On behalf of the EU Commission, Fraunhofer ISI explored what contribution individual technologies can make to decarbonizing industry and how to support them. The study shows that it is possible to cut emissions by 95% by 2050. However, this requires innovative carbon-neutral technologies and comprehensive technological change – especially in basic materials industries. In addition, Fraunhofer ISI examined the role of an innovation fund to aid the market diffusion of these technologies using revenue from the EU emissions trading system.
Industry is responsible for about 20 percent of the EU-wide greenhouse gas emissions. It will have to reduce its emissions to almost zero by 2050 to meet the targets set in the Paris Agreement. The EU Commission has developed a strategic long-term vision for a climate-neutral European economy by 2050 and presented it for discussion at the Climate summit in Katowice.
On behalf of the EU Commission, the Fraunhofer Institute for Systems and Innovation Research ISI together with ICF Consulting Services Limited explored the contribution that individual technologies can make to decarbonizing industry and the possible paths that lead to this by 2050. The study “Industrial Innovation:
Pathways to deep decarbonization of Industry” focused in particular on the industrial production of basic materials like steel, cement, ethylene, ammonia and glass: These account for the majority of industrial emissions and are simultaneously especially difficult to decarbonize.
The researchers used the FORECAST simulation model developed by Fraunhofer ISI that has a high resolution of technologies and calculated eight alternative scenarios. The results show that the greenhouse gas emissions of industry could be reduced by 80 to 95 percent by 2050 compared to 1990.
All the scenarios show that an ambitious improvement of energy efficiency can lower the costs of decarbonization and contribute substantial CO2 savings, especially in the next 10 to 20 years. But this will not be enough on its own to reduce emissions to the extent needed. A crucial factor is the rapid deployment of renewable energies to produce carbon-free electricity.
This is so important because industry‘s electricity consumption could increase strongly up to 2050 – doubling or even tripling depending on the scenario. This would be the case especially if more and more electricity were to be used to generate process heat and if important processes in the chemical and steel industries were to be converted to hydrogen produced using electrolysis.
Reducing greenhouse gases by 95 percent and therefore achieving almost completely carbon-neutral industrial production by 2050 requires fundamental changes along the value chain. These include the diffusion of low-carbon cements, more efficient material use and a comprehensive recycling sector. Capturing and storing CO2 can also play a role, for example, in reducing the remaining emissions from producing cement-clinker and lime.
Supporting carbon-neutral production processes
As the study shows, the ambitious transformation required is not possible with the technologies available today and under the existing regulatory framework. Dr. Tobias Fleiter, who heads the project at Fraunhofer ISI, emphasizes “Innovative technologies must be ready for the market between 2020 and 2030, infrastructure constructed and the regulatory framework adapted.
This requires a comprehensive mix of instruments that supports the research and development of carbon-neutral production processes and the creation of niche markets for low-carbon basic products, among other things. It is key to change not just the basic materials industries themselves, but to integrate the entire value chain.
As the biggest consumer of carbon-intensive products like steel, cement and glass, the construction sector in particular should be guided by the CO2 emissions embodied in the construction materials. This is why the cost of CO2 emissions must be factored into the prices for using these products”.
One step towards developing carbon-neutral production processes is the innovation fund (IF) currently being prepared by the EU Commission: From 2021, it should use revenue from the emissions trading system to fund research and development on decarbonizing industry, among other things.
The design of the IF and its impacts on the environment and the economy formed the focal point of another study for the EU Commission by Fraunhofer ISI in cooperation with Ecofys. For the project coordinator, Professor Wolfgang Eichhammer from Fraunhofer ISI, the IF is “an important step to fostering innovative carbon-neutral industrial processes:
Despite the recent sharp increase of the CO2 price in the emissions trading system, on its own, this will not be sufficient to make these innovative technologies economically viable in the foreseeable future. This is why companies engaged in global competition are reluctant to apply these technologies on an industrial scale. Over the next one to two decades, however, the rising CO2 price will make today’s standard technologies that are based on fossil energy sources increasingly uneconomical. The IF therefore constitutes an important building block to making these technologies economical during the initial phase and to lowering the risks for companies.”
Industrial innovation: Pathways to deep decarbonization of industry
- Part 1: Evaluation of innovations and technologies under development: https://ec.europa.eu/clima/sites/clima/files/strategies/2050/docs/industrial_inn...
- Part 2: Development and analysis of scenarios of possible decarbonization paths up to 2050: https://ec.europa.eu/clima/sites/clima/files/strategies/2050/docs/industrial_inn...
- Data annex to part 2: https://www.isi.fraunhofer.de/content/dam/isi/dokumente/cce/2019/IndustryInnovat...
- Project website: https://www.isi.fraunhofer.de/en/competence-center/energietechnologien-energiesy...
Impact on the Environment and the Economy of Technological Innovations for the Innovation Fund: https://publications.europa.eu/en/publication-detail/-/publication/669226c7-b6ff...
Fraunhofer ISI’s simulation model FORECAST: https://www.forecast-model.eu/forecast-en/index.php
EU Commission’s 2050 Long-Term Strategy: https://ec.europa.eu/clima/policies/strategies/2050_en#tab-0-1
Head of Press and Communications
Fraunhofer Institute for Systems and Innovation Research ISI
Breslauer Strasse 48
Phone +49 721 6809-100
The Fraunhofer Institute for Systems and Innovation Research ISI analyzes the origins and impacts of innovations. We research the short- and long-term developments of innovation processes and the impacts of new technologies and services on society. On this basis, we are able to provide our clients from industry, politics and science with recommendations for action and perspectives for key decisions. Our expertise is founded on our scientific competence as well as an interdisciplinary and systemic research approach.
Dr. Tobias Fleiter
Coordinator of Business Unit Demand Analyses and Projections
Phone +49 721 6809-208
Anne-Catherine Jung | Fraunhofer-Institut für System- und Innovationsforschung (ISI)
Emissions from road construction could be halved using today’s technology
18.05.2020 | Schwedischer Forschungsrat - The Swedish Research Council
When every particle counts: IOW develops comprehensive guidelines for microplastic extraction from environmental samples
11.05.2020 | Leibniz-Institut für Ostseeforschung Warnemünde
In living cells, enzymes drive biochemical metabolic processes enabling reactions to take place efficiently. It is this very ability which allows them to be used as catalysts in biotechnology, for example to create chemical products such as pharmaceutics. Researchers now identified an enzyme that, when illuminated with blue light, becomes catalytically active and initiates a reaction that was previously unknown in enzymatics. The study was published in "Nature Communications".
Enzymes: they are the central drivers for biochemical metabolic processes in every living cell, enabling reactions to take place efficiently. It is this very...
Early detection of tumors is extremely important in treating cancer. A new technique developed by researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from normal tissue. The work is published May 25 in the journal Nature Nanotechnology.
researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from...
Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.
When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...
Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.
Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...
Scientists took a leukocyte as the blueprint and developed a microrobot that has the size, shape and moving capabilities of a white blood cell. Simulating a blood vessel in a laboratory setting, they succeeded in magnetically navigating the ball-shaped microroller through this dynamic and dense environment. The drug-delivery vehicle withstood the simulated blood flow, pushing the developments in targeted drug delivery a step further: inside the body, there is no better access route to all tissues and organs than the circulatory system. A robot that could actually travel through this finely woven web would revolutionize the minimally-invasive treatment of illnesses.
A team of scientists from the Max Planck Institute for Intelligent Systems (MPI-IS) in Stuttgart invented a tiny microrobot that resembles a white blood cell...
19.05.2020 | Event News
07.04.2020 | Event News
06.04.2020 | Event News
29.05.2020 | Materials Sciences
29.05.2020 | Materials Sciences
29.05.2020 | Power and Electrical Engineering