Smart Shear from Siemens VAI – a New Hydraulically Operated Plate Shear for Improved Cutting Quality and Increased Cutting Speed

Due to the rising demand for high-strength types of steel and for plates with a greater thickness and width, the requirements placed on plate mill shears have increased dramatically. The shears and their components are being subjected to much greater forces. At the same time, uneven cuts or imprecisely cut edges have to be avoided. The mechanically operated shears available on the market are at the limit of their capabilities.

In the case of Smart Shear, servo-controlled hydraulic cylinders are used on both sides of the shears in order to operate the top blade. A rolling cut action is therefore possible without the gears, shafts and cranks needed for mechanical shears. The top knife and the bottom knife are mounted directly on the blade beams. This reduces the number of moving parts and thus susceptibility to wear as well as the need for maintenance. Simulations have demonstrated a considerably better control of cutting angle and blade overlap compared to mechanical shears. The servo-controlled movement of the shears ensures that the correct cutting angle is achieved for all plate thicknesses.

The blade overlap is kept practically constant over the entire width of the plate. This improves the cutting quality. Moreover, the blade overlap can easily be adapted to the optimum value for the respective thickness and width by means of the control software. In addition, the Smart Shear concept enables higher cutting speeds than mechanical shears. The cutting speed of mechanical shears cannot easily be increased because the larger torque needed for increasing the speed requires a design that, in turn, increases the inertia of the drive system.

In order to improve operational flexibility, Smart Shear is equipped with two pairs of hydraulic cylinders. Both pairs of cylinders are used at the same time for cutting high-strength or thick metal plates. When thin plates or lower-strength material has to be cut, only one pair of cylinders is used. The cutting speed can easily be adapted to the requirements in each case.

The hydraulic cylinders are operated in tension. As a result, the vertical forces are constrained within the top and bottom knife beams and the cylinders. The side frames are not subjected to the vertical forces. They only have to withstand the horizontal blade forces and thus can be much lighter.

The Siemens Industry Sector (Erlangen, Germany) is the world's leading supplier of production, transportation and building systems. Integrated hardware and software technologies combined with comprehensive industry-specific solutions enable Siemens to enhance the productivity and efficiency of its customers in industry and infrastructure. The Sector comprises six Divisions: Building Technologies, Industry Automation, Industry Solutions, Mobility, Drive Technologies and Osram. In fiscal 2007 (ended September 30), Siemens Industry generated sales of approximately EUR40 billion (pro forma, unconsolidated) with around 209,000 employees worldwide.

With the business activities of Siemens VAI Metal Technologies, (Linz, Austria), Siemens Water Technologies (Warrendale, Pa., U.S.A.), and Industry Technologies, (Erlangen, Germany), the Siemens Industry Solutions Division (Erlangen, Germany) is one of the world's leading solution and service providers for industrial and infrastructure facilities.

Using its own products, systems and process technologies, Industry Solutions develops and builds plants for end customers, commissions them and provides support during their entire life cycle.

Media Contact

Dr. Rainer Schulze Siemens Industry Solutions

All latest news from the category: Machine Engineering

Machine engineering is one of Germany’s key industries. The importance of this segment has led to the creation of new university degree programs in fields such as production and logistics, process engineering, vehicle/automotive engineering, production engineering and aerospace engineering among others.

innovations-report offers informative reports and articles covering technologies such as automation, motion, power train, energy, conveyor, plastics, lightweight construction, logistics/warehousing, measurement systems, machine tools and control engineering.

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors