Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Hardware-software co-design approach could make neural networks less power hungry

20.12.2018

A team led by the University of California San Diego has developed a neuroinspired hardware-software co-design approach that could make neural network training more energy-efficient and faster. Their work could one day make it possible to train neural networks on low-power devices such as smartphones, laptops and embedded devices.

The advance is described in a paper published recently in Nature Communications.

Training neural networks to perform tasks like recognize objects, navigate self-driving cars or play games eats up a lot of computing power and time.


A UC San Diego-led team has developed hardware and algorithms that could cut energy use and time when training a neural network.

Credit: David Baillot/UC San Diego Jacobs School of Engineering

Large computers with hundreds to thousands of processors are typically required to learn these tasks, and training times can take anywhere from weeks to months.

That's because doing these computations involves transferring data back and forth between two separate units--the memory and the processor--and this consumes most of the energy and time during neural network training, said senior author Duygu Kuzum, a professor of electrical and computer engineering at the Jacobs School of Engineering at UC San Diego.

To address this problem, Kuzum and her lab teamed up with Adesto Technologies to develop hardware and algorithms that allow these computations to be performed directly in the memory unit, eliminating the need to repeatedly shuffle data.

"We are tackling this problem from two ends--the device and the algorithms--to maximize energy efficiency during neural network training," said first author Yuhan Shi, an electrical engineering Ph.D. student in Kuzum's research group at UC San Diego.

The hardware component is a super energy-efficient type of non-volatile memory technology--a 512 kilobit subquantum Conductive Bridging RAM (CBRAM) array. It consumes 10 to 100 times less energy than today's leading memory technologies.

The device is based on Adesto's CBRAM memory technology--it has primarily been used as a digital storage device that only has '0' and '1' states, but Kuzum and her lab demonstrated that it can be programmed to have multiple analog states to emulate biological synapses in the human brain. This so-called synaptic device can be used to do in-memory computing for neural network training.

"On-chip memory in conventional processors is very limited, so they don't have enough capacity to perform both computing and storage on the same chip.

But in this approach, we have a high capacity memory array that can do computation related to neural network training in the memory without data transfer to an external processor. This will enable a lot of performance gains and reduce energy consumption during training," said Kuzum.

Kuzum, who is affiliated with the Center for Machine-Integrated Computing and Security at UC San Diego, led efforts to develop algorithms that could be easily mapped onto this synaptic device array.

The algorithms provided even more energy and time savings during neural network training.

The approach uses a type of energy-efficient neural network, called a spiking neural network, for implementing unsupervised learning in the hardware.

On top of that, Kuzum's team applies another energy-saving algorithm they developed called "soft-pruning," which makes neural network training much more energy efficient without sacrificing much in terms of accuracy.

Energy-saving algorithms

Neural networks are a series of connected layers of artificial neurons, where the output of one layer provides the input to the next. The strength of the connections between these layers is represented by what are called "weights." Training a neural network deals with updating these weights.

Conventional neural networks spend a lot of energy to continuously update every single one of these weights. But in spiking neural networks, only weights that are tied to spiking neurons get updated. This means fewer updates, which means less computation power and time.

The network also does what's called unsupervised learning, which means it can essentially train itself. For example, if the network is shown a series of handwritten numerical digits, it will figure out how to distinguish between zeros, ones, twos, etc.

A benefit is that the network does not need to be trained on labeled examples--meaning it does not need to be told that it's seeing a zero, one or two--which is useful for autonomous applications like navigation.

To make training even faster and more energy-efficient, Kuzum's lab developed a new algorithm that they dubbed "soft-pruning" to implement with the unsupervised spiking neural network.

Soft-pruning is a method that finds weights that have already matured during training and then sets them to a constant non-zero value. This stops them from getting updated for the remainder of the training, which minimizes computing power.

Soft-pruning differs from conventional pruning methods because it is implemented during training, rather than after. It can also lead to higher accuracy when a neural network puts its training to the test.

Normally in pruning, redundant or unimportant weights are completely removed. The downside is the more weights you prune, the less accurate the network performs during testing. But soft-pruning just keeps these weights in a low energy setting, so they're still around to help the network perform with higher accuracy.

Hardware-software co-design to the test

The team implemented the neuroinspired unsupervised spiking neural network and the soft-pruning algorithm on the subquantum CBRAM synaptic device array. They then trained the network to classify handwritten digits from the MNIST database.

In tests, the network classified digits with 93 percent accuracy even when up to 75 percent of the weights were soft pruned. In comparison, the network performed with less than 90 percent accuracy when only 40 percent of the weights were pruned using conventional pruning methods.

In terms of energy savings, the team estimates that their neuroinspired hardware-software co-design approach can eventually cut energy use during neural network training by two to three orders of magnitude compared to the state of the art.

"If we benchmark the new hardware to other similar memory technologies, we estimate our device can cut energy consumption 10 to 100 times, then our algorithm co-design cuts that by another 10. Overall, we can expect a gain of a hundred to a thousand fold in terms of energy consumption following our approach," said Kuzum.

Moving forward, Kuzum and her team plan to work with memory technology companies to advance this work to the next stages. Their ultimate goal is to develop a complete system in which neural networks can be trained in memory to do more complex tasks with very low power and time budgets.

###

Paper title: "Neuroinspired Unsupervised Learning and Pruning with Subquantum CBRAM arrays." Co-authors include Leon Nguyen, Sangheon Oh and Xin Liu, UC San Diego; and Foroozan Koushan and John R. Jameson, Adesto Technologies Corporation.

This work was supported by the National Science Foundation (ECCS-1752241, ECCS-1734940) and the Office of Naval Research (Young Investigator Award N00014161253).

Media Contact

Liezel Labios
llabios@ucsd.edu
858-246-1124

 @UCSanDiego

http://www.ucsd.edu 

Liezel Labios | EurekAlert!
Further information:
http://jacobsschool.ucsd.edu/news/news_releases/release.sfe?id=2692
http://dx.doi.org/10.1038/s41467-018-07682-0

More articles from Information Technology:

nachricht Drones shown to make traffic crash site assessments safer, faster and more accurate
17.01.2019 | Purdue University

nachricht Next generation photonic memory devices are light-written, ultrafast and energy efficient
15.01.2019 | Eindhoven University of Technology

All articles from Information Technology >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Ten-year anniversary of the Neumayer Station III

The scientific and political community alike stress the importance of German Antarctic research

Joint Press Release from the BMBF and AWI

The Antarctic is a frigid continent south of the Antarctic Circle, where researchers are the only inhabitants. Despite the hostile conditions, here the Alfred...

Im Focus: Ultra ultrasound to transform new tech

World first experiments on sensor that may revolutionise everything from medical devices to unmanned vehicles

The new sensor - capable of detecting vibrations of living cells - may revolutionise everything from medical devices to unmanned vehicles.

Im Focus: Flying Optical Cats for Quantum Communication

Dead and alive at the same time? Researchers at the Max Planck Institute of Quantum Optics have implemented Erwin Schrödinger’s paradoxical gedanken experiment employing an entangled atom-light state.

In 1935 Erwin Schrödinger formulated a thought experiment designed to capture the paradoxical nature of quantum physics. The crucial element of this gedanken...

Im Focus: Nanocellulose for novel implants: Ears from the 3D-printer

Cellulose obtained from wood has amazing material properties. Empa researchers are now equipping the biodegradable material with additional functionalities to produce implants for cartilage diseases using 3D printing.

It all starts with an ear. Empa researcher Michael Hausmann removes the object shaped like a human ear from the 3D printer and explains:

Im Focus: Elucidating the Atomic Mechanism of Superlubricity

The phenomenon of so-called superlubricity is known, but so far the explanation at the atomic level has been missing: for example, how does extremely low friction occur in bearings? Researchers from the Fraunhofer Institutes IWM and IWS jointly deciphered a universal mechanism of superlubricity for certain diamond-like carbon layers in combination with organic lubricants. Based on this knowledge, it is now possible to formulate design rules for supra lubricating layer-lubricant combinations. The results are presented in an article in Nature Communications, volume 10.

One of the most important prerequisites for sustainable and environmentally friendly mobility is minimizing friction. Research and industry have been dedicated...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Our digital society in 2040

16.01.2019 | Event News

11th International Symposium: “Advanced Battery Power – Kraftwerk Batterie” Aachen, 3-4 April 2019

14.01.2019 | Event News

ICTM Conference 2019: Digitization emerges as an engineering trend for turbomachinery construction

12.12.2018 | Event News

 
Latest News

Additive manufacturing reflects fundamental metallurgical principles to create materials

18.01.2019 | Materials Sciences

How molecules teeter in a laser field

18.01.2019 | Life Sciences

The cytoskeleton of neurons has been found to be involved in Alzheimer's disease

18.01.2019 | Health and Medicine

VideoLinks
Science & Research
Overview of more VideoLinks >>>