Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

5G and AI – Synergy in the Digital Age

03.12.2019

5G is more than a fast cellular connection. 5G is a key technology in the age of digital networks. In combination with artificial intelligence, new technological possibilities will unfold for industry, commerce and society. However, before 5G becomes the universal communication platform for flexible manufacturing and the networked world, a number of technical challenges must be overcome. DFKI is responding in a variety of research activities with its broad range of competence and its involvement in groundbreaking projects and initiatives.

5G for AI – AI for 5G


5G is key technology for many applications in industry 4.0. These are tested in the SmartFactory-KL at DFKI.

SmartFactory-KL


5G-ACIA and DFKI organized the 5G Arena at the Hannover Messe 2019. Using a real 5G network, concrete showcases were presented in real operation.

DFKI

Many future-oriented technologies and AI applications depend on the transmission of large amounts of data in real-time – for example, the cooperation of humans and robots in INDUSTRIE 4.0, the communication of vehicles and traffic systems for autonomous driving, or long-distance operations in telemedicine.

5G promises speeds at least 100-times faster than the current LTE standards for minimal reaction times – much faster than those of humans. This is critical for safety functions, for example, emergency stop circuits in a wireless production environment.

However, the transmission rate and latency are not the only major prerequisites for real-time communication. An ever-increasing number of networked devices, machines, and everyday objects must operate simultaneously.

The network must be reliable and secure against failures and attacks. These are just some of the many requirements that are predestined for an artificial intelligence solution. The interplay between 5G and AI holds great potential for entirely new integrated applications and business models.

“5G provides AI systems with the necessary data in real-time. AI, in turn, uses that data to control and optimize the network. The combined advantages of these technologies will enable many new use cases in many areas.” – Prof. Dr. Hans Dieter Schotten

DFKI’s research activities are wide-ranging within a framework of publicly funded projects, strategic partnerships, and neighboring universities. The department of Intelligent Networks cooperates with the Kaiserslautern University of Technology (TUK) on pioneering 5G projects at the national and European levels and has con-tributed groundbreaking efforts in this area.

The department of Innovative Factory Systems tests the practicality of 5G technologies in partnership with the SmartFactory-KL membership at its research factory located at DFKI-Kaiserslautern. A building extension is currently ongoing there to provide additional test facilities and demonstrator areas for the 5G research being conducted in the DFKI departments.

The scientists at the DFKI Lab in the German state of Lower Saxony are working on environmental and traffic safety scenarios in coastal and port areas as well as on the monitoring and control of farm machine fleets. Other departments are investigating technologies with potential in the context of 5G, such as data processing directly in the sensors or for use in robotics and the area of ambient assisted living.

Industrie 4.0 needs 5G

“The factory of tomorrow is flexible and networked. Workplaces of the future will organize themselves (self-organizing, so to speak),” said Prof. Dr. Martin Ruskowski, head of Innovative Factory Systems research at DFKI and chairman of the Board of SmartFactory-KL.

“More and more machines, devices, and services are becoming part of the production network. The traditional communication structures are fading out, shifting more and more to a virtual environment,” added Ruskowski.

Together with AI, the 5G wireless technologies enable seamless integration of autonomous systems and mobile platforms without any cable connections, creating entirely new manufacturing methods.

“Real-time communication capability is a success factor for INDUSTRIE 4.0. 5G will significantly improve the flexibility, convertibility, and productivity of industrial manufacturing. We have a unique environment at SmartFactory-KL that allows us to test relevant use cases, to develop new concepts, and to transfer these into practical applications.” – Prof. Dr. Martin Ruskowski

Since 2018, joint presentations with SmartFactory-KL at the Hannover Messe have included: safety solutions for mobile transport systems, time-sensitive networking (TSN), edge computing as well as data transmission and processing in the Cloud via 5G.

Pioneering work at DFKI and TUK

“TUK and DFKI have been instrumental in laying the foundations for 5G and its further development in crucial projects,” said Prof. Dr. Hans Dieter Schotten, head of DFKI's Intelligent Networks research department and chair of Radio Communication and Navigation section at TUK.

The team at TUK has been involved in earlier EU 5G projects, for example, METIS, which defined the fundamental requirements for the new wireless standard and created the basic technical structures. Prof. Schotten states: “5G was virtually invented in METIS.”

METIS II is now merging the different network technologies into an integrated system and developing additional components. In leading-edge projects like 5G NORMA and 5G MONARCH, scientists are studying the adaptability of different services (network slicing) as well as their implementation in the Port of Hamburg. The BMBF- sponsored AMMCOA project has developed local networks for agricultural applications – one of the research priorities at TUK.

5G Pilot Region Kaiserslautern

The German Federal government has the stated goal of making Germany a lea-ding center for innovative services and business models on the basis of the new standard. Prior to a nation-wide development, the new wireless standard is being tested in six pilot regions. The new technologies will be developed and demonstrated in these regions.

In June, a total of EUR 44 million in funding was released for this purpose by the budget committee of the German Parliament (Bundestag). The Kaiserslautern region, where for many years DFKI and the Technical University have contributed pioneering research in this field, was chosen along with five other cities and regions.

TU Kaiserslautern will develop and operate four-campus networks in cooperation with the DFKI for the purpose of researching 5G technologies in special test scenarios as part of this large-scale project. These include INDUSTRIE 4.0 applications in the smart factory, networked mobility solutions, smart farming, and a portable system for setting up campus networks at any location.

“This region has the advantage of being a center of excellence; with its existing networks of research institutes and companies, it is ideal for bringing technolo-gies and users together. In this way, we can develop urban as well as rural and industrial scenarios in dialog with our partners and other DFKI locations,” said Prof. Hans Dieter Schotten.

Global Initiative for Industrial Standards

DFKI became a founding member of the “5G Alliance for Connected Industries and Automation” (5G-ACIA) at the German Electrical and Electronic Manufactu-rers’ Association (ZVEI) in April 2018. This international initiative unites the major players in the 5G sector – representatives of the traditional automation and manufacturing industry, as well as the leading organizations in the ICT sector.

The aim is to successfully establish 5G in industrial production systems and ensure its suitability for industrial applications from the start. To this end, ACIA is actively involved in the standardization and regulation of 5G and works to identify possible applications and requirements in the manufacturing environment.

5G-ACIA presented the first system demonstrator for 5G applications in an INDUSTRIE 4.0 context at the Hannover Messe 2019.

Groundbreaking projects:

SELFNET – Self-protecting, self-healing, self-optimizing

Today’s networks are becoming ever more complex and, correspondingly, more costly and difficult to maintain. Lead manager DFKI has used artificial intelligence for the first time in the EU SELFNET project for the autonomous control of a modern communication network that can independently protect itself against intruders or solve occurring problems, e.g., overloads. In SELFNET, DFKI realized the first complete implementation of an AI-based security and network optimization solution for mobile communications.

TACNET 4.0 – Trailblazer for INDUSTRIE 4.0

The successful digital transformation in industry requires efficient and seamless networking of factories, products, and ser vices. The aim of TACNET 4.0 is to develop 5G for indus - trial use and to create a uniform industrial – tactile – communication system. With DFKI as lead manager, the consortium sponsored by BMBF is investigating how to integrate the increasing number of players and the growing variet y of network types as well as how to reliably implement remote maintenance scenarios and control loops. TACNET 4.0 is the world's most comprehensive research project for the development of a complete industrial 5G network.

Press contact:

Christian Heyer
Head of Corporate Communications
DFKI Kaiserslautern
Deutsches Forschungszentrum für Künstliche Intelligenz GmbH (DFKI)
German Research Center for Artificial Intelligence
Trippstadter Straße 122
67663 Kaiserslautern
Phone: +49 631 20575 1710
Email: christian.heyer@dfki.de

Wissenschaftliche Ansprechpartner:

Prof. Dr.-Ing. Hans Dieter Schotten, Head of Research Department Intelligent Networks, DFKI
Prof. Dr.-Ing. Martin Ruskowski, Head of Research Department Innovative Factory Systems, DFKI

Weitere Informationen:

https://www.dfki.de/en/web/news/detail/News/5g-and-ki-synergy-in-the-digital-age... – See this press release an further information on DFKI.de

Christian Heyer DFKI Kaiserslautern | Deutsches Forschungszentrum für Künstliche Intelligenz GmbH, DFKI

More articles from Information Technology:

nachricht Big Data makes intensive care better
02.12.2019 | Schweizerischer Nationalfonds SNF

nachricht New Streaming Technology Will Change Computer Gaming
02.12.2019 | Technische Universität Graz

All articles from Information Technology >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: The coldest reaction

With ultracold chemistry, researchers get a first look at exactly what happens during a chemical reaction

The coldest chemical reaction in the known universe took place in what appears to be a chaotic mess of lasers. The appearance deceives: Deep within that...

Im Focus: How do scars form? Fascia function as a repository of mobile scar tissue

Abnormal scarring is a serious threat resulting in non-healing chronic wounds or fibrosis. Scars form when fibroblasts, a type of cell of connective tissue, reach wounded skin and deposit plugs of extracellular matrix. Until today, the question about the exact anatomical origin of these fibroblasts has not been answered. In order to find potential ways of influencing the scarring process, the team of Dr. Yuval Rinkevich, Group Leader for Regenerative Biology at the Institute of Lung Biology and Disease at Helmholtz Zentrum München, aimed to finally find an answer. As it was already known that all scars derive from a fibroblast lineage expressing the Engrailed-1 gene - a lineage not only present in skin, but also in fascia - the researchers intentionally tried to understand whether or not fascia might be the origin of fibroblasts.

Fibroblasts kit - ready to heal wounds

Im Focus: McMaster researcher warns plastic pollution in Great Lakes growing concern to ecosystem

Research from a leading international expert on the health of the Great Lakes suggests that the growing intensity and scale of pollution from plastics poses serious risks to human health and will continue to have profound consequences on the ecosystem.

In an article published this month in the Journal of Waste Resources and Recycling, Gail Krantzberg, a professor in the Booth School of Engineering Practice...

Im Focus: Machine learning microscope adapts lighting to improve diagnosis

Prototype microscope teaches itself the best illumination settings for diagnosing malaria

Engineers at Duke University have developed a microscope that adapts its lighting angles, colors and patterns while teaching itself the optimal...

Im Focus: Small particles, big effects: How graphene nanoparticles improve the resolution of microscopes

Conventional light microscopes cannot distinguish structures when they are separated by a distance smaller than, roughly, the wavelength of light. Superresolution microscopy, developed since the 1980s, lifts this limitation, using fluorescent moieties. Scientists at the Max Planck Institute for Polymer Research have now discovered that graphene nano-molecules can be used to improve this microscopy technique. These graphene nano-molecules offer a number of substantial advantages over the materials previously used, making superresolution microscopy even more versatile.

Microscopy is an important investigation method, in physics, biology, medicine, and many other sciences. However, it has one disadvantage: its resolution is...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

The Future of Work

03.12.2019 | Event News

First International Conference on Agrophotovoltaics in August 2020

15.11.2019 | Event News

Laser Symposium on Electromobility in Aachen: trends for the mobility revolution

15.11.2019 | Event News

 
Latest News

A Freiburg research team deciphers how stem cells decide their identity

03.12.2019 | Life Sciences

Packed in wax: the University of Graz develops a technology to stop bee disease

03.12.2019 | Life Sciences

The Future of Work

03.12.2019 | Event News

VideoLinks
Science & Research
Overview of more VideoLinks >>>