Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Siemens wins major HVDC order in Canada


Siemens has received an order for a high-voltage direct-current (HVDC) power transmission link in Canada.

After the commissioning - planned for 2018 - the approximately 1,400 kilometers long HVDC link Bipole III will connect the Keewatinohk Converter Station, in northern Manitoba, with the Riel Converter Station, close to the provincial capital Winnipeg, by a +/-500 kilovolt (kV) overhead line. The picture shows the converter station of a comparable project in Australia.

In a consortium with the construction company Mortenson Construction, Siemens will be supplying both converter stations for the Bipole III HVDC project. Customer is provincially-owned Manitoba Hydro. Siemens is supplying the complete HVDC core technology, based on the well-proven thyristor-technology, while Mortensen Construction will be responsible for the construction of the converter stations.

This HVDC link of approximately 1,400 kilometers will connect the Keewatinohk Converter Station, in northern Manitoba near Hudson Bay with the Riel Converter Station, close to the provincial capital Winnipeg in the south of the province, by a +/-500 kilovolt (kV) overhead line. The order is valued at more than CAD 800 million for the consortium. Once it has been commissioned in the summer of 2018, the Bipole III HVDC link will have a transmission capacity of 2,300 megawatts (MW).

This new HVDC link will enhance Manitoba Hydro's existing HVDC system by increasing overall system reliability. This HVDC link will transport electricity generated by hydroelectric generating stations in the northern part of the province with low losses to southern load centers and Winnipeg. "When it comes to energy-efficient and low-loss transmission of high ratings of electricity over considerable distances, we're the right partner. Siemens is a leading provider of HVDC technology and with our partner who has the necessary local expertise in the construction we can offer systems tailored to our customers' requirements", says Karl Uecker, head of the business segments for HVDC and FACTS solutions within the Siemens Division Energy Management.

The scope of the contract includes the design, engineering, manufacturing, supply and commissioning of all HVDC core components, such as converter valves with direct light-triggered power thyristors, converter transformers, smoothing reactors, protection and I&C equipment, and AC and DC filters. A particular challenge posed by this project is the need to design the system with all its equipment for temperatures as low as -50 degrees Celsius. This new HVDC link will bolster the power supply grid in the province and ensure that the rising demand for energy is met by linking further environmentally-friendly hydro power plants to the power grid.

HVDC transmission is always the technology of choice when conventional methods of energy transport using alternating current reach their technical and economic limits. Compared to a similar three-phase line the transmission losses with an HVDC link are 30 to 40 percent less. The use of HVDC transmission always makes sense when electricity is produced at locations other than where it is needed and must therefore be transported over vast distances to urban and industrial centers.

For further information on Energy Management, please see

Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of combined cycle turbines for power generation, a leading provider of power transmission solutions and a pioneer in infrastructure solutions and automation and software solutions for industry. The company is also a leading supplier of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2013, which ended on September 30, 2013, revenue from continuing operations totaled €75.9 billion and income from continuing operations €4.2 billion. At the end of September 2013, Siemens had around 362,000 employees worldwide on the basis of continuing operations. Further information is available on the Internet at

Reference Number: PR2014100030EMEN


Ms. Sabrina Martin
Energy Management Division

Siemens AG

Freyeslebenstr. 1

91058   Erlangen


Tel: +49 (9131) 18-7032



Industry & Economy
Event News

“3rd Conference on Laser Polishing – LaP 2018” Attracts International Experts and Users

09.11.2018 | Event News

On the brain’s ability to find the right direction

06.11.2018 | Event News

European Space Talks: Weltraumschrott – eine Gefahr für die Gesellschaft?

23.10.2018 | Event News

Latest News

Epoxy compound gets a graphene bump

14.11.2018 | Materials Sciences

Microgel powder fights infection and helps wounds heal

14.11.2018 | Health and Medicine

How algae and carbon fibers could sustainably reduce the athmospheric carbon dioxide concentration

14.11.2018 | Life Sciences

Science & Research
Overview of more VideoLinks >>>