Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Synthetic gas instead of fossil energy

07.04.2020

There is one major challenge in converting our energy system to purely renewable energy sources: winter – or rather the supply gap at this time. The conversion of surplus summer electricity into synthetic gas offers a way of ensuring that renewable energy could be available in sufficient quantities during the winter months. It would also allow to operate long-distance trucks. The Canton of Zurich has great interest in replacing fossil fuels with renewable energies and is, therefore, providing financial support for the Empa's "Power-to-gas" project.

The call to abandon fossil fuels altogether is becoming ever louder, not just in Switzerland but also in the EU and numerous other countries. While a number of projects trying to implement this shift in our energy systems are already underway or in planning in many sectors, there are challenges, for which clear and practicable solutions are still lacking.


Refuelling of a gas vehicle at the "move" future mobility demonstrator at Empa.

Empa

One of these is to supply Switzerland with renewable energy in wintertime; another one is to convert long-distance, heavy and air traffic to renewable fuels.

An ongiong research project at Empa is looking into the production of synthetic methane. The Canton of Zurich is now supporting the project with a total of CHF 500,000 from the framework credit to support pilot projects in the energy sector.

Using existing transport systems

Synthetic methane can be produced from renewable electricity and carbon dioxide (CO2) and easily transported via the gas grid. The infrastructure is thus in place, as are trading mechanisms, standards and expertise. This makes it one of the few options for supplying Switzerland with renewable energy during winter.

Synthetic methane can also be used in liquid form as an alternative to diesel for long-distance cargo transport, and it enables the electricity, heating and transport sectors to be linked. Research into the production of synthetic methane also serves as a basis for the development of synthetic kerosene, which should enable CO2-neutral air travel in the future.

"It is a key question for protecting our climate: How can we make surplus solar energy from summertime available all year round in order to become CO2-free – especially in transport," says Martin Neukom, Head of the Building Department of the Canton of Zurich.

Although the conversion of renewable electricity into synthetic methane is not new, various fundamentals are still missing for the classification and comparative evaluation of future energy supply and mobility concepts.

Brigitte Buchmann, member of Empa's Board of Directors and strategic project leader, stresses that developing reliable energy-related and economic data is, therefore, a main focus of the project. "The project consortium consists of partners covering the entire value chain, i.e. from Empa researchers to energy suppliers, fueling station and fleet operators all the way to industrial partners in the technology sector."

Empa fueling station with synthetic methane

The goal of the project is to expand "move" – Empa's future mobility demonstrator, where various electric and hydrogen mobility projects are already underway – to include a production facility for synthetic methane by 2021.

At the connected fueling station, trucks provided by a project partner can be refuelled with CO2-neutral, synthetic methane. A process developed at Empa will be used to produce this methane. In parallel, the researchers will investigate cost structures and develop economic models, which can serve as a basis for decision makers to shape the framework conditions for future post-fossil mobility.

The project consortium is thus supporting efforts to gradually replace fossil fuels with sustainably produced renewable energy carriers. The financial commitment of the Canton of Zurich and various industrial partners shows that there is great interest in such solutions.

Wissenschaftliche Ansprechpartner:

Christian Bach
Automotive Powertrain Technologies
Phone +41 58 765 41 37
christian.bach@empa.ch

Weitere Informationen:

https://www.empa.ch/web/move/overview Empa mobility demonstrator "move"
https://www.empa.ch/web/s604/move-mega Empa media release

Rainer Klose | Empa - Eidgenössische Materialprüfungs- und Forschungsanstalt

More articles from Power and Electrical Engineering:

nachricht A spreadable interlayer could make solid state batteries more stable
19.05.2020 | Chalmers University of Technology

nachricht A new, highly sensitive chemical sensor uses protein nanowires
14.05.2020 | University of Massachusetts Amherst

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: I-call - When microimplants communicate with each other / Innovation driver digitization - "Smart Health“

Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.

When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...

Im Focus: When predictions of theoretical chemists become reality

Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.

Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...

Im Focus: Rolling into the deep

Scientists took a leukocyte as the blueprint and developed a microrobot that has the size, shape and moving capabilities of a white blood cell. Simulating a blood vessel in a laboratory setting, they succeeded in magnetically navigating the ball-shaped microroller through this dynamic and dense environment. The drug-delivery vehicle withstood the simulated blood flow, pushing the developments in targeted drug delivery a step further: inside the body, there is no better access route to all tissues and organs than the circulatory system. A robot that could actually travel through this finely woven web would revolutionize the minimally-invasive treatment of illnesses.

A team of scientists from the Max Planck Institute for Intelligent Systems (MPI-IS) in Stuttgart invented a tiny microrobot that resembles a white blood cell...

Im Focus: NASA's Curiosity rover finds clues to chilly ancient Mars buried in rocks

By studying the chemical elements on Mars today -- including carbon and oxygen -- scientists can work backwards to piece together the history of a planet that once had the conditions necessary to support life.

Weaving this story, element by element, from roughly 140 million miles (225 million kilometers) away is a painstaking process. But scientists aren't the type...

Im Focus: Making quantum 'waves' in ultrathin materials

Study co-led by Berkeley Lab reveals how wavelike plasmons could power up a new class of sensing and photochemical technologies at the nanoscale

Wavelike, collective oscillations of electrons known as "plasmons" are very important for determining the optical and electronic properties of metals.

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Dresden Nexus Conference 2020: Same Time, Virtual Format, Registration Opened

19.05.2020 | Event News

Aachen Machine Tool Colloquium AWK'21 will take place on June 10 and 11, 2021

07.04.2020 | Event News

International Coral Reef Symposium in Bremen Postponed by a Year

06.04.2020 | Event News

 
Latest News

Inexpensive retinal diagnostics via smartphone

25.05.2020 | Medical Engineering

Smart machine maintenance: New AI system also detects unknown faults

25.05.2020 | Information Technology

Artificial Intelligence for optimized mobile communication

25.05.2020 | Information Technology

VideoLinks
Science & Research
Overview of more VideoLinks >>>