Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Workplace ergonomics: Camera identifies unhealthy movements

09.05.2017

“Attention: Movement causes back pain” – this could be the warning of a future digital assistant. Researchers in Hannover are about to develop a camera system which observes assembly workers and warns them of unergonomic movements. Companies can use the system to maintain their employees’ productivity permanently. The researchers are still looking for partner companies to carry out first field tests.

Back pain, knee problems, tenosynovitis: Wrong movements at work may cause permanent illness. To protect workers, researchers from Hannover are currently developing an ergonomics evaluation method: 3D cameras are to identify movement patterns and help correct unhealthy postures.


In order that workers stay healthy as long as possible, ergonomic movements are of great importance. Researchers of Hannover are developing a system which identifies and corrects unhealthy postures.

(Photo: Department for Business, Innovation and Skills / Creative Commons)


Workplace ergonomics: Even delicate work can cause physical strain. Direct feedback shall help training healthy movement patterns and, for example, prevent back pain.

(Photo: CC0 Public Domain)

What is special about the new approach: The ergonomics evaluation is exclusively based on real-time camera data. Up to now, it is very complicated to analyse and assess movement patterns in the daily work routine of a factory.

The workers have to wear full length body suits with markers, so that the computer can recognize the position of hands, elbows and shoulders. This is inconvenient during work. In contrast, the new system is projected to go entirely without markers and sensors and just uses 3D cameras to identify body and hands.

... more about:
»3D »IFA »camera system »movement

In addition, the novel technology is able to analyse and evaluate movements immediately. State-of-the-art systems can just tape and process videos. Afterwards, an expert has to evaluate the video tape, in order to assess the ergonomics of the movements. This is expensive for the companies and unfavourable for the workers, since they have to wait for a feedback for days or even weeks. The new camera system is able to analyse movements automatically – in real time. It identifies unergonomic movements and also proposes alternatives. In this way, workers get direct feedback and can correct their unhealthy movements or postures immediately.

With the new system, companies are in the position to maintain the workforce of their staff permanently. Correct movements can be practised already during the initial job training and are checked consistently. In this way, assembly workers keep much longer fit, get less quickly tired and fall less frequently sick – an important factor for companies in times where responsibility for workers health may become expensive.

The new technology makes ergonomics evaluation also profitable for small and medium-sized companies. Since no full motion capturing body suit or inertia sensors or even an expert assessment are required, evaluation may well come at a lower price. Another advantage is that just one camera system is needed to evaluate all assembly workplaces. “We are developing a mobile system. As soon as a worker has adopted the correct movements, the cameras can be removed and installed at another assembly workplace”, says Sebastian Brede, project manager at the Institut für Integrierte Produktion Hannover gGmbH (IPH).

Within the scope of the research project “WorkCam – Real-time-capable camera-based ergonomics assessment and development of measures for the assembly process”, IPH is cooperating with the Institute of Production Systems and Logistics (IFA) of Leibniz Universität Hannover.

While researchers at IFA are concentrating on ergonomics assessment, IPH is responsible for the development of the camera system and the evaluation of 3D data. The project has started on 1 April 2017 and will continue until end of March 2019 – by then, the researchers want to develop a prototype of the camera system and get it tested with partner companies.

Companies interested in ergonomics evaluation, who want to test the system in the field, have still the opportunity to participate in the project. Please contact Sebastian Brede under (0511) 279 76-225 or send an email to brede@iph-hannover.de.

Further information on the research project

http://www.workcam.iph-hannover.de

Susann Reichert | idw - Informationsdienst Wissenschaft
Further information:
http://www.iph-hannover.de

Further reports about: 3D IFA camera system movement

More articles from Information Technology:

nachricht Researchers move closer to completely optical artificial neural network
23.07.2018 | The Optical Society

nachricht Reversing cause and effect is no trouble for quantum computers
20.07.2018 | Centre for Quantum Technologies at the National University of Singapore

All articles from Information Technology >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Future electronic components to be printed like newspapers

A new manufacturing technique uses a process similar to newspaper printing to form smoother and more flexible metals for making ultrafast electronic devices.

The low-cost process, developed by Purdue University researchers, combines tools already used in industry for manufacturing metals on a large scale, but uses...

Im Focus: First evidence on the source of extragalactic particles

For the first time ever, scientists have determined the cosmic origin of highest-energy neutrinos. A research group led by IceCube scientist Elisa Resconi, spokesperson of the Collaborative Research Center SFB1258 at the Technical University of Munich (TUM), provides an important piece of evidence that the particles detected by the IceCube neutrino telescope at the South Pole originate from a galaxy four billion light-years away from Earth.

To rule out other origins with certainty, the team led by neutrino physicist Elisa Resconi from the Technical University of Munich and multi-wavelength...

Im Focus: Magnetic vortices: Two independent magnetic skyrmion phases discovered in a single material

For the first time a team of researchers have discovered two different phases of magnetic skyrmions in a single material. Physicists of the Technical Universities of Munich and Dresden and the University of Cologne can now better study and understand the properties of these magnetic structures, which are important for both basic research and applications.

Whirlpools are an everyday experience in a bath tub: When the water is drained a circular vortex is formed. Typically, such whirls are rather stable. Similar...

Im Focus: Breaking the bond: To take part or not?

Physicists working with Roland Wester at the University of Innsbruck have investigated if and how chemical reactions can be influenced by targeted vibrational excitation of the reactants. They were able to demonstrate that excitation with a laser beam does not affect the efficiency of a chemical exchange reaction and that the excited molecular group acts only as a spectator in the reaction.

A frequently used reaction in organic chemistry is nucleophilic substitution. It plays, for example, an important role in in the synthesis of new chemical...

Im Focus: New 2D Spectroscopy Methods

Optical spectroscopy allows investigating the energy structure and dynamic properties of complex quantum systems. Researchers from the University of Würzburg present two new approaches of coherent two-dimensional spectroscopy.

"Put an excitation into the system and observe how it evolves." According to physicist Professor Tobias Brixner, this is the credo of optical spectroscopy....

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Leading experts in Diabetes, Metabolism and Biomedical Engineering discuss Precision Medicine

13.07.2018 | Event News

Conference on Laser Polishing – LaP: Fine Tuning for Surfaces

12.07.2018 | Event News

11th European Wood-based Panel Symposium 2018: Meeting point for the wood-based materials industry

03.07.2018 | Event News

 
Latest News

Detecting damage in non-magnetic steel with the help of magnetism

23.07.2018 | Materials Sciences

Researchers move closer to completely optical artificial neural network

23.07.2018 | Information Technology

Enabling technology in cell-based therapies: Scale-up, scale-out or program in-place

23.07.2018 | Health and Medicine

VideoLinks
Science & Research
Overview of more VideoLinks >>>