ACOSAR: standardizing merged numerical simulation and real tests

Modular, open system architectures provide crucial support for the development of future interdisciplinary systems, from virtual design to integrated tests with real components on test stands Photo: VIRTUAL VEHICLE

Increasingly stringent statutory provisions such as Euro VI or zero-emission zones, larger urban populations, the booming Asian automobile market and constantly rising demand for individual solutions confront European vehicle manufacturers with a major challenge. Customers want an extremely diverse variety of vehicle options, which makes a time- and cost-efficient development process essential for the industry.

Real-time co-simulation

Early predictions and correspondingly early design decisions are key success factors in modern development processes. With the aid of co-simulation, diverse simulation models can be linked together to enable overall system analysis at a very early stage of development (front loading).

In vehicle development, the term “co-simulation” means an approach in which the complexity of the overall mechatronic product (the vehicle) and its surroundings is virtually modelled in a development environment. This involves linking together several domain- or department-specific components to form an interactive simulation model.

A logical extension of co-simulation, which is an offline process without real-time capability, is the integration of real-time systems. One or more components available as real hardware on suitable automated test stands (the engine, for example) are integrated directly into the existing system model. As part of the ACoRTA project, for example, the VIRTUAL VEHICLE Research Center in Graz and project partners AVL List, Porsche and TU Graz developed a new method that enables this form of hardware/software simulation in real time.

ACOSAR: a worldwide standard for real-time co-simulation

Due to the extension of co-simulation into the real-time domain, it is possible to apply the co-simulation approach throughout the entire product development process. In order to guarantee a widespread use, a worldwide industry standard is needed. This is where a new EU project called ACOSAR (Advanced Co-simulation Open System Architecture) comes into play.

There is already a widely used standard for the pure virtual world: the Functional Mock-up Interface (FMI). It allows any desired simulation models to be coupled into a simulation environment. A suitable standard for real-time systems that also addresses network communications is not yet available, but essential – because real-time simulations are indispensable when real components are used in an otherwise virtual environment. .

“With the definition of FMI as the standard for model exchange and co-simulation, sharing of simulation models across tool boundaries has become much easier. Users benefit from more efficient processes and entirely new simulation methods. Tool producers benefit from lower development and test effort because they only have to support one tool-to-tool interface, which is supported by numerous programs. FMI is a direct response to the requirements of the collaborative development process in the virtual engineering domain and has been adopted much faster than we expected. We anticipate similar results from the standardization efforts for real-time systems and test systems within ACOSAR”, says Torsten Blochwitz, R&D Manager at ITI and FMI Project Manager in the Modelica Association.

A new solution for all phases of distributed vehicle development

Today the development of new vehicles is distributed over many partners at many locations in many countries. This includes not only the development process with real components and systems, but also preliminary development with models and simulation.

Combining all these topologically scattered development tasks in all development phases at a single location is not feasible due to the high time and resource costs, so an interoperable solution is necessary. ACOSAR will provide it.

The project is tasked with developing an interface called Advanced Co-simulation Interface (ACI) that allows real-time systems (including systems from different producers) to be linked over topological distances to form a virtual, simulated overall system. A particular aim of the standardization activities is to significantly reduce the configuration effort necessary for this and thereby boost the efficiency of tests and simulations.

ACI enables automobile manufacturers and their suppliers to jointly develop complex systems efficiently and test them at an early stage (front loading). An example of these systems is the innovations in automated driving, where the individual components (cameras, sensors, logics and control systems) come from different manufacturers. In the case of environment detection for automated driving functions, for example, ACI would make it easy to integrate real sensors from different manufacturers into subsystems for system layout, so that the actual effects of the sensors could be taken into account very early in the design.

ACOSAR also opens up new application areas and thus revenue prospects for manufacturers of simulation tools and real-time simulation systems, since their systems can be used in combination with other components for increasingly complex tasks.

Comprehensive expertise from a broad partner landscape

ACOSAR is coordinated by VIRTUAL VEHICLE. A total of fifteen partners in three countries are collaborating on this project, including three major vehicle manufacturers (Volkswagen, Porsche and Renault), numerous leading suppliers (AVL, Bosch, dSPACE, ETAS and Siemens) and renowned research institutes.

Representatives from relevant standardization committees (FMI and ASAM) are also involved to enable the joint development of solutions and extensions for existing standards. To bridge the gap between the automobile sector and other sectors, leading representatives from the aviation sector and the rail transport sector (among others) also support the project as associated members of ACOSAR.

Clear benefits from ACOSAR

The ACI developed by ACOSAR will enable early tests and improved decision processes despite large topological distances between development partners. Automobile manufacturers as well as suppliers thus benefit from significant time, resource and cost savings.

There are also clear benefits for small and medium-size enterprises in particular. The planned standardization will give them access to sectors and business areas otherwise reserved for large companies.

Last but not least, ACI standardization creates an opportunity for the development of entirely new business models. Innovative forms of cooperation, such as test bench sharing or cloud simulation, can soon be implemented very easily and across company boundaries.

The project in a nutshell

The ACOSAR project has a total budget of EUR 7.9 million and is coordinated by the VIRTUAL VEHICLE Research Center in Graz. It combines the expertise of fifteen partners in three countries, including three major European vehicle manufacturers (Volkswagen, Porsche and Renault), numerous leading suppliers and service providers (AVL, Bosch, ETAS, ITI, Siemens and TWT) and renowned research institutes. During the three-year project period (starting September 1, 2015) the consortium can also be expanded with additional project partners.

The goal of the ACOSAR project is to define a specification for the methodical and seamless integration of virtual and real components. The industrial partners acting as end-users within the project will validate the outcome of the project with appropriate and relevant use cases.

Project management: VIRTUAL VEHICLE Research Center (Austria)
15 partners: Volkswagen (Germany), Porsche (Germany), Renault SAS (France), Robert Bosch (Germany), AVL List (Austria), dSPACE (Germany), ETAS (Germany), ITI (Germany), Siemens Industry Software (France), TWT (Germany), Spath Micro Electronic Design (Austria), Ilmenau University of Technology (Germany), Leibniz University Hannover (Germany), RWTH Aachen (Germany), VIRTUAL VEHICLE Research Center (Austria)
3 countries: Austria, France, Germany

About VIRTUAL VEHICLE

The research centre in Graz (Austria) is internationally recognized and works on methods and concepts for future vehicles, based on the long-term COMET K2 research program. In recent years the research center has also focused more strongly on funded projects at the national and European level and acting as coordinator for intersectoral EU projects.

Some 200 experts provide sound and extensive expertise in the areas of virtual development, hardware/software co-simulation and functional prototype testing, and validation of new concepts and methods. In cooperation with TU Graz, the centre offers a comprehensive testing and test stand infrastructure concentrated at a single location.

VIRTUAL VEHICLE forms an effective bridge between university research and industrial development. Close cooperation with renowned universities (in particular TU Graz as the main scientific partner) and leading industrial firms creates a new form of cooperation. The highly placed international network of VIRTUAL VEHICLE now includes more than 150 industry partners and 30 university research institutes worldwide.

Contact:

Dr. Martin Benedikt
VIRTUAL VEHICLE Research Center
ACOSAR Project Coordinator
martin.benedikt@v2c2.at
Phone: +43 (0)316 873 9048

http://www.acosar.eu – Project website
http://www.v2c2.at – Website VIRTUAL VEHIC

Media Contact

Elisabeth List idw - Informationsdienst Wissenschaft

All latest news from the category: Automotive Engineering

Automotive Engineering highlights issues related to automobile manufacturing – including vehicle parts and accessories – and the environmental impact and safety of automotive products, production facilities and manufacturing processes.

innovations-report offers stimulating reports and articles on a variety of topics ranging from automobile fuel cells, hybrid technologies, energy saving vehicles and carbon particle filters to engine and brake technologies, driving safety and assistance systems.

Back to home

Comments (0)

Write a comment

Newest articles

The Sound of the Perfect Coating

Fraunhofer IWS Transfers Laser-based Sound Analysis of Surfaces into Industrial Practice with “LAwave”. Sound waves can reveal surface properties. Parameters such as surface or coating quality of components can be…

Customized silicon chips

…from Saxony for material characterization of printed electronics. How efficient are new materials? Does changing the properties lead to better conductivity? The Fraunhofer Institute for Photonic Microsystems IPMS develops and…

Acetylation: a Time-Keeper of glucocorticoid Sensitivity

Understanding the regulatory mechanism paves the way to enhance the effectiveness of anti-inflammatory therapies and to develop strategies to counteract the negative effects of stress- and age-related cortisol excess. The…

Partners & Sponsors