventually, cells ends up with a high concentration of Cdc42 in one spot—the spot where the bud will emerge.
Of course it isn't that simple. Membrane-bound Cdc42 can diffuse away but can also be pulled out of the membrane by another molecule named Rdi1and then recycled back to the same spot on the membrane. The speed of the recycling determines how big the eventual spot will be, which directly affects the shape of the bud that grows out.
Imagine ants in a ditch, says Li. They keep running out. To keep them there, you pick them up and put them back. If your hands are fast, you can contain them in a very small area. If your hands are slow, the ants spread out more. It's the same in the yeast cell. Faster recycling of Cdc42 results in a smaller spot on the cell; slower recycling causes a bigger spot. In a 2009 paper, Li's team showed that the recycling process can be fast or slow.
So what controls the speed of Cdc42 dissociation and recycling? Li and her colleagues tackled the question by looking for genes that, when knocked out, affect the speed. They found one that slowed things way down. It was a big surprise. "It wasn't something we were envisioning," says Li. In fact, she wasn't even sure if her team would pursue it. The reason: The gene was for a type of an enzyme known as a lipid flippase, which literally flips lipids from one side of cell membranes to the other. And lipids are "really messy and hard to work with," she says. Predoctoral researcher Arupratan Das, however, was willing to take it on. "I have to give Das a lot of credit—he's fearless," says Li.
Using cutting-edge fluorescence fluctuation spectroscopy, Das and his colleagues were able to chart the movement of molecules in live yeast cells, and figure out the role of the flippase. Here's what they found:
Near one end of the Cdc42 molecule is a patch with a net positive electrical charge. The cell membrane has a negative charge. As a result, the positively-charged patch of Cdc42 acts like a piece of Velcro, holding the molecule close to the membrane, allowing a lipid anchor at the end of Cdc42 to be stably inserted in the membrane. To pull out the Cdc42 for recycling, Rdi1 must grab this anchor. "Rdi1 cannot go into the membrane, so it needs the Velcro to be loosened," Li explains.
That's where the flippase enzyme comes in. The enzyme was known to flip a charge-neutral phospholipid to the inner layer of the membrane. The membrane thus becomes less negatively charged, allowing the Cdc42 anchor to slip out more easily. It's an example of how "a simple physical interaction can regulate the complex morphogenetic outcome observed during cell polarization," explains Das.
Case closed? Not quite. The researchers were hopeful that they'd uncovered the mechanism based upon their observations with living cells. But in a living cell "it's hard to rule out the effects of something else," says Li. So Das painstakingly created small bits of man-made, reconstituted membrane to test the mechanism. "It was a great challenge and required much troubleshooting before we performed it successfully," he recalls. After a year of effort, it worked. Using an imaging technique called total internal reflection fluorescence microscopy, the team was able to show that the charge of the membrane does indeed determine how fast Cdc42 can be pulled out by Rdi1.
The next challenge will be figuring out what controls the flippase. "There are some hints that it gets even messier—that the flippase may be regulated by another kind of lipid in the membrane and perhaps other enzymes," says Li. But the work in the new paper is already opening the door to a better understanding of the development of cell polarity in all types of cells. And it points to the power of new experimental tools and mathematical analysis that can help track and count molecules in cells, says Li.
"What the study really highlights is the future of cell biology—the ability to make these very accurate biochemical and biophysical measurements in single live cells and reconstituted systems, rather than using traditional bulk biochemical assays," says Li.
Researchers who also contributed to the study include Brian D. Slaughter, Jay R. Unruh, William D. Bradford, Richard Alexander and Boris Rubinstein at the Stowers Institute for Medical Research.
The work was part of a project funded by the National Institute of General Medical Sciences.About the Stowers Institute for Medical Research
Currently the Institute is home to over 500 researchers and support personnel; over 20 independent research programs; and more than a dozen technology development and core facilities. Learn more about the Institute at http://www.stowers.org
Kristin Kessler | EurekAlert!
When predictions of theoretical chemists become reality
22.05.2020 | Technische Universität Dresden
From artificial meat to fine-tuning photosynthesis: Food System Innovation – and how to get there
20.05.2020 | Potsdam-Institut für Klimafolgenforschung
Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.
When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...
Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.
Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...
Scientists took a leukocyte as the blueprint and developed a microrobot that has the size, shape and moving capabilities of a white blood cell. Simulating a blood vessel in a laboratory setting, they succeeded in magnetically navigating the ball-shaped microroller through this dynamic and dense environment. The drug-delivery vehicle withstood the simulated blood flow, pushing the developments in targeted drug delivery a step further: inside the body, there is no better access route to all tissues and organs than the circulatory system. A robot that could actually travel through this finely woven web would revolutionize the minimally-invasive treatment of illnesses.
A team of scientists from the Max Planck Institute for Intelligent Systems (MPI-IS) in Stuttgart invented a tiny microrobot that resembles a white blood cell...
By studying the chemical elements on Mars today -- including carbon and oxygen -- scientists can work backwards to piece together the history of a planet that once had the conditions necessary to support life.
Weaving this story, element by element, from roughly 140 million miles (225 million kilometers) away is a painstaking process. But scientists aren't the type...
Study co-led by Berkeley Lab reveals how wavelike plasmons could power up a new class of sensing and photochemical technologies at the nanoscale
Wavelike, collective oscillations of electrons known as "plasmons" are very important for determining the optical and electronic properties of metals.
19.05.2020 | Event News
07.04.2020 | Event News
06.04.2020 | Event News
25.05.2020 | Medical Engineering
25.05.2020 | Information Technology
25.05.2020 | Information Technology